Can I use more than one USB-6008 in the same program?

I'm working on a project that may require up to six modules USB-6008.  Before I buy more I need to know if I can use all six at once in the same Lab View program.  Can anyone help?

Hello Nick,

LabVIEW is capable of handel that the number of data acquisition tasks quite easily, but you have to remember that USB has a maximum bandwidth. Therefore, you have to make sure you have enough on your PC USB hubs. In general there are between two to four USB slots by hub and each of them will have a maximum flow rate which will be divided between all devices connected to this hub. So even if you can get four USB DAQ devices attached to four USB ports if they are on the same hub, you might notice significantly reduced rates of data transfer. I would say rather than buying six or more USB 6008, why not buy a PCI card that is able to handel a lot more entries with greater bandwidth.

Tags: NI Software

Similar Questions

  • Can I use more than one flash drive to ready boost on Satellite L650/0ed

    Hello

    I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

    In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

    Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

    Thank you
    -Brent907

    Hi mate

    Please check this Microsoft page that describes the ReadyBosst
    http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

    There, you can find this statement:
    + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

    I hope this can be useful!

  • Can I use more than one html5/js animation produced with Flash/createjs in a Web site?

    Hi, I produce animations with Flash which will be delivered in createjs html5/js hollow. The problem is that after including the first animation in my html Web site, the rest of the animations are crushed with the first, that is why, if I attempt to insert a second animation in my site, in fact, it will replace the first animation, I had already placed...

    I already tried the following:

    -change the default canvasID to another

    -Change the resources and namespaces Javascript in Createjs export settings

    -manually change the name of the functions (lib, img, syc) in the Javacript file

    None of them seem to solve the problem. So I'm now wondering if it is actually possible to insert more than one animation in a Web site...

    I would appreciate a quick response because I am working on a project with a very tight schedule and really need to address this question right.

    Thank you very much in advance for the help.

    Then, you have made a mistake.

    Start with the two different FLAS.  one with a red rectangle on the stage and the other with a blue onstage rectangle and nothing else.  publish your html and js files.

    combine the two into one and, if you have a problem, the postcode of your a single html file and two js files.

  • How can I create more than one CSS style for the text links?

    Hello

    Just like the title says, I need help to create more than one CSS text link style in Dreamweaver CS4. For example, I want that navigation on the site that I am building to have a style of link different text as a link in a certain part of the body copy. I played with Dreamweaver for awhile and can't find a way to do this. If it is still possible to do so, I'd appreciate any help.

    It is a common requirement in most Web sites.

    It's faster and easier to implement directly in Code view

    Good tutorial here

    http://www.Projectseven.com/Tutorials/CSS/Pseudoclasses/page3.htm

  • We have more than one PC connected to the same (IMAP) account, there is an error sending server and works as a single computer at a time.

    We have three computers to check the same email account (IMAP) and when more than one is not working and try to send a message is displayed:. 'Server offline [email protected] that the server may have dropped or there may be a network problem.
    Right next to Thunderbird on other computers, with only a computer connected to the error disappears, and everything works fine.
    When that happens, sometimes gives error when sending an e-mail, "error save message in sent" and the mail is not stored in the thunderbird or on the server, but is sent.

    Menu Tools > account settings > server settings > asvanced and reduce the number of connections from 5 to say 2 and see how it goes. I m the connection altogether on the total machines is the question can be reduced then should help.

    Seriously have several concurrent users is not a good way to manage an imap account.

  • How can I add more than 2 audio tracks on the same blade?

    Well, I'm just trying to include more than 2 audio tracks on the timeline. The audio tracks to be included in the project are around 10, but whenever I simply drag and drop a new track on this specific slide, which already has 2 (1 said track 1 (music video) and the other just track 3) I get a message asking me if I want to change the audio for this slide. Help!

    Hello

    Any individual slide can have only one "track". This is normally where will the audio narration. But if you want more than one audio clip to play, you can get there by inserting an object such as a box to highlight, configure it as basically invisible by setting alpha good value and cerebrovascular accident. Then by adding audio to the highlight box.

    Add a second box to highlight if you want a third clip to play. Repeat if necessary.

    See you soon... Rick

  • can I use more than one processor in Cluster HA

    Hi, I have a cluster HA 3 node with 3 servers esx 3.0.1 running. I have a new 4th server which is esx 3.5 and I want to use as a member of the existing HA cluster. I was told that I can use a 3.5 server in a HA cluster that uses esx 3.0.1

    I added the 4th node successfully to the HA by using Virtual Center Server cluster. When I try to vmotion an existing to the new node virtual computer, I get an error message relating to the processor type. The error message indicates that:

    "host processor type is incompatible with the requirements of the virtual machines to the CPUID level."

    How will I know if the new 4th node has a type of processor that should work in a HA environment with my 3 existing nodes?

    I was told that I could run an esx 3.5 in a 3.0.1 cluster HA (I'll upgrade all three 3.0.1 nodes in January).

    We said that the processors could be dofferent in a HA cluster but must be of the same type. The processors in the server are:

    PowerEdge 2950 intel xeon e5335 2.00 ghz (esx 3.01)

    PowerEdge r710 intel xeon e5504 2.00 ghz (esx 3.5)

    I want to confirm that these servers must work together using vMotion in a HA cluster?

    Thank you, Mark

    Hello

    You can create an EVC Cluster.

    Attached a screen with CPU compatibility.

    Also read this one

    http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1005764&sliceId=1&docTypeID=DT_KB_1_1&dialogID=53716504&StateID=0 0 54434575

    and this one

    http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003212&sliceId=1&docTypeID=DT_KB_1_1&dialogID=53716504&StateID=0 0 54434575

    MCP, VCP

  • Can I specify more than one master para to the mapping of the page?

    Hello

    I want to map the same master page to be used by the four different tags. Should I create a new line in the mapping for each table or can we separate the names of tags by a comma and a space, for example, 'body, Bullet, Heading1, Note "?

    I tried the latter and should work, but it did not.

    Thank you

    Sean

    >... to create a new line in the mapping for each table...

    That works and it has no side effects I've seen.

    It appears, moreover, that FM applies the Member from the first tag found para which has a MasterPageMaps table entry, so multiple matches per page, even contradictory, are not a problem, as long as obtaining the Member first found is OK with you.

  • VMFusion5.0.3:Why I can't use more than one processor in Win8

    I ran Win8 in VMware fusion 5.0.3 I put the CPU to use 2 CPUs Win8 but Win8 uses only 1, see the screenshot below. Is this a bug? Thanks for any answer!

    Win8InVMFusion5.jpg

    This is just the default presentation in Windows 8, 2012. You can change it by clicking on the graph and selecting ' change the chart of "->"logical processors.

    André

  • Can I add more than one horizontal separator to the PanelUI (new menu panel)

    Steps to follow:
    1. click on the new menu panel button (hamburger)
    2. click on customize
    3. on the left, drag 'Separator (for the Panel menu)' of 'Tools and additional features' in the Panel on the right. Appears in a horizontal separator. "Separator (for the Panel menu)" no longer appears in the 'tools and additional features.

    I can add the many 'separator' (vertical separator) on toolbars, but it seems that I can only add a "separator (for the Panel menu)" (a horizontal separator) in Control Panel.

    I would like to add additional horizontal separators in the Panel. Is it possible to do?

    Firefox version: 33.1.1

    Firefox does not come with a separator element in the palette to customize.

    You have the extension classic restaurateur theme?

  • I have Flash CC on a macbook pro and I can't put more than two audio files in the same scene. How can I do both play?

    Captura de pantalla 2016-01-22 a las 9.38.51 AM.png

    Access your library window. You should see all the audio files that you have imported into your movie. Choose the one that will play no and set to play in the "library" window There is a small play button at the top right of the preview window when you select the audio file. He plays this window?

    If he does not, he cannot be an able to interpret Flash audio file. Open the properties of this file and tell us what kind of file it is.

  • How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

    How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
     
    It's only 8.3% of disk space!

    http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

    The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

    Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

    http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

    Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

    We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

    We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

    Kevin.


  • How can I put more than one photo on a page to print?

    How can I put more than one photo on a page to print?

    Hello

    • What is the brand and model of the printer?
    • What version of Windows operating system do you use?

    You can check this link:

    Picture printing: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/picture-printing-frequently-asked-questions

  • Can I manage more than one license of creative cloud on the same adobe ID account or better create many ID adobe for my employees? Thanks for your response

    Can I manage more than one license of creative cloud on the same adobe ID account or better create many ID adobe for my employees?

    Thanks for your response

    In addition:

    Adobe uses based on the identity of license with a technology that will not support multiple licenses of the same type on an AdobeiD.  You can buy only one membership per Adobe ID. If you need two memberships creative cloud, you can buy each with a unique Adobe ID. You can also buy a creative cloud for membership of the teams, which allows you to buy and manage several places under an own account.

    Creative cloud for teams is for small and medium size organizations and is available as full a membership. Cloud creative teams is available on Adobe.com and through a global network of resellers. Learn more about Creative Cloud to teams.

    http://www.Adobe.com/creativecloud/business/teams.html

    FAQ: Where can I get information on creative cloud for the enterprise, education, Government and teams?

    I hope this helps.

  • can I use more than 2 devices for 1 account of creative cloud?

    Hello.

    can I use more than 2 devices for 1 account creative cloud?

    I know that it is limited to 2 devices for activation / account.

    Thank you

    You can, but you must disconnect from Adobe Creative Cloud app of any one of the 2 previous computers, so that you can activate on other computers.

    Connect and disconnect activate Cloud Creative applications

Maybe you are looking for