can I use my DAQ on two different computers?
Hello.
Sorry if this may seem a stupid question, but I'm trying to save money lol. I have two test stations, each station has its own computer and power. Power supply powers a certain device and the computer communicate with him via a converter USB to RS422 series. I use the 2 analog outputs on my NI USB DAQ 6008/6009 controls 2 power supplies. AO 0 to check power supply to the station #1 and 1 A0 to control the electric power in the #2 station. I can control these 2 feeds very well with a computer connected to my DAQ. But I need every computer to run trials independently. I don't have that 1 DAQ but 2 computers, is there way to use this data acquisition on both computers?
Thanks for any help!
I found the easiest way for me to do this is to run two VI on a single computer. Since I have 3 usb ports on my labtop, I can use 2 of them to communicate through series with two of my devices and the 3rd for the acquisition of data.
Thanks Knight of NOR to make clear on the use of 2 computers.
Tags: NI Software
Similar Questions
-
Hello! A purchased plan-program can be used on two computers?
Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-Windows or Mac has no importance... 2 on the same operating system or 1 on each
-Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)
-
Can I use the cloud on two different computers States?
I know that with a subscription, I can download on two computers, but I work from home in Georgia, while my office is in Pennsylvania. I cause any red flags if I have a download is on my computer at home in Georgia and other my download is on my computer work in Pennsylvania?
Lol just to use your Adobe ID for both and you'll be fine.
-
Can I synchronize the counters on two different computers in the C API?
I installed the M-series cards (6254) in several computers. I would like to synchronize the counters for each card. The best way that I came with to do this was to have the counter on each counter entries read a common external clock signal running at 10 KHz I have would then feed a second signal to each card and trigger the task that runs each counter starts when the second line goes high.
Following the examples provided with the C API, it was easy to get each card KHz signal and then to match the beginning of the counter that I tried to read
DAQmxCfgDigEdgeStartTrig (taskHandle, inputLineStr, DAQmx_Val_Rising);
However, this did not work and gave me the following error:
DAQmx error: the specified property is not supported by the device or is not applicable to the task.
Property: DAQmx_StartTrig_TypeTask name: task
State code:-200452
End of the program, press the Enter key to exit
I know it's very simple sync the cards within a computer using the RTSI interface, but it is not possible that my cards have to reside in different computers.
It is even possible to synchronize the counters on computers, and if yes how can I do it with the C API?
------------------
Here's what I've written so far:
#define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
int main (void)
{
int error = 0;
TaskHandle taskHandle = 0;
uInt32 data = 0;
tank errBuff [2048] = {'\0'};DAQmxErrChk (DAQmxCreateTask ("task", & taskHandle));
DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle,"/Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_CountUp));
DAQmxErrChk (DAQmxConnectTerms ("/ 10MhzRefClock/Dev1", "/ PFI8/Dev1", DAQmx_Val_DoNotInvertPolarity));
DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev1/PFI14",DAQmx_Val_Rising));DAQmxErrChk (DAQmxStartTask (taskHandle));
printf ("without interruption of the poll. Press Ctrl + C to interrupt\n");
While {} (1)
DAQmxErrChk (DAQmxReadCounterScalarU32(taskHandle,10.0,&data,));
printf ("\rCount: %u", data);
fflush (stdout);
}
Error:
puts("");
If (DAQmxFailed (error))
DAQmxGetExtendedErrorInfo (errBuff, 2048);
If (taskHandle! = 0) {}
/*********************************************/
Stop DAQmx code
/*********************************************/
DAQmxStopTask (taskHandle);
DAQmxClearTask (taskHandle);
}
If (DAQmxFailed (error))
printf ("error DAQmx: %s\n",errBuff); ")
printf ("end of the program, press the Enter key to quit\n");
GetChar ();
return 0;
}
Hi neurostu,
Arms start triggers are disabled by default, so they do not have a default PFI line.
You will need to set some properties DAQmx to configure a trigger for start of arms. Try adding between DAQmxCreateCICountEdgesChan() and DAQmxStartTask():
DAQmxSetArmStartTrigType (taskHandle, DAQmx_Val_DigEdge);
DAQmxSetDigEdgeArmStartTrigSrc (taskHandle, "/ Dev1/PFI14" ');
DAQmxSetDigEdgeArmStartTrigEdge (taskHandle, DAQmx_Val_Rising);
You have the file "help NOR-DAQmx C reference"? It should contain descriptions of the trigger > more > arm Start properties.
Brad
-
My boss wants me to take my computer adobe so two other Associates can have instead. He's also under my name and need to change its name. Is this possible?
Would you sign out of your Cloud account to disable your computer existing... the account change requires Adobe
This is an open forum with a mixture of program users and staff of Adobe, Adobe support... you need Adobe support
Coordinates of Adobe - http://helpx.adobe.com/contact.html can help
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
Can I download my apps on two different computers with the same CC membership?
An iMac, a PC (Windows 7). Download the applications on both computers?
Of course, you can download on any 2 computers according to your choice.
You can install on a Windows and a Mac. or 2 Windows or Mac 2
-
original title: Microsoft Netmeeting
Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too? NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP? Can we use NetMeeting on Windows XP Home Edition or XP Professional? We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity. . You want to use NetMeeting for tutoring purposes.
Hi Rafael,
Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.
How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005
-
You can use the x 86 version and the x 64 version on two different computers
I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?
Hi hgcxngv,
No - not at the same time. A key is an installation by the license agreement (regardless of the size of bits). Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).
You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).
The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).
I hope this helps.
Good luck!
Kosh
-
If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe
This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:
..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.
You can also see:FAQ: where can I find the terms of membership and the terms of use?
-
Can I manage a site using two different computers using Dreamweaver CS6?
Can I manage a site using two different computers using Dreamweaver CS6?
Yes, by using Check In / Check Out and a computer do not replace the work of the other or create copies in conflict.
-
wrong message: identity adobe already used on two different computers
Hello
I have an adobe acteuell identity. He since 2005 are registered products, currently I use CC (annual duration) and Premiere Elements on Mac OS on an iMac.
As I read, my license to use the software on two computers.
Now, I configured a laptop computer with WIN10 and want to install Lightroom.
Unfortunately, I get the message of this identity of adobe, already used to activate the software on two different computers. This message does not match the facts. Activated the single device namely seems only imacW.local. Although I installed on my ipad LR, I haven't needed, because it is not very easy to use, but I guess that this circumstance for my problem is meaningless, since this unit is also not displayed as enabled and so I could not turn off it.
For completeness: I've always found an 'old' and unused adobe identity, I is not necessary and can be deleted. There's a free subscription to creative cloud (probably for a long time exceeded) - but no device! -registered. Maybe it's 'second computer?
Wolfgang
The message of the two active facilities apply only to one account. Maybe did you sign twice without having signed the time?
-
Is it possible to use two different computers with the same adobe - ID and the same adobe license?
Hi Morten,
Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.
Please let us know if you have any questions, more about it.
-
If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?
Please see this link for more information on the installation of creative cloud on multiple computers:
-
can I use the license on two computers
I have all ready creative cloud installed on my macbook. Now, I also have an iMac and I want to use, for example, lightroom also on the iMac. Can I use my license on two computers?
Yes, your subscription allows to have two working facilities.
-
If I buy 5 Lightroom can I install on two different computers?
If I buy 5 Lightroom download on two different computers?
As they are for your use, Yes.
Maybe you are looking for
-
Scratches on Apple Watch Sport
I have a Apple Watch sport and I was recently noticed a large number of scratches have been forming is there a way I can get rid of the scratches without get the screen replaced?
-
HP Deskjet F2420: Header print OK, no body.
When you print a Word document, only the header is printed, not the main body.
-
Key board works very slowly after installation of service pack 2 visa and the mouse is very slow to move
-
Hoe komt het dat als ik p.c. opstart ik lack keer het bericht dat the system treat is hersteld van een ernstige hell. Of handtekening van of hell is: code 1000008e JIU. BCP1 BCP2 0000005 BD210CDC BCP3:AB9D287C BCP4 00000000 SP:3 OS Ver: 5 - 1-2600-0
-
Windows updates not working not - code error 0xC800042D whenever I try
When I try to update I get error Code: 0xC800042D - I was able to do some updates, but now it gives me this error code every time. I'm not a computer expert - I just want to update. I use the feature Microsoft Fixit and he "fixed" the problem but s