Can I use my private VPN site?
How dns aliases in settings configuration ff?
10.78.1.14 mysite.loc
to go through the vpn
If your VPN connection fails DNS resolution for mysite.loc, you can always enter the IP address in the browser's ADDRESS bar. That is, instead of http://mysite.loc, use http://10.78.1.14.
Tags: Firefox App
Similar Questions
-
Can I use the "Private browsing" mode on mobile?
Can I use the "Private browsing" mode on mobile?
Firefox for mobile has not yet a private browsing mode integrated. However, you can make the navigation in a separate or temporary, profile by running "fennec Pei" in app the N900 Terminal, or by using the Profiles Mobile add-on.
-
What can I use on a dating site photo galleries and if yes can I use photos with people in them.
It would be contrary to terms of use photos with people in them on a dating site.
-
After downloading 20 FF, I can't use the private browsing.
Hello
I can't use the incognito since download 20 FF. I have Win7/64-bit Home Premium edition. I checked the help articles, but this go to the "Firefox Button" at the top of the window. I do not have this button. I would be grateful for advice, which I find very useful private browsing. Thanks for a brilliant and constantly improving browser.Hi raycer27
How to find private browsing now:
<File> <new private window>
Sounds simple, isn't? Well it me puzzled too at the beginning!
Hope that helps. -
Can I use and modify a site offline after the end of a subscription?
Plans to try Muse for a month to generate a shell for my main and mobile site versions, I do not want to pay long-term for design software which can be used once or twice a year. The HTML/CSS files that are out of order will be easily editable (as exchanging images in a gallery of images, including the main purpose of my site. Suppose the number of images will change), or is there some obfuscation involved owner? I'm fairly well known with the HTML, but as the idea of a purely visual interface for some things. Thanks in advance.
Hello
As you said, you are good with html, so you should do in any html editor. But in case you need to change the design using muse, you'll need subscription, but no subscription required for the html or css generated by Adobe Muse.
Hope this helps
-
VPN site to site by using the host name on cisco asa 5540 - dyndns
Can someone help me configure VPN site to site on cisco asa 5540. The other end is seen configured dyndns and so should set up her counterpart with the host name.
If the other end is a dynamic IP address, you must configure a dynamic map and then use in the encryption card
See the following example.
-
Can VPN site-to-site with just 1 static IP address in PIX?
Hi all
Can I use pix for VPN with just 1 static IP address as follows:
LAN-A---PIX1---INTERNET---PIX2---LAN-B
Just PIX1 has static IP, PIX2 use DHCP from ISP. I have the config this type of VPN with another brand equipment. But the use of PIX, I just VPN config with both ends have a static IP and I can't find any information in the web site. Because when config VPN site-to-site I have to use the command 'same game '.
Can someone tell me how can I do with PIX? Thank you!
Best regards
Teru Lei
You just need to set up a dynamic encryption on PIX 1 card and a card standard encryption with a peer 'set' on 2 PIX. Here is an example configuration:
http://www.Cisco.com/warp/public/110/dynamicpix.html
Note that it also has VPN connection clients in 1 PIX (Lion), so forget all orders of "vpngroup" that you see in his configuration cause, they are not necessary for your scenario.
-
VPN Site-to-Site with IPS Inspection
Hello friends,
A simple question:
Its possible to have IPS inspection (software IPS in the family X, not the SSM module) with the Site to Site VPN environment?
In other words, can I use firewall with VPN IPS inspection in the same?
Rafael
Yes, site to site traffic can be inspected with the IPS module. Only clientless SSL-VPN-traffic cannot be inspected by IPS.
Sent by Cisco Support technique iPad App
-
Using addresses private on vMotion interface
Can I use a private on a vMotion interface address (I have a separate interface for connections to management with a public address) when I use vCenter remotely?
My configuration is:
vCenter server at a remote site. IPs for vCenter and management of ESXi host interfaces are public and routable.
2 ESXi - both servers are connected to vCenter on vSwitch0 management interface.ESXi hosts have vSwitch1 with a single NETWORK card using a private address that is not routable to vCenter.
Both ESXi hosts can see each other on the VLAN vSwitch1 using private addresses.
The vnic on vSwitch1 for both ESXi hosts is a verified with only vMotion vKernel interface.
So the question is, if I can connect to vCenter management interfaces on hosts, will work the vMotion although vCenter cannot connect directly to interfaces vMotion?
That you configured is actually the recommended way to configure vMotion (excluding redundancy). vCenter Server does not need to access vMotion network, it is only important that guests are able to communicate through it.
André
-
VPN site-to-site between router 831 &; windows 2000
We have a Cisco router 831 in a site and windows 2000 Server as a router to another site. Can we set up a vpn site-to site between these two sites? If so, how? Or point me to the link.
This should get you:
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00800b12b5.shtml
-
Primary domain server admin can be used to control the server managed in the secondary area?
Hi Experts,
I have 2 boxes of unix, and I have 1 installation of weblogic on each (primary) and secondary site.
The implementation is as listed below:
PrimarySite
MainDomain: 1 Admin Server, managed server 2, 1 cluster
SecondarySite
MainDomain: 1 Admin Server, 2 servers managed, 1 cluster
Questions
1. can I use Admin Server primary site to control/manage servers managed at the secondary site and use the secondary site to control the server managed in the main site?
2. I'll be able to have smooth failover and replication of cluster1 session in a primary site to cluster2 in the secondary site.
Tumi
(1) server of a Domain Admin cannot control all servers managed from any other domain.
(2) a load balancer allows you to switch between sites and implement cross-cluster replication as described in the link below: failover and replication in a Cluster -
Cisco IOS VPN Site to Site use SHA2 interoperability with Swan
Testing a site to site VPN between a Cisco 2921 router to Strongswan VPN server. Using IKEv2 and can create a virtual private network between the two if I use SHA1, no matter what version of SHA2 (256 or 512) is not build. Config is IKEv2 AES-256, SHA512, DH14 (Transform is ESP-AES-256 / HMAC-SHA512-ESP), working config is IKEv2 AES-256, SHA1, DH14 (transform is ESP-AES-256 / HMAC-SHA-ESP).
Pre-shared key is good, I Exchange SHA2 SHA1 and VPN rises. Check the logs on the Swan watch the integrity check fails when we selected SHA2 (any version). Packet Capture from the SHA1 and SHA2 sessions do not show really big mistakes or differences (aside from the SHA differences). I was wondering if anyone has seen this problem?
Chad,
The failure of integrity is in the verification of the hash of the packets.
I am not aware of recent anythign on our side, but I guess you are running 15.2 (4 M) or more recent version? We support suite-B on the ISR G2 of this version.
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a0080bfe11c.shtml
The problem you describe could be explained in a problem in negotiating between IOS and stongswan. If you are interested to investigate, open evidence of the TAC, let's pull debugs and see what happens.
M.
-
VPN site to Site using the router and ASA
Hello
I have a Cisco 1812 router that is configured for remote access VPN using IPSec (Cisco VPN Client), my question is if I can configure a Cisco ASA 5505 to connect to the router as a VPN from site to site.
Thank you
Karl
Dear Karl,
Yor are right, in this case you can create a tunnel vpn site-to-site between devices or you can configure your ASA as hardware VPN client. That is to say; Easy VPN.
For the same thing, you can consult the document below.
Kind regards
Shijo.
-
VPN site to Site on both ends using Cisco 871
I would like to configure VPN Site to Site using the Cisco 871 templates at both ends, but a hard time to set it up. Can someone tell me how to do or if you know of a link that may help me set up as soon as possible?
I can learn it, but it's time that banned me in the implementation. The other end is already configured to provide Internet access to all users.
Tom,
########################################################################################
Router 1 VPN config:
Internal = 10.0.0.0/24
Public = 196.1.161.65access-list 101 permit ip 10.0.0.0 0.0.0.255 10.193.12.0 0.0.3.255
access-list 102 deny ip 10.0.0.0 0.0.0.255 10.193.12.0 0.0.3.255
access-list 102 permit ip 10.0.0.0 0.0.0.255 anyIP nat inside source list 102 in interface (check the name of the external interface) overload
crypto ISAKMP policy 10
3des encryption
sha hash
Group 2ISAKMP crypto key cisco123 address 196.1.161.66
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
MYmap 10 ipsec-isakmp crypto map
defined by peer 196.1.161.66
Set transform-set RIGHT
match address 101interface (check the name of the interface inside)
IP nat insideinterface (check the name of the external interface)
NAT outside IP
crypto mymap map########################################################################################
Router 2 VPN config:
Internal = 10.193.12.0/22
Public = 196.1.161.66access-list 101 permit ip 10.193.12.0 0.0.3.255 10.0.0.0 0.0.0.255
access-list 102 deny ip 10.193.12.0 0.0.3.255 10.0.0.0 0.0.0.255
access-list 102 permit ip 10.193.12.0 0.0.3.255 allIP nat inside source list 102 in the fast4 interface overload
crypto ISAKMP policy 10
3des encryption
sha hash
Group 2ISAKMP crypto key cisco123 address 196.1.161.65
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
MYmap 10 ipsec-isakmp crypto map
defined by peer 196.1.161.65
Set transform-set RIGHT
match address 101interface vlan1
IP nat insidefast4 interface
NAT outside IP
crypto mymap map########################################################################################
The above is an example of configuration.
It is always recommended to change the pre shared key to something else.Federico.
-
VPN Site to Site Secret shared and can co-exist RADIUS authenticated VPN?
Hello
I have a setup VPN site to site between two offices on 515Es PIX (v.6.2 software) and has recently added a vpngroup/shared secret based VPN remote access to one of the offices. Given that just forced me to add a number of different policies to my existing crypto card, it was a plant direct and easily implemented. For more security, I want to use a RADIUS server to give to each remote user their own connections and profiles rather than a group on all password is configured. To do this, however, it seems that I have to add the following additional commands to my existing crypto card:
client configuration address map mymap crypto initiate
client card crypto mymap RADIUS authentication
These do not correspond to the policy number (my site-to-site is 10, and remote access policy is political 20), so I don't know what the effect would be if I added the. It would cause my connection from site to site for authentication RADIUS request (a very bad thing)? If so, do I need another interface to bind a new encryption card to? The answer to this would be greatly appreciated!
Also, if anyone knows an example configuration for a similar configuration, I can look at, please let me know! Thank you.
-A.Hsu
For the site to site connection, you change line isakmp keys and add the parameters of "No.-xauth No.-config-mode" at the end of this one, which tells the PIX not to do the auth RADIUS or assign an IP address, etc. for the specific site-to-site tunnel.
Example of config is here:
http://www.Cisco.com/warp/public/110/37.html
Note that there is no command options I have just said, I just sent an email to the web guys to fix this. Basically, your config will look with the options "No.-xauth No.-config-mode" on the line «isakmp x.x.x.x key...» "for LAN-to-LAN tunnel.
Maybe you are looking for
-
Firefox change of tabs instead of scrolling arrow keys up/down-webpage
I'm used to use Ctrl + tab to switch between tabs, then the up and down arrows to scroll through a Web page. recently the tabs up/down switches instead of scrolling unless I have first click on the web page. It's very annoying that I always oriented
-
I have a small program to store my names of genealogy and the jpg images of the Census pages where each name is found. The images have a thumbnail link which opens in a new tab to display the page real oversized census. In the new tab page of the cen
-
How can I re - configure the apple ID
I just bought an Apple Watch Best Buy Open box and when I went to pair he took up with someone else's apple ID. How do I re-set so I can pair it with my iPhone and my apple ID
-
What should do? SansaClip vs Rhapsody...
I'm so frustrated. If I had known that my wonderful little mp3 player was going to be connected with a (in my opinion irritable) org $$ just like Rhapsody and all (almost), possible on music and PAY - FOR services, I would have kept looking for anoth
-
Reference Dell Webcam does not work do not take pictures or record video.
I can't get the thing appears on the screen to take pictures or record video when I click on the icon. Help please?