Can I use parallel mode and multiplex?

Hello

I have

NI USB-6259 data acquisition Module (two connectors for cables two SCXI-1349, which connects the DAQ chassis)

SCXI-1001 chassis

3 modules of filter lowpass channel 8 SCXI-1143

and

an end before SCXI-1180 plate

The DAQ has 16 channels of AI diff., I want to drive two SCXI 1143 in multiplexed mode (connected to connector 0 to USB-acquisition of data through SCXI-1349) and the other in parallel mode assigned to AI 8-15 (connected to the connector 1 USB-acquisition of data through SCXI-1349).

The configuration is approved by MAX

But when I run it with the software I get an error message indicating that a simultaneous sweep is possible error-223835. And that the selected channel is not in the task Error:-200486.

(Such as the NI USB-6259) DAQ hardware can be attributed with channels 0-7 in multiplexed mode (multiplexing two SCXI 1143 8 Channel) and the rest of the channels in parallel mode for SCXI adapter? NEITHER USB 6259 must connectors separated, but he is still regarded as a data acquisition card?

What does the error say? I thought that I have configured for simultaneous scanning.

Attached to this post is a photo:

Top left: back of my case NI USB-6259

Top right: view from the front of my chassis with three SCXI 1143

Below: Rear view of the chassis. Two SCXI 1249 are connected to two cards. One card must be run in parallel mode, two in multiplexed mode.

See you soon,.

Alex

The following connection States:

"In parallel mode, you can use that one module by hardware DAQ digital; You must connect all other modules in the chassis, in series, or parallel mode to a different DAQ hardware. »

What SCXI Modules are capable of running in parallel Mode?

http://digital.NI.com/public.nsf/allkb/3D45A66A691E4BD886256A6C004A4313?OpenDocument

So you need a separate DAQ hardware for each module.

Raphael

Tags: NI Hardware

Similar Questions

  • Can only use safe mode and can not access anything except firefox

    Basically, there are a few days all of a sudden, a box came up saying Windows Explorer has stopped working. No matter what I click, it returns constantly to the rear. Because I use firefox, I can't to anything except this, and I can't get him if I use safe mode.
    It is terribly annoying, I have 6000 + photos and other things I need, i.e. duties.
    How can I fix? I can't use the normal mode, and it's annoying.
    Thanks in advance.

    Then download your data either by:

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

    * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

    http://www.Knoppix.NET
    http://www.nu2.nu/pebuilder/ - Bart PE Builder

    Then do a restore clean factory/install of Windows.

    I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

  • My computer has a virus, can I start safe mode and download the scanner software?

    My daughter has a virus on his computer and he was arrested for perhaps a year. Can I try and see if it will boot in safe mode and down load a service of scaning as Mirco soft essentials for a scanner or Malware Anti-malware bytes. I guess my question main you can down load a program in safe mode.

    Hello

    Of course you can. Use safe mode with networking to download directly on his computer--several times
    as you start the computer, press F8.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be harder to detect as
    the cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
    It will display all the infections in the report after you run - if it will not run changed the name of
    TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
    check with the other methods below.
    http://support.Kaspersky.com/viruses/solutions?QID=208280684

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    SuperAntiSpyware Portable Scanner - free
    http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    After the removal of malicious programs:

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    ======================================

    If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
    MALWARE IS STILL PRESENT).

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    =======================================

    For extreme cases:

    Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
    This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
    uses aggressive methods to detect these threats, there is a risk that it can select some
    legitimate programs for removal. You should use this tool very carefully and only after
    you have exhausted other options.
    http://us.Norton.com/support/DIY/index.jsp

    ================================

    If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
    See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
    see your subsidiary local Support site.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I am running XP and I can't use my keyboard and Device Manager is empty.

    I am running XP and I can't use my keyboard and Device Manager is empty. I also have problems with my other computer also running XP and it will only start in safe mode. I tried to restore, and when it restarts it still will not start normally. Help, please

    Hi margaretbrown,

    · What is the number and the model of the computer?

    · Also provide the model number brand of na on the keyboard?

    · What is the service pack installed?

    · Do you remember all the recent changes on the computer before the show?

    Try the steps listed in the link below: No. options appear in the Device Manager list when you open it: http://support.microsoft.com/kb/311504

    And the computer on which you are unable to start up normally, try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

    my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

    Hello

    As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

    http://support.Microsoft.com/kb/310353

    If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I have version 4. I can't use develop mode. How can I fix?

    I have version 4. I can't use develop mode. How can I fix?

    Thanks for the reply. I solved the problem by uninstalling the CC version and install the latest update of version 4.

    Sent from my iPhone

  • Can I use my TV and roku to my screen

    Can I use my TV and roku to my screen

    Hi diana_tanner:

    1. If by the TV and roku you mean that sending the video URL to your roku hooked up to your TV, then the answer is Yes to the current version of Firefox for Android, Firefox for Android 35. Here's how: https://support.mozilla.org/en-US/kb/use-firefox-android-send-videos-your-roku
    2. If you want to tell your TV via roku mirrored to a Firefox tab then the answer is NO until 36 of Firefox (which will be released on 24 February). You can try this feature on 36 Firefox beta, which is available on the store to play now. Here's how: https://support.mozilla.org/en-US/kb/view-webpages-on-tv-roku-and-firefox-android
  • I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

    I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

    What happens when you try to use the network?

  • Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

    Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

    Does anyone have recommendations?

    The original charger is International, all you need is a converter of pin code.

  • Can I use Windows Xp and Windows Developer Preview to even?

    Can I use Windows Xp and Windows Developer Preview at the same time without using a virtual machine?

    You can dual boot XP and Windows 8 Developer Preview.

    How to Dual Boot Windows XP and Windows 8:
    http://www.intowindows.com/how-to-dual-boot-Windows-8-and-XP/

    For the operating system Windows 8 Developer Preview General questions:
    http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

    Windows 8 Developer Preview
    From the download page:
    The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  • Snip can be used to copy and paste If yes how

    original title: snip

    Snip can be used to copy and paste If yes how

    Hello

    I guess that you are talking about the tool captures.

    Open the capture tool , and then select Options.

    Place a check mark to always copy shears in the Clipboard.

    Click OK.

    Click new, select the part of the screen that you want to cut out. When you release the mouse button, the selected area will be copied to the Clipboard.

    Open a program that can display images (Paint, Wordpad, MS Word, etc.).

    Right click in the program and select Paste.

    The area of the screen that you snipped will be pasted into the program.

    Let us know the results.

    Concerning

  • I click on start and go to help and Support application, but a pop-up appears «Microsoft compilation error code 800A03EE, can be used to help and support...» Help

    "When I open start and click Help and support, it opens the page, but when I click on one of the options, as the information systems, troubleshooting or Ant other option a square small pop-up appears with the following message" Windows Script Host

    Script: C:\windows\help\oem\scripts\Launch.jse

    Online: 1845

    Char: 3

    Error: Expected ') '

    Code: 800A03EE

    Sourse: Microsoft JScript Compilation error

    For this reason pop until I can't use the help and support that came with the HP Pavilion notebook PC

    HOW THIS CAN BE SOLVED? Help please

    Will search for your answer

    Hi Petey61,

    ·         Did you do changes on the computer before the show?

    ·         Why you try to open the help and support?

    Follow the suggestions below for a possible solution:

    Method 1: Try the SFC (System File Checker) scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2:

     

    Step 1: Create a new user account.

    Follow the link below to create a new user account and check if the problem persists.

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    If the problem is resolved, the fix for the damaged user account.

    Step 2: Difficulty of damaged user account.

    Follow the steps in the below link to fix a corrupted user account.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    It will be useful.

  • Hi, I have cs6, indesign, and I can't use the black and the white arrow. I just bought the cs6. can someone please tell me what I did wrong. Thank you, alexandra

    Hi, I have cs6, indesign, and I can't use the black and the white arrow. I just bought the cs6. can someone please tell me what I did wrong. Thank you, alexandra

    https://helpx.Adobe.com/InDesign/KB/InDesign-tools-panels-Don ' t - respond.html

  • How can I use Tracert to and ESXi 4.1 host?

    How can I use Tracert to and ESXi 4.1 host?  I tried Tracepath and get "command not found", like tracert. I sswear I did this before 3.0 days.  I looked in/usr/sbin not tracepath or tracert.  I don't know I'm missing something very obvious.  I do not have access to this host console, but I ran the "check network connections" of the console and he spent when I place this host.

    ESXi is not a Linux console as ESX 3.x did. He uses a tiny console shipped based on busybox and missing most of the commands that would be available in a full Linux installation.

  • Can I use the dumps and CacheLoader?

    Can I use the dumps and CacheLoader without TopLink?

    Yes, here is an example of dumps...

    http://coherence.Oracle.com/display/COH34UG/sample+CacheStores

Maybe you are looking for