Can I use the card WiFi Intel 3362U-1MPC in Satellite A30-203

Similar Questions

• Using the card wifi Intel N5300 T420

  First post.

  The card wifi Intel N1000 on my T420 just broken and I have a T400 sitting there for years. I wonder if I can use the wifi card in to work with T420 T400.

  The card wifi T400 Intel N5300's is a full-size PCI-e card

  The card wifi T420 is intel N1000, it is a half-size PCI-e card

  In T420, there is a position near the site of the ram to the back of the portable computer, which can operate with a PCI-e size. Is it possible to intall the Intel N5300 here? Or that there is WAN only?

  Thank you

  McDull

  It won't work.

• I can't use the card wifi on my laptop. It shows that the signal is strong, but I'm unable to visit Web sites in Internet Explorer.

  original title: error WiFi

  I can't use my WiFi on my laptop.  It shows that the connection is made and the signal is strong, but can not use Internet Explorer.  WiFi switch is on.  I tried the Windows button more X and that did not help.  I get an error message: the NIC "Realtek TRL8187B Wireless 802. ' 11 b / g 54 Mbps USB 2.0 Network Adapter "experiencing driver or hardware related issues.

  Hello

  Get the latest drivers from the support site for the computer and try to install after you remove the old drivers.

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• Need for Atheros WLAN Card PA3212U-1MPC for Satellite A30-203

  Dear all

  I have a satellite A30-203 and I update to wireless, I checked the non-mandatory part but I can't buy one any where.

  I am looking to buy a NIC without WIRELESS ATHEROS PA3212U-1MPC

  I can't find anywhere in the United Kingdom that sells them someone can point me in the right direction.

  Thank you very much for your efforts.
  Tandy

  Hello

  I can't believe that this card is not available in him come UK on guy have you tried to google for this Atheros Wlan card?
  I think that a lot of dealers online is able to order this Wlan card

  By the way; You can order all the compatible parts at the Toshiba authorised service provider in the United Kingdom.
  Maybe the guy can help you it's worth a call

  Good luck

• I have an ACER Aspire One model ZG5/A150 can I put the card WIFI B/G card WIFI B/G/N

  I have an ACER / Aspire One model / ZG5 / A150 may update the WIFI B/G card for a WIFI B/G/N card?

  My system (Windows XP) will make use of the new speed of the upgrade card?

  If you are familiar with the process, yes you could upgrade the wireless card and Windows XP would be able to use the speed of upgrade, subject the new wifi card you select has Windows XP drivers available.

• Can not use the card PXI controlling SCXI for something else

  Hi all

  We have a hybrid chassis of 1052 with a PXI-6221 (control of the special SCXI version) into the slot of the 8th and, while it allows us to access map of the SCXI-1540 module without problem, if I try to add the NI PXI-6221 to the list of data acquisition cards to read the definition of system files or I make reference to any channel in a task of analog input (custom device) it is telling me that the resource is reserved. When I list the card in the system definition file, it gives the error message even if I turn off the single-point support timed by the hardware.

  I went back to the documentation for the Web site and I couldn't find a place where it says you need a card PXI for controlling SCXI cards but that the PXI card controls became useless.

  I'm doing something wrong?

  Thank you.

  Dear Claudio_G,

  That should really be a limitation in VS2011 because there are future news added since VS2011.

  And the reason why it works in the custom device could be the one custom unit as PXI6221 and SCXI1540 are separated internally in which the task and VS that it works in the same task.

  Then when it works properly in the custom device I recommend to use this way or other wise update to VS2013.

  Kind regards

  Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |

• can not use the card slots to post my camera photos gallery of windows crashes

  No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

  No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

  ======================================
  Just a guess... but if the photos are originally Photo
  Gallery crashing... you can shot in RAW format
  format. For example... Nikon RAW files have a. NAVE
  extension and Canon RAW files have a. CR2
  extension. If this is the case, install the
  After the codec pack could solve the problem if
  your camera is included:

  Expand the 'Détails' section to see supported devices.

  Microsoft Camera Codec Pack
  http://www.Microsoft.com/download/en/details.aspx?ID=26829
  (Windows 7, Windows Vista Service Pack 2)
  This package will allow RAW supported
  camera files visible in Windows Explorer

  And...

  Maybe you can copy your pictures to a folder on
  your hard drive as follows:

  Insert the memory card into the correct location on the media
  Drive... If open windows... Close them.

  When the card is inserted... If you go to... Reach... Start /.
  Computers / devices with removable storage... is the
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left
  by clicking on the drive letter that corresponds to the memory
  card slot should display the directory of the card and you
  can copy and paste or drag and drop the photos of your choice
  in a folder on your hard drive.

  Just a select group of photos do a right-click and choose...
  Copy... then navigate to the folder you want in and
  Right-click on the folder and choose Paste.

• How to find the card drivers Intel graphics for C satellite series?

  Hello world!

  I have graphics HD Intel (r). I tried several times to install its driver but it never succeeds, it says modified Toshiba and I can't find the driver anywhere... Please help me, this is all the information on my graphics card:
  Graphics Intel® HD (Pentium)

  Report date: 02/06/2013
  Report time [hr:mm:ss]: 13:9:43
  Driver version: 8.15.10.2189
  Operating system: Windows 7 Service Pack 1 (6.1.7601)
  Default language: French (France)
  DirectX * Version: 10.0
  Physical memory: 3890 MB
  Minimum graphics memory: 32 MB
  Maximum graphics memory: 1696 MB
  Used graphics memory: 77 MB
  Processor: Model Intel64 family 6 37 Stepping 5
  Processor speed: 1995 MHz
  Vendor ID: 8086
  Device ID: 0046
  Device revision: 02

  PS: Sorry for my English, I'm french

  Need us information on your laptop.
  Please post the exact model name and model number.

  In any case, it is recommended to install the driver for the Toshiba download page only if you can find the latest version of the driver on Toshiba support page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Can I use the car adapter More4You PX1189E-1NPO with Satellite A100?

  Hello
  I have the car more4you PX1189E-1NPO adapter and the Satellite A100-169 power supply 15V witch.
  Adapter and this laptop work together?
  (On the car adapter it is written: 'Use with all portable Toshiba up to 19V dc 6.3Amps').
  And Toshiba.eu says:
  UTES & OPTION_ID = 98981 http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/individualOptions.do?service=EU&action=SHOW_ATTRIB & tab = 1 #1
  "The adapter adjusts, conditions and regulates the power of entry to the correct voltage required for your notebook."
  On the Site of Toshiba Switzerland they even say it regulates to 15V.
  If I can use it with my laptop 15V, isn't?
  BR
  Phil

  Hello

  Jordan is right, he wasn't. I have the same card and the card is really just for the machines of 19V. It s easy to find, just look at the site of the compatible machines and you will be
  mention that each of these machines is a 19V machine.

  I think that that s a mistake of misunderstanding of the administrator of the site or who designed the site, then believe me, buy another, which is 15V and not to 19V.
  And Don t manual work on something that has been built and certified for this and for this machine. Believe me, this connector is already the right one for the machines according to,.
  Thus, if your machine is broken because you have modified the original equipment, then your warranty will be revocated and your machine has disappeared.

  Welcome them

• Can I use the drive HARD internal extra for my Satellite A200-1 to 9?

  Hello, new to these forums,

  I recently bought the A200-1 to 9, and I'm very happy with it. I was interested by the addition of an extra internal HDD to the exisitng 120 GB one. I obviously did not have enough research I bought a Toshiba MK2035GSS: 2.5 "HARD 200 GB drive thinking it would be slot directly into the spare slot and it doesn't.

  So, really, I'm looking for some advice if I can add an extra internal hard drive and if so what model and how. After taking the back cover it looks like the aura of the place for another drive, even though I'm not sure if correct connections are there, or maybe if the space is used for something else.

  Any help much appreciated.

  Thank you
  Martin

  Hello Martin

  As far as I know that some A200 models come with hard drives 2. because of this Toshiba laptop brand standard chassis. All A200 models use this standard chassis. Your A200 comes with a single drive HARD and because of this place for the second disc is empty. This does not mean that you can use the second HARD drive.

  I have the same laptop as you and in my case there is no any prepared for second HARD drive HARD drive connector.

• Can I use the right button to play WinAmp on satellite?

  How can I change the playbutton rightsided to open other stuff, like winamp?

  can someone help me?

  Thank you

  Arne

  First of all, it would be very nice to know you details laptop but usually it of not possible to use the Toshiba controls with different programs generally these buttons are configured to use special programs such as WMP or WInDVD.

  But some people have successfully used these buttons with WinAmp. They have installed an application to 3rd party interface that allows you to use these buttons with WinAmp. Please check this topic maybe it allows:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14884&MessageID=54677

  But you know; It s not a Toshiba application and there is no guarantee that it will be executed.

• Can I use the recorder DVD SD-R6572M with my Satellite A80-117?

  Hello

  Can someone let me know if I can replace the DVD drive on my Satellite A80-117 with a SD-R6572M.

  Basically I'm looking for any information ragarding the compatibility, before buying the disc.

  Pointers are appreciated.

  Kind regards

  Hello

  I found information that these drives are compatible with your device:

  Read-only Drives
  Ext. Slim Line 24 x CD-ROM Drive PX1052E-1NMD
  External DVD - ROM Drive PA3401U-1DVD

  Writable discs
  CD-RW/DVD Rom Drive PA3438U - 1 external CD 2
  External DVD Super Multi Drive PA3402E-1DV2
  External DVD Super Multi Drive PA3454U-1DV2

  Unfortunately, I put t know if the SD-R6572M is compatible with the Satellite A80-11

  Good bye

• Can I use the operator SIM card on my T530 wireless?

  I have a card slot SIM which is supposed to be for WWAN, but I do not have a WWAN modem. Can I use the SIM location in this State for WLAN (HSPA) and others (with Intel Centrino?), or do I have to buy a modem USB to a wireless carrier?

  No, you can't. The slot for SIM card only works when a WWAN compatible card.

• I have a dell latitude d600. I use proset/wireless wifi intell. I want to spend to 87112 wzc. How can I do this?

  I have a dell latitude d600. I use proset/wireless wifi intell. I want to spend to 87112 wzc. How can I do this

  original title: 871122 wzc help
  Hello!
  I made a goof my wireless configuration to try to resolve a bad connection to the local network at home.  This response of Amnah_95 solved problem by following the instructions and a reboot.  Thanks Amnah_95.
  I think you've got the third-party software installed on your laptop to configure the wireless adapter. Third-party software seems to have disabled the Wireless Zero Configuration (WZC) Microsoft service. You will need to reactivate it.

  Follow the steps below to activate the automatic configuration on your laptop.

  1. Click Start, click Run, type % SystemRoot%\system32\services.msc/s, and then click OK.

  2. double-click on Wireless Zero Configuration.

  3. in the startup type list, click Automatic, and then clickApply.

  4. in the Service status area, click Start, and then click OK.

  Software configuration of certain wireless adapters removes the automatic configuration service. If this is the case, you can try this fix by changing the registry value.

  WARNING: Editing the registry can be dangerous, use it at your own risk.

  1. click on start - run and type reg. And then click OK.

  2. browse this registry key: HKEY_LOCAL_MACHINE es\WZCSVC

  3. next, create a DWORD value and name it 'Start' and set it to 2.

  • Proposed as answer byAmnah_95, Tuesday, July 6, 2010 13:32
  • Marked as answer bysupport Cody - engineerMicrosoft SupportModeratorThursday, August 19, 2010 12:41 AM