can I use the mass storage device to speed up windows xp, like ready boost on windows7

Similar Questions

• What resources the mass storage device USB use?

  This device is disabled. (Code 22)

  Click Enable device to enable this device.
  I can not activate a USB mass storage device and reading that a resource conflict may have caused to be disabled, what resources use USB mass storage device?

  Hello

  You can check this link:
  http://support.Microsoft.com/kb/310575f

• Digital West of the mass storage device driver download

  After I joined my hardrive western digital, my computer tried to add material to the system but the system could not add to cause corrupt driver. I talked to a Western Digital technical support and was told to the mass storage device driver MS Wimdow. Where can I get this driver or how can I solve my problem?

  Hello

  1. did you of recent changes to the system before the show?

  2. What is the model of the drive?

  3A this works much earlier?

  4. what happens when you try to connect to the device?

  5. do you get an error message?

  6. have you checked if the device is detected on another system?

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the link below and update the drivers for the external hard drive.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• Can I use the MBP as a monitor to a windows PC?

  Can I use the MBP as a monitor to a windows PC?

  N ° the MBP has no built-in support for this.

• Can I use the Vista key code to activate this Windows 7?

  Original title: Windows 7 and key code

  I have a Dell laptop that I replaced the drive on. Originally Vista and Windows 7. I reloaded Vista but if I load this https://www.microsoft.com/en-us/software-download/windows7

  Can I use the Vista key code to activate this Windows 7?

  No, you need the product key for Windows 7, Windows 7 uses its own unique product key. What you can do is to reload the old hard drive, and then try to recover the product key:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• loss of data on the mass storage device

  I installed a mass storage device (no driver needed} he first read although I couldn't get to some of the programs I had on the hard drive.) now he returned as damaged or unreadable. I restarted to go to properties and I get a {(code 28) I went to the supplier Web site, and he said: no drivers needed.} Is it possible to retrieve the info on hard drive? or should I stand and reformat drive losing all

  Hello

  1. you use any USB device to connect to the device?

  2. What is the brand and model of the computer?

  Error code 28 is due to drivers for this device is not installed on your computer.

  See the following for more information Microsoft article.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Try the following and see if it helps.

  Method 1:
   

  If you use a USB device to connect an external device, and then try connecting to another USB port and check if it helps.

  Method 2:

  Try to update the readers of Device Manager and check if it helps.

  a. Click Start, click right on my computer or computer, and click Properties.
  b. on the left pane, click Device Manager.

  c. the Device Manager. In the Details pane, in the list of devices, look for the device for which you want to install the driver software, and then double-click your device. The device Properties dialog box opens.

  d. in the device Properties dialog box, click the driver , and then click set to update driver. The Update driver software Wizard opens.

  
  Method 3:

  Hardware devices do not work or are not detected in Windows

  Keep us updated on the status of the issue.

• Download images via the digital camera. the message on removable disk E saying its now safe to remove the mass storage device

  Cannot download pictures from my digital camera.  I've been able to do recently.  Happened several times, I tried the computer shows small icon at the bottom right it is now safe to remove the removable storage device E.  I recently changed my virus protection providers.  This could be the problem or is it a problem with my computer?

  Hi FrankieLastname,

  Check that the automatic run settings are correct:

  1. Click on the Start orb
  2. Select Control Panel
  3. Select auto play

  You should see the card reader that you use for the Sandisk under devices. Select the action you want to take in the drop-down list.

• Issue using the usb storage device

  Windows 7 does not recognize one of my usb memory sticks. It makes a noise when I plug

  Issue edited by the moderator to add clarity.* *.

  It makes a noise when I plug

  A USB device that makes a noise is defective. You need to replace it.

• Installer for the multi-CD software using USB mass storage

  IdeaPad S series computer pc laptop with no cd rom devices, programs can be installed using the mass storage device, such as usb flash memory. It works very well for programs that have a single cd size. However, when the size of the program is larger than a single cd, so I don't know how to react to the request "Insert the next CD and click OK". Please let me know how to do.

  Thank you for your advice. However, I still want to know how to do because it's sort of my technical challenge.

• Problem of having to re - blackBerry Smartphones format memory to use Blackberry 8330 as mass storage device

  So I created it for my BB Curve 8330 (Verizon Wireless service) last night.

  • I formatted the 2 GB micro SD card
  • I changed the drive letter to avoid a conflict
  • I have all the latest updates I know from this announcement. (4.5.0.77 on the phone itself)
  • List of media cards: support 'on', 'none', Mode of mass storage card encryption mode 'on', scoped the mass storage mode when connected to 'yes '.

  Everything was fine. Even had a few tunes out there to jam to.

  Not even 24 hours later, I wanted to add more music and photos to personalize the BB more far. So I plug it into the PC but my computer Vista OS won't let me access the memory card. The BB has popped up on the list of drives, but if I click it, it says I need to insert a memory card into the mass storage device.

  I go to the BB Desktop Manager and go to the media. I have almost the same question.

  Even with a pop of the battery, check the memory card using a card reader (card is good) and the reintegration of the memory card, the problem persisted. I had to re - format the memory card on the BB again (to wipe everything), and then when I plugged in the USB cord, I could access the card again in the mass storage device.

  Reformatting was not a big deal since it's not like anything on the card has not been already saved elsewhere. However, I really don't want to have to do that on a regular basis. I understand the technology hiccups every now and then, but if I have to do every time, it's going to be a pain in the rear.

  So all that being said, is there something that I forgot that I need to check or trouble so I don't have to constantly re - format my memory card and re-load all on it? I have tried to do everything that I could think of and I tried searching these forums very, but I had no luck (or did not use the appropriate search string) in the generation of responses.

  A card microSDHC fixed the problem. The old card memory, I got in it was a regular 2GB microSD card. I bought a 4 GB microSDHC card and the problems no longer exist.

  I wanted to get a card greater new anyway, so I'm glad that all worked where I didn't have to do anything unwanted. The old card memory is great; It would be not just works perfectly in my Blackberry. I'll give it to the lovely lady of the House, who can update the 1 GB card in her phone.

• Mass storage device USB cannot start. Why?

  When I attach a USB to my computer, it is detected, but the driver cannot be found. In drivers and the printer it says troubleshooting.

  It reinstalls the device drivers and shows the rest of the dialog box whenever I run the troubleshooter.
  [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close] [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close]
  Now, in the mass storage device properties, it shows the device status as "this device cannot start. (Code 10) »
  "Rental: Port_ #0002.Hub_ #0004" I also put driver, but it is up to date.
  Driver version: 6.1.7601.17577
  Driver date: 21/06/2006

  Hi Jessica,.

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link given below which will help you solve this problem.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• I have a new subscription to creative cloud, which is paid, received a Bill and I have an account. When I launch Illustrator, so I can only use the trial version. A pop-up Adobe says that it cannot find any subscription associated with my Adobe

  I have a new subscription to creative cloud, which is paid, received a Bill and I have an account. When I launch Illustrator, so I can only use the trial version. A pop-up window Adobe says that it cannot find any subscription associated with my identification code Adobe what can I do to change this?

  Hello Hans,.

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• the rest of the device used to "ready boost" can be used as a storage

  the rest of the device used to "ready boost" can be used as a storage

  Hi Sam,

  You cannot use the available space on the Flash DRIVE or flash memory card in your computer that is used for ReadyBoost.

  ReadyBoost to effectively speed up your computer, the flash drive or memory card should have at least 1 gigabyte (GB) of available space. If your drive or the card doesn't have enough available space for ReadyBoost, you'll see a message telling you to free space on this subject. For best results, use a Flash DRIVE or flash memory card with at least double the amount of available space as the amount of memory (live RAM) on your computer.

  For more information about ReadyBoost, see this article:

  ReadyBoost (valid also for Windows 8)

  http://Windows.Microsoft.com/en-in/Windows7/products/features/ReadyBoost

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.