Can I use the mouse wireless with my Satellite M30x?

Hello

I have a question. I have the Satellite M30x and my dealer me Toshiba PA3205U-1ETC optical wireless mouse will sell. In information he said that's the only specific laptop models.
Can I use it with my laptop? At my laptop this specific wireless adapter?

Welcome them
s.Wille
Sorry for my bad English

Why not.
I use a mouse wireless at home. Pout station is connected to the USB port and the mouse communicates with the wireless station.

I put t see any reasons why you shouldn't t be able to use these mice.

Greetings

Tags: Toshiba

Similar Questions

  • Can I use the 2nd HD with RAID 0 in my G15-AV501 QOSMIO?

    Dear,

    I have a QOSMIO G15-AV501. This model does not support HD RAID by the BIOS, but I would use software RAID.
    The question is: can I use the 2nd HD using RAID 0 by re? I will use as RAID 0 in order to promote the overall performance. Is this possible?

    Thank you.

    Dario of Colombia.

    Hello

    I don t think you will be able to use the RAID if the laptop doesn't supports RAID and has no RAID controller.
    Usually for RAID using the RAID controller driver must be installed. This must be done at the beginning of the installation of the OS. Without this driver HARD drive can't be recognized and you will not be able to install the operating system.

    However, as I know the RAID option doesn t accelerates the overall performance.
    The RAID is useful if the first disk goes dead and restore you the data.
    RAID mirroring option saves the data on two hard disks.

  • How can I sync the keyboard wireless with the hub?

    I have a 1 ms wireless keyboard. 0 has and can not find the right button to synchronize with the hub.

    Can you help me?

    JoAnne

    I have a 1 ms wireless keyboard. 0 has and can not find the right button to synchronize with the hub.

    Can you help me?

    JoAnne

    The designation "1. 0a"seems to be a version number, and not a model number.  As a general rule, MS wireless keyboards have the numbers of models such as 1000, 3000, 6000, etc.. See, for example, http://www.microsoft.com/hardware/mouseandkeyboard/ProductList.aspx?type=Keyboard&additionalType=Sets&techId=WirelessTechnology

    I think Microsoft "Documentation" for the products of its keyboard and mouse to be pretty pathetic, so even if you had provided the model number, chances are that the documentation would not help a lot.

    Some of the products of Microsoft wireless keyboard and mouse have sync buttons and some do not.  See http://support.microsoft.com/kb/838398 for some pictures and tips on the sync'ing of these products.

    If your keyboard has a button, it will be small and should be ironed with something like a ball point pen.  See this video: http://www.microsoft.com/showcase/en/us/details/c0b359ba-ead6-4298-aa46-6b943ffb8e2e

  • I can't use the toolbar google with this version and it is really bad, I want to go back to version 4 and I do not think the right to download it

    It's really good for me and easy to work with the gmail toolbar that I can easily manage the drive
    Firefox 5 will not work with it and I want to go back to version 4 I could keep working until they will fix it.
    and I can't find where I can download the 4 and how to change 5.
    Thank you

    The 7.1.20110512W version Google toolbar works in Firefox 5.0 using the add-on Compatibility Reporter, I tried it myself because of the large number of comments on the problems of the GTB.

    https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  • Can I use my Hp7200 wireless with a Samsung Galaxy your leave?

    Naked again for this, pls wit me. Can I use an Android operating system to work with my Hp Printer wireless mind?

    Oops... Galaxy Samsunv Tablet

  • How to use the google toolbar in firefox 5? Can I use the old version with the google toolbar, or should I remove firefox from my computer using IE etc?

    I want to use the google toolbar in firefox 5, but it does not support.

    I love Firefox, but a new version, before it is compatible with the most popular add-ons ad is ridiculous. So is the appearance changes so that everyone must learn to use the software. I'm sorry, but they are starting to think like Microsoft.

  • Can not use the USB ports on my Satellite P10

    I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

    Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
    Any suggestions? I want to add an external mouse drive DVD etc...

    Any help appreciated... Mark

    Hello

    Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
    I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

    The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

    In Device Manager, you may turn off the power save the unique option to the USB ports.
    You can do this in the properties of the USB port

    Additional I advise to use a USB hub with external power clean.
    These devices are not very expensive and will allow you to connect and use several devices together.

  • How to use the external screen with my Satellite M30?

    Hi guys, I have the following problem:

    I have a portable Satellite M30-642 former. My keyboard it is completely broken (spilled something on it) so I use an external USB keyboard.

    Now that I bought a TFT I wanted to use it as a primary device, so I need to take the laptop to the external output.
    The laptop itself recognizes as a secondary screen already, but this isn't what I want.
    Problem is I can't switch from the display without the FN key devices!

    I tried to search the net and this forum - but the solution posted does not work for the M30. There is no option in the utility of HW and not in the BIOS to enable the external keyboard support.
    Please is there any other combination of keys that would work or a software utility that allows me to turn on? It's a really bad situation for me :(

    All solutions anyone? :(

    Greetings and thanks in advance
    HQ

    Hello

    Please don't be crazy on me but I write here very often and somehow try to help, but I'm still irritated if someone thinks that anything is possible. Unfortunately, you have to accept that sometimes there is hardware limitation and there is nothing to do.
    I want to talk about primary and secondary monitor.

    On most laptops, the LCD is always set as primary and cannot be changed. So, as far as I know, without using the FN + F5 key combination you extend the desktop to external display and use both of them. Using display settings you should be able to switch to an external display only (display control panel settings NVIDIA advance settings and so on). Please test only because I don't have M30, but the principle is used the same.

    If you will be able to use external display only try to restart your laptop and see on which screen the office will be shown. If you will be lucky and office will be shown on the external display, try to extend the desktop to second monitor (laptop LCD).

    Good bye

  • How can I use the button "Insert" with RDP (German keyboard)

    Hello

    I would like to know what I have to press to simulate the Windows button "insert" (einfg in German) on my MacBook Pro 15 "mid 2015 (German keyboard) keyboard.

    I use remote desktop to connect to a Windows Terminal Server and have the Insert button in a tool of emulation that I need for my work, but I can't find a way to use this button.

    Can someone help me out here?

    ask on the forums Microsoft DRC since it is their software with which you experience problems.  c https://social.technet.Microsoft.com/forums/windowsserver/en-US/Home?Forum=winRD

  • can I use the old software with windows 8

    I have a version of 1992 of the Borland Paradox which works very well on my laptop Windows XP (home edition version 2002 service pack 3) that I kept (I don't use this software on it now) because my current laptop that has windows 7 Home Edition, can not run this software.  I f I've upgraded to Windows 8 Pro I will be able to load and run this old software?

    WIN8 does not support Windows XP virtual

    http://www.Microsoft.com/Windows/Virtual-PC/support/FAQ.aspx

    Win7 anytime upgrade is £89.99 (Home Premium > Win7 Pro)

    http://www.Amazon.co.UK/Microsoft-Windows-Anytime-Upgrade-professional/DP/B002M78BPU

    Be aware that there is no guarantee that paradox will run properly in this environment

    You can check this out, http://www.vmware.com/products/player/ (NB you need a real winxp, not your drive retail oem Setup disk)

  • Can I use the dual display with a background separately on each screen?

    Using windows 7... I use two monitors, but I can't find anyway to display a background image to display separate on each monitor. I tried in my graphics card settings and configuration-display settings panel.

    Very frustrating! It seems such a simple thing to do!

    Tuesday, September 11, 2012 13:37:20 + 0000, SamQT wrote:

    Using windows 7... I use two monitors, but I can't find anyway to display a background image to display separate on each monitor. I tried in my graphics card settings and configuration-display settings panel.

    Very frustrating! It seems such a simple thing to do!

    Windows 7 has no way to do it. However, you may be able to find a
    third party program that adds the ability to Windows 7.

    Ken Blake, Microsoft MVP

  • can I use the HP Wireless printing Upgrade Kit to a usb splitter to connect two HP printers?

    

    HP Photosmart C5280 - ┐

    Separator │USB ├ - HP Wireless Printing Upgrade Kit - PC

    HP LaserJet P1505n - ┘

    Is it possible?

    Yes, it's possible!

  • How to use the LAN wireless on a Satellite L100-197

    Have this L100-197, has a card wireless in there, but the wireless button is blocked with a sticker. Installed the card very well, but obviously I have no wireless switch, so it can't seem to find available networks.

    What do I do/buy/install?

    [Edited by: admin on June 30, 2007 08:04]

    Hello

    Do you really mean the Satellite L100-197? !!! This laptop is not known to me!
    It seems that the number of 197 extension does not exist but only the 179!

    Satellite L100-179 does not support WLANs and was delivered without any WLan minPCI cards!

    Bad news, you can also not improve with a minPCI wireless network card. If you want to connect the laptop to the WLan, you need to use an external solution such as a WLan USB key for example!

    concerning

  • Can I use the jet with the i pad2 P1102w laser printer?

    Can I use the P1102w printer with my i pad or iPhone?

    Hello

    Your printer is compatible with Airprint with the latest firmware.

    Make sure your iPhone / iPad have iOS version 4.2 and more to support Airprint.

    Upgrade the firmware of the printer to your PC by using the tool below, using the tool for your operating system:

    Windows / Mac OS

    You will then be able to print from the iOS built in function print as long as they are connected to the same network as your printer.

  • I can't use my mouse pointer in windows 64-bit vista Media Center

    My mouse does not work in windows vista media center. I use the tab buttons, arrows, and the rnter buttons to get it to work but not the mouse. Is it possible to get the mouse working? I move the mouse, and if by chance I managed to get the pointer of the mouse under a button he highlites and I can then press the mouse button and it will work, but the mouse pointer is invisible.
    Is it possible to put the mouse in sight?
    Thank you for your help
    Whenever I use (64-bit) windows vista Media Center after it starts I can't use the mouse to move from one element to the element. I need to use the tab key, arrows and enter to do anything in media center. Is it possible to get to be able to use my mouse?

    Among other things, this suggests to disable 'Traces of the mouse', if you have it on might work.

    Tutorial Vista - the mouse cursor disappears in Media Center
    http://www.Vistax64.com/Vista-General/34749-mouse-cursor-disappears-Media-Center.html

    When Media Center is open, the mouse disappears in Vista Ultimate (RTM)
    http://forums.techarena.in/Vista-music-video/678304.htm

Maybe you are looking for