Can iPhone auto-install latest iOS?

Hello, I'm a dinosaur and I have the iPhone 4S with 6.1.3

In I downloaded iOS 8.4.1 but not already installed

My iPhone when I sleep auto can install iOS 8.4.1 in itself or not?

If so, how can I prevent it?

Thank you

Advertisement

If your device tries to install automatic, based on the device being connected to wi - fi and it would be to install the latest version of iOS, 9.3.1. It would not be able to install 8.4.1, because it is more will be signed for the iPhone 4S.

Tags: iPhone

Similar Questions

  • iPhone 6 more issues activation and network on the latest iOS 9.3.2

    I have an iPhone 6 it is having problems with Activation and networking connectivity. I activated via iTunes and updated to the latest iOS 9.3.2 this morning. The phone remain active for a period of time and then come back to need activation.

    Using WiFi it is full bars but no connection. I'm typing this from my iPad on the same WiFi connection, so not the network. If I turn off WiFi and cell there still no connection. The phone will receive calls (even when stuck in the activation state) and can make calls after you have enabled from iTunes.  She was released a couple of times, but always the same question.

    I tried to erase and reload from iTunes to the top, but the restore function requires that find my iPhone service shut down on the phone and this step requires access to complete network.

    Try the following steps:

    • Try connecting your device to your computer and launch iTunes. Choose your device and click on summary > update.
    • If this does not work, make sure you have the latest version of iTunes installed on your computer and restart your computer.
    • When it restarts load iTunes and try to select your device and click on summary > update again.
    • If this does not work, it's time to try a restore. Press and hold the sleep/wake and home buttons on your iPad or your iPhone until iTunes gives you the option to restore your device.
    • When it's over, you can restore a backup, and you should be good to go with 9.3 running iOS.
  • An iPhone 4S should upgrade to the latest iOS version 9?

    Hello

    One of my friends still has his iPhone 4S with iOS 8.3. She is fairly clean sound with very few applications. She mainly uses the app facebook facebook messenger and whatsapp. Lately she has experienced some app crashes. Especially with facebook and facebook messenger, sometimes she's their use and the apps just close. The phone returns to the home page.

    Is there something that can be done to solve this problem? Has anyone tried the latest iOS update? Does that help? The 4 handles well the latest OS?

    I apologize in advance if this has already been answered elsewhere. I tried looking for the answer and I couldn't find one.

    Thanks for any help anyone could provide.

    Best regards

    Yes you can, I have an iphone 4 with ios 9.3.5 s

    I hope that resolves your issue.

  • How can I get my ipad to the latest iOS uptate

    How can I update my iPad to the latest iOS

    Follow the instructions in this document support. Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  • iPhone App stuck on 'Install' on iOS 9.0.1 (DPS 2015)

    I had to update my iPhone to the latest version of iOS (9.0.1) to launch the 2015 DPS demo app that we're working on. The app is stuck saying "Facility" under the icon on my home screen. I have not tested how it works on an iPad update yet.

    Post edited by: Alex Khanukov (adding details DPS 2015)

    See cannot install a developer .ipa file

    Neil

  • I use 5s iPhone and upgrade to iOS 9.3.1 but he can't get all the features...

    I use 5s iPhone and upgrade to iOS 9.3.1 but he can't get all the features...

    What features Miss do you?

  • My wife made me an iPhone 5, but it doesn't have a sim. How can I find out what IOS is on the phone and sellers it work on?

    My wife made me an iPhone 5, but it doesn't have a sim. How can I find out what IOS is on the phone and sellers it work on?

    On the back it is marked A1429.

    Other Sim cards by train until one works, you will need to go to an Apple Retail Store or contact Apple Support and make them check the lock for you state.

    http://www.Apple.com/contact/

    For the iOS version, he will find in the Middle-> General-> about-> Version once the iPhone is fully active.

  • I upgraded my iPhone and iPad to IOS 9.2. Now my Seagate Wireless Plus can't access my photos on my iPad or iPhone. Someone at - it an answer to this?

    I upgraded my iPhone and iPad to IOS 9.2. Now my Seagate Wireless Plus can't access my photos on my iPad or iPhone. Someone at - it an answer to this? I contacted Seagate and after a session of 2 hours troubleshooting I was told that my Seagate Wireless search CAMERAROLL. Now the photos does not use the term... He uses all of them. So Seagate Media cannot access the photos to download.

    Have you tried to create a folder with the same name and put some pictures in there and see if it works now?

    R

  • Updates auto-installed, now my application of fresh paint guard before closing I can finish

    Application of wet paint came with my Microsoft. HE loved! .. up to - this 2 days ago. That's when he went crazy. Before I can finish any paint, the dots start circling around and around, and then it crashes and I have to delete what I painted & start all over again. Tried to uninstall & reinstall, deleted a lot of my work, thinking maybe it was full... Nothing works... Help!

    Original title: My fresh paint App went CRAZY!  2 days ago several updates auto-installed, now my application of fresh paint guard before closing I can finish. (the dots just keep in a circle) Help

    Hello

    Follow the steps listed here, then try again fresh paint

    http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-system/troubleshooting-component-store-system-files/8acbd614-678d-42B9-859c-56d3e6f8342a

  • CC installed. In the Application the App al Manager appear as "not installed", and so I can't have the latest updates.

    I just updated my OS X to El Capitan. Creative cloud works, but in my Application Manager al the App appear as "not installed", and so I can't have the latest updates. How can I solve the problem?

    Hi Emmanuel,.

    Please see the article: Panel Apps shows not installed Adobe Creative Cloud applications

    See also the discussion below:

    Pre-installed applications not shown as it is installed

    Creative applications Cloud Desktop application

    Let us know if it helps.

    Kind regards

    Shelly

  • Install the updates for installation of Creative Cloud Packager, Mac education.  Package of CCP update returns an error.  CCP does not load.  Where can I download the latest CCP?

    Hey all:

    Created and deployed a CC 2014 package to our iMac Apple OS 10.9.5

    The package is now obsolete and workstations cannot install updates.

    I tried to create a package update with Adobe Creative packer of cloud, but the update package is not installed.

    I try to create a new package of Creative Cloud 2014 with all updates but does not load CCP.

    CCP returns the error "Oops, something has gone wrong, please try again."

    CCP downloaded from my LWS gives me the same error.

    Where can I download the latest version of the CCP?

    I have install Adobe Creative Cloud 2014 via the package can configure us the desktop computer to update from the internet?

    If so, how?

    Thank you.

    WIN

    http://www.Adobe.com/go/ccp_installer_win

    MAC

    http://www.Adobe.com/go/ccp_installer_osx

    It is likely that the ports are closed that the CCP needs to talk to our servers.

    Please refer to this page8s). You will find information about the deployment and packaging of CC:

    Creative Cloud for businesses

  • My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    Hello brooksm549,
    Thank you for using communities of Apple Support.

    I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

    On the use of the battery on your iPhone, iPad and iPod touch

    When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

    Maximize the life of the battery and battery life

    Best regards.

  • Safari is very slow after downloading the latest IOS on my MacBook Pro

    Safari is extremely slow after downloading the latest IOS on my MacBook Pro. Can we do anything?

    It was very fast.

    IOS is not running on a MacBook Pro. Do you mean that you went to El Capitan?

    When Safari is running slowly? When? What sites? Force Quit Safari and then start it again while holding down the SHIFT key. If Safari works as expected, then remove your installed Safari extensions. Restart Safari normally and add your extensions one by one until the slow back. You have now identified the extension at the root of the problem.

  • malfunction of the "home" iPhone button 5 after iOS 9.2.1 update

    I was wondering if someone can help me.  I updated my iPhone 5 today and after updating my home button wasn't working properly.  I am able to hold down the home button and Siri responds, I can double click on the home button and the iPhone will list all my applications open, but when I open app and single click to minimize the application, the home button does not.  It worked before I upgraded to iOS 9.2.1.  After the update, I've also restored my iPhone to the latest backup.

    Hi okbug1,

    Thank you for your question. Have you tried to restore your phone?

    Here's what you need to do.

    • Connect your iPhone to your computer and back up all the content on your iPhone.
    • Restoring iPhone. (You will find the button restore in iTunes homepage once you connect iPhone in)
    • Follow the steps on your computer screen.
    • Once the iPhone was restored, sign in using your credentials to iCloud and click on restore from a backup.

    I hope this helps!

    Axel Tempest

  • Auto-install HPLIP: it works?

    I just bought a HP printer. Then I was installing HPLIP for 2.5 days. more than expected. (Needless to say that I curse me HP the last day). Now, I am pleased to succeed, but I also think it was a good chance. I think that this story deserves to be shared.

    I'm a Linux user since 1998, geekness rather low. I almost always use a binary pre-compiled. So I hoped to use auto install (and ultimately done). In recent years, I use Debian.

    It seems that I now understand the origin of the problem. People to take hplipopensource.com the current Debian release (among other distributions) and adjust auto-installer for this version. After that, the Debian people include this new version of the automatic installer for the next version of Debian. And so on. As a result, the auto-installer never works! He always complains that this version is not yet supported.

    I installed Debian 7.1 my (slightly old) DVD. I loaded the Installer do not use any mirror network. Don't laugh, this is essential. (When I did otherwise I got 7.4 Debian instead of 7.1 - not yet supported...) According to this version of Debian, the Installation Wizard gave me the auto-installer ' hplip - 3.14.1.run'. Running it, I received a message: 'disable CD sources in your apt sources list. Frankly, I use Synaptic instead of apt. Well, I found this /etc/apt/sources.list and commented all sources CD. Hplip again, that I have because it fails to install gcc even running. Well, no wonder: no mirror network. I've added a mirror network. The rest was pretty easy.

    So, I got the impression that a user of Linux non-so-geek, like me, have some probability of positive, but small enough to pass through all delays before selling its new HP printer. Indeed, if Linux is quite new, it is not yet supported. If it's a little more than necessary, a new hplip fails for this reason, while old hplip does not support the new printer (I think so; I have not tried). And especially: hplip site tells me that

    Debian 7.1 HPLIP 3.12.6 office supplies and it is supported by your printer.
    As the version of HPLIP, supplied with your operating system supports your printer, you can continue to use this version of HPLIP.

    It is true; but he forgets to add that my distro contains a version out of date; It simply doesn't get it. What a catch!

    Maybe I'm naïve somehow? Others seem to feel better. What Miss me?

    Wow, it works, HPLIP auto install!
    See my session below.

    The five following points seem to be critical for me.

    1. the site of hplip says:
    '7.1 debian provides HPLIP 3.12.6 and it is supported by your printer. As the version of HPLIP, supplied with your operating system supports your printer, you can continue to use this version of HPLIP." No, don't think. Download the latest version (in my case, hplip - 3.14.1.run), later called "XXX.run".

    2. ensure that your repositories contain no CD/DVD (the auto-installer will warn you), but "main" and "contrib" (the No auto-installer will warn you). It is not necessary to "non-free". I did it through the (settings-> repositories) Synaptic Package Manager.

    3. run the XXX.run file with a command line "sh XXX.run" issued in the terminal under the MISTLETOE (not the console). Do not be root and not to use 'sudo '. Instead, you must know the root password.

    4. you will get an error like this: "error: debian-7 version, 4 is not supported, so all dependencies cannot be installed." "However trying to install using debian package - version 7.2.
    Don't worry too much; in my case it was harmless. Answer "y".

    5. the final error message "RuntimeWarning: PyOS_InputHook isn't available for interactive use of PyGTK set_interactive (1)" is also harmless.

    After the message
    "SETTING UP THE PRINTER. Please make sure that your printer is connected and powered at the moment. "
    You should get a graphic Panel
    "HP - Setup Manager. Device discovery.
    Do the necessary of the choice (in my case, USB), click "next". You should get another graphic Panel
    "HP Device Manager - install plug-ins." Installation of the plug-in Driver. "
    Choose 'Download', click 'Next' and to be patient. in my case, it took 5 minutes, but no visible progress. Following graphic Panel:
    "Pilot plug-in license agreement. Browse through, click "I agree." see the "Installing a plugin successfully" message, click 'OK '.
    The last graphic Panel: "HP - Setup Manager. Device Setup. Mark 'Send test page', click on "Add a printer" and hope for the best.

    [email protected]:~$ sh hplip-3.14.1.run
    Creating directory hplip-3.14.1
    Verifying archive integrity... All good.
    Uncompressing HPLIP 3.14.1 Self Extracting Archive...................................................................................................
    
    HP Linux Imaging and Printing System (ver. 3.14.1)
    HPLIP Installer ver. 5.1
    
    Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    
    Installer log saved in: hplip-install_Thu-27-Feb-2014_19:04:37.log
    
    \
    note: Defaults for each question are maked with a '*'. Press  to accept the default.
    error: debian-7.4 version is not supported, so all dependencies may not be installed. However trying to install using debian-7.2 version packages.
    
    Press 'y' to continue auto installation. Press 'n' to quit auto instalation(y=yes, n=no*): y
    
    INSTALLATION MODE
    -----------------
    Automatic mode will install the full HPLIP solution with the most common options.
    Custom mode allows you to choose installation options to fit specific requirements.
    
    Please choose the installation mode (a=automatic*, c=custom, q=quit) :
    
    Initializing. Please wait...
    
    INTRODUCTION
    ------------
    This installer will install HPLIP version 3.14.1 on your computer.
    Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).
    
    DISTRO/OS CONFIRMATION
    ----------------------
    Distro appears to be Debian 7.4.
    
    Is "Debian 7.4" your correct distro/OS and version (y=yes*, n=no, q=quit) ?
    
    ENTER ROOT/SUPERUSER PASSWORD
    -----------------------------
    Please enter the root/superuser password:
    
    INSTALLATION NOTES
    ------------------
    NOTE: Disable the CD Sources in your apt sources.list or the install will fail and hang.
    
    Please read the installation notes. Press  to continue or 'q' to quit:
    
    RUNNING PRE-INSTALL COMMANDS
    ----------------------------
    OK
    
    INSTALL MISSING REQUIRED DEPENDENCIES
    -------------------------------------
    warning: There are 9 missing REQUIRED dependencies.
    note: Installation of dependencies requires an active internet connection.
    warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
    warning: Missing REQUIRED dependency: libpthread (libpthread - POSIX threads library)
    warning: Missing REQUIRED dependency: make (make - GNU make utility to maintain groups of programs)
    warning: Missing REQUIRED dependency: python-devel (Python devel - Python development files)
    warning: Missing REQUIRED dependency: cups-devel (CUPS devel- Common Unix Printing System development files)
    warning: Missing REQUIRED dependency: libusb (libusb - USB library)
    warning: Missing REQUIRED dependency: libtool (libtool - Library building support services)
    warning: Missing REQUIRED dependency: cups-image (CUPS image - CUPS image development files)
    warning: Missing REQUIRED dependency: libjpeg (libjpeg - JPEG library)
    
    INSTALL MISSING OPTIONAL DEPENDENCIES
    -------------------------------------
    warning: There are 8 missing OPTIONAL dependencies.
    note: Installation of dependencies requires an active internet connection.
    warning: Missing REQUIRED dependency for option 'network': libcrypto (libcrypto - OpenSSL cryptographic library)
    warning: Missing REQUIRED dependency for option 'network': libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)
    warning: Missing OPTIONAL dependency for option 'network': avahi-utils (avahi-utils)
    warning: Missing REQUIRED dependency for option 'gui_qt4': pyqt4-dbus (PyQt 4 DBus - DBus Support for PyQt4)
    warning: Missing REQUIRED dependency for option 'gui_qt4': pyqt4 (PyQt 4- Qt interface for Python (for Qt version 4.x))
    warning: Missing REQUIRED dependency for option 'fax': dbus (DBus - Message bus system)
    warning: Missing REQUIRED dependency for option 'scan': sane-devel (SANE - Scanning library development files)
    warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)
    
    CHECKING FOR NETWORK CONNECTION
    -------------------------------
    Network connection present.
    
    RUNNING PRE-PACKAGE COMMANDS
    ----------------------------
    su -c "dpkg --configure -a" (Pre-depend step 1)
    su -c "apt-get install -f" (Pre-depend step 2)
    su -c "apt-get update" (Pre-depend step 3)
    warning: An error occurred running 'su -c "apt-get install --yes cupsys-bsd"'
    su -c "apt-get install --yes cupsys-bsd" (Pre-depend step 4)
    OK
    
    DEPENDENCY AND CONFLICT RESOLUTION
    ----------------------------------
    Running 'su -c "apt-get install --force-yes -y g++"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libc6"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y make"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y python-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libcups2-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y cups-bsd"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y cups-client"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libusb-1.0.0-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libtool"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libcupsimage2"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libcupsimage2-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libjpeg8-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libssl-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libsnmp-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y avahi-utils"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y python-qt4-dbus"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y python-qt4"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libdbus-1-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y libsane-dev"'
    Please wait, this may take several minutes...
    Running 'su -c "apt-get install --force-yes -y xsane"'
    Please wait, this may take several minutes...
    HPLIP-3.12.6 exists, this may conflict with the new one being installed.
    Do you want to ('i'= Remove and Install*, 'o'= Overwrite, 'q'= Quit)?    :
    Starting uninstallation...
    HPLIP uninstallation is completed
    
    RUNNING POST-PACKAGE COMMANDS
    -----------------------------
    OK
    
    RE-CHECKING DEPENDENCIES
    ------------------------
    
    PRE-BUILD COMMANDS
    ------------------
    OK
    
    BUILD AND INSTALL
    -----------------
    Running './configure --with-hpppddir=/usr/share/ppd/HP --prefix=/usr --enable-qt4 --disable-libusb01_build --enable-doc-build --disable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-udev_sysfs_rules --disable-policykit --enable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build'
    Please wait, this may take several minutes...
    Command completed successfully.
    
    Running 'make clean'
    Please wait, this may take several minutes...
    Command completed successfully.
    
    Running 'make'
    Please wait, this may take several minutes...
    Command completed successfully.
    
    Running 'su -c "make install"'
    Please wait, this may take several minutes...
    Command completed successfully.
    
    Build complete.
    
    POST-BUILD COMMANDS
    -------------------
    
    CLOSE HP_SYSTRAY
    ----------------
    Sending close message to hp-systray (if it is currently running)...
    
    HPLIP UPDATE NOTIFICATION
    -------------------------
    Do you want to check for HPLIP updates?. (y=yes*, n=no) :
    
    RESTART OR RE-PLUG IS REQUIRED
    ------------------------------
    If you are installing a USB connected printer, and the printer was plugged in
    when you started this installer, you will need to either restart your PC or
    unplug and re-plug in your printer (USB cable only). If you choose to restart,
    run this command after restarting: hp-setup (Note: If you are using a parallel
    connection, you will have to restart your PC. If you are using network/wireless,
    you can ignore and continue).                                                   
    
    Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
    Please unplug and re-plugin your printer now.  Press  to continue or 'q' to quit:
    
    PRINTER SETUP
    -------------
    Please make sure your printer is connected and powered on at this time.
    
    RE-STARTING HP_SYSTRAY
    ----------------------
    
    HP Linux Imaging and Printing System (ver. 3.14.1)
    System Tray Status Service ver. 2.0
    
    Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
    This software comes with ABSOLUTELY NO WARRANTY.
    This is free software, and you are welcome to distribute it
    under certain conditions. See COPYING file for more details.
    
    /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:127: RuntimeWarning: PyOS_InputHook is not available for interactive use of PyGTK
      set_interactive(1)
    [email protected]:~$
    

Maybe you are looking for

  • Replaced the HDD, need new Windows 7 genuine

    Hey,.My HD failed, and I needed to replace it.I don't have DVD repair or any support to install Windows. I tried to download from Microsoft, but they are sending me to Toshiba.Any way I can download a good Windows 7 for my laptop? THX,JO

  • How to synchronize changes in the iMac to an external flash drive

    Without using a 3rd party application, is it possible to synchronize changes made to my iMac documents and data on an external drive such as a flash drive? I use Time Machine, but I want to connect via a usb cable flash drive in the iMac, such as cha

  • Satellite L300 - 14G - Microphone volume of very poor quality

    Hello I have a satellite L300 - 14G. I would use a microphone.When I connect it to the front, the quality is very bad. If I pushed it there is a lot of background noise.If I don't push it I have to talk REALLY loud to make myself heard.

  • Table of references to the different types of performance issue

    Hi all See the attached code. I use a reminder VI and must pass a few references via the user's settings. I use a table. This is to avoid the constraint (should I care?), I type cast to more of a generic class, then in the callback function, go to a

  • menu bar popup not working if the focus is on the control of the chain

    Dear all, I wonder if this is the behavior expected or if I'm doing something wrong: On a Panel, I have a control of the chain; on double click, I opened a file selection box to select a file, then the file name on this control of the chain. After th


HashFlare