Can migrate a virtual computer to another virtual hosted by the same host computer?

Similar Questions

• A virtual machine at the same time...? Which means that for Vmware replication

  Hi guys

  I read the Vmware 5.5 replication, and it says what I do not understand.

  I was reading the recovery process and he said:

  You can recover a virtual machine at the same time on the site replicated on the incoming replication tab

  what it means?

  I restore a VM and I have to wait until he said recovered to start the recovery process or simply means that a single virtual computer at a time and no group of the virtual machine can be recovered I can begin the process of recovery in 3 VMs at the same time, but I have to go one

  Thanks a lot guys

  Hello

  The second. You can begin the process of recovery for each virtual computer and they can go in parallel. However, there is no option to select more than one replication and begin the process of recovery in a single step.

  Kind regards

  Martin

• Can I have VMWare Player and Virtual Box to the same PC?

  Can I have VMWare Player and Virtual Box to the same PC?

  Can perform the same two times?

  Hello

  Yes, that's correct.

  --

  Wil

• I had the opportunity to see all the drives in windows 7 and XP virtual machine on the same screen. He suddenly disappeared, and I need.

  As I set up my computer with Windows 7 Professional and XP virtual machine, I could see all the readers, W7 and the virtual machine on the same screen. I can't do now for some reason any. All I can understand what is is past is that I got a page long list of automatic updates of W7 and some XP updates and as far as I know, the current page of readers has disappeared since then.  I need this feature if I can transfer files between W7 and XP because some of my programs are in one program of windows. I have nothing special when I installed XP to achieve this functionality, so I really don't understand what it controls.  How can I get that back?

  I have solved my problem by trying everything that moves. Here are my steps:
  -Open Virtual PC and minimize it
  -In the Windows 7 machine, click Start click all programs
  -Select Windows Virtual PC
  -Select Windows Virtual PC (in the drop-down list)
  -When the window opens, right-click on Windows XP Mode
  -Select share >
  -Select the homegroup (read/write)

  -Minimized open Virtual PC
  -Select my computer
  Windows 7 disks will be under other

  I hope this works for you also. As I said, it worked like this until I had a huge list of automatic updates of Windows 7 and XP more some updates. Apparently, one of them cut something.

  Even a blind squirrel finds an Acorn once in a while!

• Oracle XE on multiple virtual machines on the same physical machine?

  Hi people,
  
  Can I install Oracle XE on several virtual machines that are on the same physical machine?
  
  Thank you
  
  G. grangier

  I find that this interpretation is questionable.
  Instance, what do mean?
  What they mean by server?
  Unless Oracle explicitly forbids the execution of several databases of XE on different virtual machines at the same time, I don't see violations.

  For example, imagine that the user has runs that XE on AWS and user B running an another XE on AWS.
  They are not running on the same "Server"?

  Flavio
  ----

  http://oraclequirks.blogspot.com

• Let me know scenarios when different virtual machines with the same UUID are created in VMware Hypervisors?

  Let me know scenarios when different virtual machines with the same UUID created in VMware Hypervisors, aside from editing the .vmx file?

  The only other way I've seen is when you manually copy the virtual machine to another location on the data store (or another data store) and then when turn on/off the virtual machine, select I moved, rather that I copied it (the default option).  This will keep the same UUID.

• Activation of Windows still necessary even if the virtual server on the same hardware to restore

  Hello, I hope someone can answer this.

  Our virtual machine running vmware server ESX 3i 3.5.0 has 2 hard drives, datastore1 and datastore2.   All of our virtual servers are stored in datastore2.   Our hard disk with the datastore2 crashed and he had to be replaced.    We have backups of our virtual servers in datastore2 virtual appliance.

  To solve the problem, we replaced the hard drive crashed and then restored by using the virtual appliance backups, once restored, we noticed that the Windows 2008 requires that the activation of the licenses.

  My question is why does windows need activation when we restored the virtual server for the same hardware? The only thing that has changed is the hard drive.

  Thanks for any help on this issue.

  Export/import unfortunately OVFs does not have an option (at least I'm not aware) to maintain these settings. What you can do - when exporting the virtual machine as an OVF - also download the machine virtual . VMX and .vmxf files. After re - import the OVF, remove it the ESXi host inventory, download the two * .vmx files and add the virtual machine to inventory. -Once asked if you copied or moved the VM on the first power-select "I moved it.

  André

• Tagged management VLAN and the virtual machines on the same VLAN

  I'm faced with a problem related to our Brocade switches newly acquired and get the private VLAN to work on trunk connections to our ESX servers.  Every time I try something different, he creates a new problem.

  In our configuration, our management of VLAN is not tag and we have a VLAN for this management network that is placed on our switches VLAN no marked native.  We also have virtual machines hosted on those same ESX servers that are on the same VLAN and everything works fine.  However, when I change the ESX management to carry a label on this VLAN and change the switchports accordingly (IE no untagged VLAN native), management work, but hosted on the ESX Server machines that are on the same VLAN can get no network connectivity.

  Is it possible to have a management network labeled and also the host of virtual machines on the same VLAN or is it totally impossible?  I'm not very familiar with networking behind ESX, so I apologize if this is a dumb question with an obvious answer.

  Thank you

  Mark J.

  Is it possible to have a management network labeled and also the host of virtual machines on the same VLAN or is it totally impossible?

  Yes, it is possible... why it doesn't work for you I don't know, but try the following:

  1. set up the Group of ports of VMS to use VLAN;

  2 configure the interface of management VMkernel port group use VLAN;

  3 configure the physical switch port to allow to this VLAN and put the default VLAN natively for these interfaces.

• PowerCLI to deploy virtual machines at the same time

  Can I deploy multiple VMs usng PowerCLI, but they spread out in the order and with an error.  It seems almost easier to deploy them manually so that they are created at the same time and not one after the other.  I also want the static IP but don't know how.

  For now, I use a card file customization that indicates static IP and guest for this.  But he never does, he deploys the vms system then throws an error stating VC ' a specified parameter was not correct.  nicsettings: adatpter:ip. "I want to increment IP addresses on virtual computers deploy.

  This is my Basic .ps1 file content

  New-vm - vmhost vm04a.domain.com - name w2k8sp2s64qa14-vm-model Template_w2k8sp2s64qa - Datastore vm04a_storage OSCustomizationspec - w2k8sp2s64

  Can someone help me?

  1 assign static IP addresses

  2 deploy all virtual machines at the same time

  ...

  The parameter - RunAsync right on the New - VM cmdlet.

  She will continue with the line after the New - VM without delay that the cmdlet New - VM to finish.

• I want to install Adobe 10 on a computer. I can only buy Adobe DC. Can I buy DC and decommissioning a permit to install the same version as my other users. If so who should I contact?

  I want to install Adobe 10 on a computer. I can only buy Adobe DC. Can I buy DC and decommissioning a permit to install the same version as my other users. If so who should I contact?

  I contacted Adobe support. I can only downgrade 1 version back. for example DC back to XI. cannot go back to V10. Third party software does not yet support DC. They argue that the worm 8 and 9. But my test shows 10 worm works as well

• network stream between 2 virtual machines in the same vlan and host using DVS

  Hi experts, so 2 virtual machines on the same vlan / subnet and on the same esxi host using VDS need to talk to each other, that they get switched by the VDS internally or they headed north for network switches and come back?

  Welcome to the community - it will stay internal to the ESXi host.

• How can I make an external (to another folder) link in the main menu?

  How can I make an external (to another folder) link in the main menu?

  Please see the discussion here Re: links to external websites Menu buttons>.

• Open another SWF file in the same window of the browser?

  I designed a website, the first HTML page. How to code a button to load another SWF file in the same web browser window?

  The example site uses Flash.  If you want it works exactly the same as you do not want to use the Flash.

  If you want similar functionality, then you can simply use the navigateToURL() function to open the new page with the swf site integrated into it.

  Explaining the AS3 button Code
  --------------------------

  Assume that you create a button symbol.  Since this is a button, it is already a car animation object that will react to mouse interactions, but only visually at this stage.  The first thing you need to do to make it useful down must assign a unique instance name.  If you drag a copy of it on the stage of the library, and while it is still selected, enter you this unique instance for her name in the Panel properties... say you name "btn1.

  In AS3, to make a button with the code, you must add a listener of events and event handler for it function.  You may need to add a little (for different events, like reversal, deployment, by clicking on it, but for now let's just say you want to be able to click them to get a web page.)  In the scenario that contains this button, a layer of separate actions that you create in a similar framework where this button exists, numbered, you must add the event listener:

  Btn1.addEventListener (MouseEvent.CLICK, btn1Click);

  The name of the unique function for the treatment, the click of this button is specified at the end of the assignment of event listener, so now you just have to write this function:

  function btn1Click(evt:MouseEvent):void {}

  var url: String = "http://www.awebsite.com/awebpage.html";

  var req:URLRequest = new URLRequest (url, "_self");   "_self" indicates that it takes to open in the same window

  navigateToURL (req);

  }

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?

  Original title: Windows Movie Maker

  In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?

  Hi Ashley44,

  You can use the trim function in Windows Movie Maker to change the duration of the film. See the link below for the steps

  To trim a video clip

  If you want more advanced features, you can use Windows Live Movie Maker

  http://explore.live.com/Windows-Live-Movie-Maker-stunning-in-seconds?OS=other

• Navigate to another HTML page in the same section file

  Hi all

  It is possible to navigate to another HTML page in the same file of the article? E.g. index.html contains an < a > tag has a href pointing to page2.html? This seems to work in the application of preflight in the iOS, but not in Windows. Currently I use relative links, for example

  < a href = "page2.html" > Page 2 < /a >

  Should I use a different syntax? For example

  < a href = "navto://page2.html" > Page 2 < /a >

  Thank you

  Frank

  I found the solution. Use rather JS. Windows.Location.href seems to work for ios and windows.