Can NB100 - I install 4 GB of RAM?

Similar Questions

• Can I install 4 GB of RAM in my Satellite A100-033?

  I have a Satellite A100-033 (PSAANE-03J02GEN). The manual says that it will support only 2 GB of RAM. Does anyone know if it will support actually 4GB? I installed 2 x 1 GB instead of the supplied 2x512MB and am trying to install 2 x 1 GB? It will work, or is there a restriction in the motherboard or BIOS which means that most RAM is recognized? Can anyone help?

  Hello

  If the manual says you can improve it only 2 GB of RAM, you can then use only 2 x 1 GB modules.
  But if you insert 2 x 2 GB RAM modules then either your laptop does not start or it might start but all of the 4 GB would not be recognized.

  Generally, there are Windows 32 bit OS (no matter if it s Vista or XP) would use and recognize only same 3.2 GB 4 GB RAM max would be inserted.

  And of course, there are a lot of restrictions on the RAM;
  If the chipset and BIOS does not allow 4 GB of RAM, so you wouldn't be able to use it.

  See you soon

• I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  This was after the 3 beep error and I couldn't restart the Mac with one of the 2 GB of Ram into the lower slot.

  Is there a way to test if the top housing is faulty or just dirty?

  Thank you

  svchild wrote:

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  Yes, the MBP will work with a single module of RAM installed, but there will be a slight performance decrease.  A MBP 2012 will accept a module of 8 GB RAM.

  Is there a way to test if the top housing is faulty or just dirty?

  Install each RAM module individually in each slot, leaving the other empty.  If the two RAM modules work in a slot and not the other, the slot is faulty.  Sometimes the adjustment screw can resuscitate the slot.  If this is not the case, make an appointment at an Apple store for a FREE evaluation.

  Ciao.

• Satellite L300-145 - BSOD appears if I installed 4 GB of RAM

  Hi all

  I have this Satellite L300-145 PSLB0E-03601LPT and I want to install 4 GB of RAM, but when I install 4GB on boot THEN BSOD appears.

  I try to change with the other memorys brand with equal modules, I'm trying to install Windows 7 64 bit, Linux 9.10 64 bit and it the same things. I try too update the BIOS but it the same thing.

  I think it's remapping feature memory on bios but does not have this option.
  So what I have to do?

  My laptop has now 3GB
  CPU: T2390 1, 533 Mhz 86Ghz
  CHIPSET: GM965
  RAM: 2 GB DDR2 at 533 Mhz
  HDD:Hitachi 200 GB

  After upgrade
  CPU: T8300 2.4 GHz, 800 Mhz
  RAM: 2 GB DDR2 667 Mhz
  HARD drive: Seagate 7200.4 250GB

  I really need 4 GB

  Hi mate,

  I m really confused now. As a first step, you wrote that you get BSOD if you upgrade to 4 GB, but the specifications after the upgrade are really different. You have a new CPU, RAM and HARD disk with another specification.

  Anyway, at first I checked the specs on the Toshiba website for your laptop and this model can only be upgraded to 2 GB; not 4 GB!
  This means that you can only use two modules of 1 GB in this notebook.

  Sorry, but you will not be able to use 4 GB in this model of laptop.

• HP 1000-1312tu had installed 6 GB of ram, but it shows only 929 usable

  my laptop running windows 7 ultimate x 32 .intel (r) Pentium (r) @2. 40 GHz I have 6 GB of ram installed and usable only 929. I already tried many things and I can't do bugs... Please help me

  Hi @minxfiles ,

  Welcome to the HP Forums!

  This is a good place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have 6 GB of ram and it is only readable 929 reading.

  Just to be sure you're correct DDR3 ram installation?

  Installing the chips of RAM, they must be of the type suitable and properly matched.  You can have 2 @2 for 4 GB of ram or 2@4 GB to 8 GB of ram. To have 6 GB of ram, you would need 1@6 GB to 6 GB of ram.

  If you have added a 4 GB of ram with the original 2 is it came with, it is very likely what is causing the problem.

  Good luck!

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• try to install 4 GB of ram. Get the error «the file header checksum does not checksum» calculated

  Microsoft online tech help recommended I install 4 GB of RAM on my Dell Vista Home computer. The first stick fine boots.

  When I add the second stick the computer poster "the file may be damaged. The file header checksum does not match to the

  checksum calculated. "I see that it is a common error message online search, but nothing specifically addresses

  the issue of the Ram. Any help out there? Thank you.

  Hello

  You can contact the manufacturer of your computer for support and check if it helps.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&CS=19&l=en&s=DHS& ~ CK = anavml

• To install the Sierra but message "this version can not be installed.

  I El Capitan on my Mac.  Tried to install Sierra and received the message that this version can not be installed on my computer.  I think I have enough memory and storage, and when I asked for "More" it shows nothing.

  

• How can I re - install firefox without losing my data. It is infested bame ad.

  Firefox is infested with "ads name.

  How can I get rid of it or how can I
  Re-install firefox without losing any data?

  There is a rash that goes around, and the solution is not yet clear 100%. I suggest try reinstalling this way:

  Clean reinstall it

  We use this name, but it is not about the deletion of your settings, it comes to ensure that program files are-own and contain no alien code files. As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 37.0.1 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• OS x can not be installed on your computer

  I downloaded the OSX El Capitan update for my Macbook Pro (5.3)

  Started the installation, install the system has restarted in osx mode, I had to choose a drive and installation.

  After several minutes, I got this error (translated from Dutch, so it may not be the exact error and English):

  OS x can not be installed on your computer

  any package can be installed

  Maybe that osx el capitan is not compatible with my hardware

  I have the option to restart, but them the trial all repeats

  I checked my drive with disk utility, Go 206 is in use, so I guess that all data are still there, but when I try to stop the installation I have chosen a boot drive, but it does detect any

  I'm stuck here, can someone please help me on how to proceed with the upgrade or start the system in the original version of osx (which seems to always be there)

  The alert comes before or after the automatic reboot?

• Can I run/Install Lotus Organizer 6.1 in Windows 32 / 64-bit

  Compatibility

  Can I run/Install Lotus Organizer 6.1 under Windows 32 bit? I can install it on 64-bit Windows?

  Thank you

  Probably better to ask Lotus (or whatever they are these days.)  Try their organizing forum.

• How can I find out what type of ram and the maximum amount that I can add to my: xp professional 32-bit PC?

  How can I find out what type of ram and the amount, maximum I can add to my: xp professional 32-bit PC?

  Thanks, GregCY

  Original title: RAM

  Fastest and easiest is to go to http://www.crucial.com/systemscanner/ and download and use the scanner.

• How can I re - install NET framework 4?

  Original title: microsoft NET framework 4

  How can I re - install NET framework 4? When I started to learn the computer I accidently deleted. Have windows xp. I ran microsoft NET 4 repair tool. Without success. Windows install gives error "you try to use the network resource is not available." No code.

  No, but I found the Net framework Cleanup Tool which got rid of the original files to a clean install.

  Thank you

• Can eRecovery re-install Windows 7

  I just got a new hard drive, but I need to reinstall Windows 7 on my Acer laptop. Can eRecovery re-install Windows 7?

  
  

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a