Can no longer access secure Web sites after infrastructure changes
OK, before I tell you what is clear, is not the infrastructure changes. I have several other devices that all work very well in the same environment.
Now that what is obvious is the road, here's what has changed.
I swapped my old DLINK router for a firewall PA-200. I can't access to 90% of SSL sites now and I tried just about everything I could find on the subject. I have:
- I connected to another laptop and it works fine
- I have connected an iOS (iPad) device and it works fine
- I have re-registered the DLL.
- I erased slate SSL.
- I have reset all settings
- I started properly
- I have reset the settings of Internet Explorer (even if the problem persists for IE and Chrome)
- I disabled all extensions and modules
- I turned IPv6 on and outside
- I changed the public network to work from home
- I deleted all temporary files
- and I pulled the hair remaining, I had all the way
- I checked the date and time are correct and consistent at the bios level and the level of the BONE
I know there must be something simple and stupid, but for the life of me I can't find.
Thanks in advance.
After many tests, reconstruction, etc... I found the culprit.
It was an 'optional' patch that got out me.
Realtek PCI patch.
I recently upgraded to Firefox 5.0.1 and now the 'lock' icon is nowhere (I don't know) when you access secure Web sites. I've not seen once. It appeared in the lower right of the screen. I also have Norton Internet Security.
Well, in the secure Web sites part of the address bar is allocated to the part of the security certificate. For example, here in these forums you can see your address bar is as follows: mozilla.com . https://support.mozilla.com... The front ' |' ("mozilla.com") is what I'm talking about. For more information on the security certificate, you can mouse over and also clicking on it.
Press "Resolved" If this has helped you.
I just bought a gateway/router RV082 Dual WAN because I have both cable and DSL feeds in my office. Everything works fine until I try to access a secure web site or have a conversation through my Vonage internet phone. In failover mode all works. As soon as I select Load Balancing, I have outages. I do not see this listed anywhere as a 'problem' so there must be some kind of workaround if this isn't a bug. Has anyone else seen this and how did you resolve teas?
The problem you are having is your doing load balancing and traffic to the secure Web site is to get out the two wan. The secure site is waiting for a response from the original wan ip, which has established the connection, and then it receives the response from the other wan ip address. It is a common problem. You can do protocol binding tab management system and have everything that your https traffic out a single IP wan, this will fix this issue.
I change my main e-mail address for my account with an online retailer, but when I tried to connect using my new email address it wouldn't let me. I sent a message to their tech support and after several attempts, I gave up. Then I changed my email address for my ebay account and the same problem, even if my email address is not my user name. I tried to connect to ebay using IE and no problem. I returned and tried the online sales site and it also works with IE.
- "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
- 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".
In production for two years now I have a PS4100XV EQL
Now I'm trying to access his bur of Web interface, I get an error... Blocked application click for details... your security settings have blocked a request sighed with a certificate has expired or is not-yet-valid to run.
I have updated Java in my browser for later and tried all possible browsers.
Please help me
M.Thanks in advance
-->> Java and ActiveX activate all components then Internet Options-> Security
-->> Java Panel-->> lower down the security level of Java
Then it works
We use 10 servers ESXi and normally we support all part of daily work with our vSphere Client.
In addition I could connect each ESXi directly.
If I now like to connect to a single ESXi, I got the following meassages:
1. "be so."
2. "Speichervorgang beim filled fehlgeschlagen."
"... Dateien zur Clientunterstutzung können nicht vom server 'vspereclient.vmware.com' abgerufen werden.
I guess, this will not work after the update to version 4.1.0 502767?
Someone at - it an idea to solve?
Download you and install the latest vSphere Client? You can do it by pointing your browser of choice to the IP address of your ESXi host.
I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.
My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.
I can't open all the Web sites in firefox(version 25), its long loading time, help please
Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update
I hope there, can someone help me. I have the laptop model Toshiba Equium A200 - 151 Vista operating system.
I can connect to the internet and get access to some sites, but others IE my banking online, download itunes and my cell phone online account cannot get access.
Seems to hang and then get "Unable to connect" message etc.
I was informed by phone hotline to make the zero factory, what I did, always the same.
Also now impossible to get any windows updates error message is "Windows could not search for updates error code 80072EE2... and the microsoft online help page is another that I can't get access too."
I would be very grateful for any help.
Thanking you in advance
Very rare problem. My first thought was a virus or malware but I searched a bit and found a solution.
You need to go to Device Manager and should remove the Ethernet device in the list. The reset the laptop and let XP Reinstall the device.
After that, clients should run Windows Update correctly.
After Windows Update try to access the Web sites again.
Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.
Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.
I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.
I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1
Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.
Original title: access to the problem Web pages
I recently got roadrunner as my Internet service provider. I'm unable to access any Web site other than the home pages of MSN & Yahoo. When I try to access any other nested web site (i.e. Favorites) I get a can't connect message. According to roadrunner, it's a problem of mircosoft software as their cheque for their system shows no problem. Someone can help or should I get another ISP.
Oh yes, I also have a hotspot to verizon as a secondary ability that I can use without any problems.
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You can not access the Web sites other than the home pages of MSN and Yahoo.
1. What is the exact error message you get?
2. what browser do you use?
3. what version of operating system do you use?
4 did you do changes on the computer before the show?
If you use Internet Explorer, while the issue may be due to some modules or settings. To check, I suggest you to refer to the section I can access some websites, but not all in the site:
Can't access some Web sites in Internet Explorer
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
Original title: can't access some Web sites.
I have a problem with one of the computers on my network.
Some Web sites will not load on one of the computers (although on all others). The behavior is either it load so slow that it does not (speedtest.net) or it expires entirely (skype.com). This problem persisted for several months (it is one of the computers of my colleague and I administer the network and machines in our office).
I checked things:
1. this problem occurs in IE, Chrome and FireFox
2. it does not occur if I use a web proxy such as hide.me
3. it is persistent even in SafeMode with network.
4. ipconfig/all parameters are the same between this machine and the other without a problem.
5. the problem with Windows Firewall disabled.
6 ipconfig/flushdns does not solve the problem.
7. no viruses or malware were found.
8. on those ping timeout works very well (skype.com with ~ 140ms)
I'm really running out of things I can think beyond trying to reinstall Windows, but I prefer not to do so. Are there possible ideas?
Thanks for posting on the Microsoft community.
This problem can occur because of corrupted system files or settings or due to conflicts between the third-party applications.
- What version of internet explore do you use?
- The computer is connected to a domain?
I suggest you run Internet Explorer in no Add-ons mode and check if it helps, here are the steps:
1. click Start, and then type Internet Explorer in the box to start the search.
2 click Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.
3 test Internet Explorer to verify that it works correctly.
Manage Add-ons in Internet Explorer
Here is the link for more information to add or remove a site to a security zone
Your changes take effect the next time you open Internet Explorer.
For more information, please visit these links:
Hope the helps of information. Keep us updated on the status of the issue persists. We will be happy to help you.
I went to www.pearsonsuccessnet.com to access a book of Texas history. When I signed in and clicked on the link that would pop-up the book he told me that he could not access this Web site. I tried troubleshooting and finished by asking this question. Is someone can shine some light on this situation.
Hi Chikem,Please go to the Microsoft Community Forums.Description of the question, we understand that you are not able to access the website www.pearsonsuccessnet.comIf you could answer a few questions that would help us solve the problem.1. don't you make changes to the computer before the show?2 is the issue specific to this Web site?3. what version of IE are you using?Here are some ways you can follow to resolve the problem:Method 1:Check out the link and follow the steps:Can't access some Web sites in Internet ExplorerNote: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.Method 2:Check out the link:"Internet Explorer cannot display the webpage" error in Internet ExplorerMethod 3:Check out the link:Why can't I view some websites?Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
I can't download my pictures to the usb and the computer does not allow me to download anything at all
Original title: I can not download anything windows8 IE 10 I refresh computer and its worse I can't access multiple Web sites
According to your description, it seems that you are facing several problems on your computer. I will help you certainly with the same. However, we need a few details to better understand the cause of the problem.
You have recently made any changes on your computer, prior to download?
You get no matter what error message when you access the Web sites?
What is the brand and model of your computer?
Y at - it an update of Windows that recently failed?
Note: For the numbers of KB updates of windows, the underlying steps:
Press Windows + C to open the bar of charms.
In the search box, type Update, and then in the list of results, click Windows Update.
In the left pane, click view update history.
From now on, I suggest the following methods:
Start the computer in a clean boot State, and check the status. A clean boot to check if any service or third party application startup is causing this issue.
Clean Boot WARNING: putting your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
Once you perform Clean Boot please perform method 2 to continue troubleshooting.
Make sure that all Windows updates are installed on your computer, as the issue may occur because of some missing security updates.
Please follow the steps to install the available Windows updates.
- Press Windows + C, type Windows Update in the search box, and then click Windows Update in the results pane.
- Click find updates. When the scan finished, click optional review updates.
- Click the check box next to the update, and then click install updates.
- If you are prompted, read the license agreement, then click I agree.
- Follow the instructions on the screen to download and install updates. If you are prompted, restart your computer.
Once all updates installed, please restart your computer and check again.
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
A few extensions you can watch:
- SettingSanity: https://addons.mozilla.org/firefox/addon/settingsanity/
- QuickJava: https://addons.mozilla.org/firefox/addon/quickjava/
Maybe you are looking for
I have a Windows Server 2012 works correctly for 13 months. Suddenly, last Monday, it appeared a blue screen and the rebooted server. Now the server works, but I don't know what the problem was. I don't want to do it againg. Can anyone help?. It's th
I received the following with Eerror messagerror code: 800702E4 as you can see from the file as an attachment to insertedbelow. If I could be more informed about this.
I bought a Tablet Windows 8.1 and opted to have the code sent to my phone. The number was orating twice until I could get a pen, followed 'goodbye '. There is no way to repeat the process. I clicked on "could not complete the process at this time." A
All I want to buy is the digitally if possible. All sites are associated with the CC program now, and I don't know what to do because I can't call a Center Adobe, too.
First sequence 1080 p Pro with 4 K, sent in After Effects 3D Camera Tracker, images get error 'size layer must match Composition and use default values for transformation'Here are the steps:Import images 4 K in Premiere Pro CC 2015Create a sequence o