Can no longer access the Canon Remote Mode UI management (Portal) (on my desktop)

I have set up the Remote UI Mode management Canon (Portal) access using my IPv4 address so that I could make changes to the settings of my imageCLASS MF6160dw directly to my desktop computer.

Which has worked flawlessly for almost 3 months.

Then, all of a sudden 3 days ago I started having this message: unable to display this page

I have not added or removed any equipment or software in my desktop computer.

I also confirmed that my IPv4 address was correct.

And I'm trying to access the 'portal' several times at different times of the day and on different days.

My computer is a Dell XPS 8700 Special Edition running Windows Pro 8.1 (64-BIT)

How can I find the "portal"?

I never got an answer from someone.

But for those who see this thread & can also have this problem, I finally realized that the IP had actually CHANGED.

How & why it changed, I don't know.

But, the last 2 digits changed de.15 a.2

I can now access the management UI remote Canon (Portal) Mode using the IP has CHANGED.

Hope this helps someone.

Tags: Canon Printer

Similar Questions

  • When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet.

    When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet. I have a VPN connection and it works but not navigation parallel to the point where the VPN works.

    Someone suggested this fix >

    Make sure that the default route has NOT changed to the VPN server.

    Open the properties of your VPN connection.

    Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".

    Disable the feature from default gateway.

    but when I do that so I'm not able to access our data HTML site that requires the use of VPN.

    Any help is appreciated

    This article describes what you see...

    http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

    .. .and possible solutions...

    I suggest you post this question in the TechNet Windows 7 IT Pro networking forum can help...

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Can no longer access the connect you on THIS computer

    I can acess my router from all my other except machines to it. This is the machine that I use all the time and I was able to access my router before. He just suddenly stopped being able to access the connection. He not even me to use engineering to access settings. I stop firewall, disabled virus protection. Who were always activated before and I was able to access it. so, not sure what is happening.

    Had to uninstall Kaspersky and reinstall and everything started to work properly again.

  • I can no longer access the services and I can't find msconfig. Can someone tell me why?

    I get a message saying I should start Services help and Support, but I can't find a way to do this.
    I am running XP Pro SP3 on a Dell EVO D510 SFF and use MS Security Essentials.

    To access msconfig

    Start > run > Type msconfig > press enter

    Please rate me upward if you find my post helpful. Thank you!

  • After installing the updates I can no longer access the internet.

    Lan/isp connections still work and I do not have access to electronic mail. It's just the internet connection. When I do a system restore, the internet connection works again. This problem occurred the first day of the updated version (14 I think). I tried to install twice since then, and both times the same thing happened.

    It is a system at home and I am running Windows Vista on my desktop. Cox cable is my ISP. I also have a cisco wireless router, a laptop running windows 7 and a network printer. The computer laptop and printer still function well after the update. Only, I lose the internet connection on the desktop?

    This who should I try to do?

    Hi dream,

    What are the KB numbers of the recently updated Windows?

    I suggest you to follow the steps and check if it helps.

    Method 1: Follow the steps in the link and check if that helps.

    How to troubleshoot network connectivity problems in Internet Explorer

    Method 2: Reset the sock of TCP/IP and check if this may help.

    How to reset the Protocol Internet (TCP/IP)

  • Can no longer access the single ESXi after update 4.1.0 502767

    Hi all

    We use 10 servers ESXi and normally we support all part of daily work with our vSphere Client.

    In addition I could connect each ESXi directly.

    If I now like to connect to a single ESXi, I got the following meassages:

    1. "be so."

    -Installationsprogramm implement

    2. "Speichervorgang beim filled fehlgeschlagen."

    "... Dateien zur Clientunterstutzung können nicht vom server 'vspereclient.vmware.com' abgerufen werden.

    I guess, this will not work after the update to version 4.1.0 502767?

    Someone at - it an idea to solve?

    Best regards

    Download you and install the latest vSphere Client?  You can do it by pointing your browser of choice to the IP address of your ESXi host.

  • Since the installation of Firefox 5, I can no longer access the 'messages' Facebook pages. Any ideas?

    Everything works like before Facebook, but when I go to the "messages" option, the messages are not displayed (but works fine in Explorer).

    I haven't added the new plug-ins or add-ons.

    Everything worked without problem, before I've upgraded to Firefox 5. Other Firefox users, I contacted do not seem to have this problem, so I guess that's maybe a setting, although I made no change.

    The problem seems to have resolved itself on my end, so I think the problem was in the stage of Facebook after all.

    I noticed there is a day that refine Ghostery (anti-complement web monitoring) that the release of certain elements would make the messages section should upward. This does not explain why it suddenly worked fine today (I've changed my settings back to how they were before the problems started), but if you have any kind of add-on or ad-blocking program, it's worth a shot.

  • How can I manually access the safe mode (or safe mode with network) screen in Windows XP?

    How can I manually access the safe mode (or safe mode with network) screen in Windows XP?

    Press the F8 key during startup.

  • can no longer access my iPad

    I your apple ID * that is locked and can no longer access my iPad email cannot unlock your mail I receive your email to reset your password because the mail is locked don't know how, when I created apple id account as the second mail I put the same e-mail for me to the apple and ID mail can unlock that with security issues only one question I do not remember responses. My name is Mary *. The first car * to the first pet *, the * code to email me a Marija1977

    < personal information under the direction of the host >

    Sounds like it might be time to contact the Support of Apple - Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  • His flashes always (white, black) in illustrator &gt; on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

    no longer works because

    His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

    I start the program and then it will begin to Flash white and black.

    On my machine of Tablet and desktop

    I use win10 on both

    need illustrator very soon

    It works again!

    I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

    I hope this helps! (:

  • Cannot access the Console remotely

    Hey guys, I'm new to VM Ware and has difficulties to access the console remotely, even if I can access the Web Access page very well...

    The error I get is:

    Unable to connect to the MKS: unable to connect to the host domain.com: no connection could be made because the target machine actively refused

    When you search for an answer to this, I found a post that said to ensure that the /etc/pam.d/vmware-authd has been configured correctly, as well as the/etc/vmware/config...

    None of these files/folders are there.

    That said, my host OS is (unfortunately) of Windows Vista, with VM Ware running on top of that, and now I am trying to get Fedora Core 11 to present itself as the virtual machine.

    Any ideas you can give would be much appreciated.

    Sorry, I did not myself clear - its port 902 on the host that you need to check that you can telnet to because the VMware console connections are made using the host (so that they can still operate even when there is no network in the comments, for example at installation time), not to the guest directly (for client firewalls are not the parameters used either for the console). I guess that 8333 is fine, otherwise you wouldn't be able to connect remotely to the web console.

    Guy Leech

    VMware vExpert 2009

    ---

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

  • PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    Vista - Windows 7 network connection. username and password is unknown.

    Hello

    I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

    If someone could answer this question, it would be great.

    Hello
    Maybe this can help.

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ------------------------------

    If your network consists only of Win 7 and you want a simple network, use it.

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

    After you have configured the homegroup, scroll to the bottom for the Permission/security section.

    -----------------------------

    Win 7 networking with other version of Windows as a work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

    Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

    Monitoring is done through your audio device, no hearing. When you updated your PC, playback of the audio device settings would have been reset. One of them includes the follow-up of the input jack, and that's what you need to restore. Since we do not know which audio device you use, it's all that we can tell you, except that if it is a device internal, you will need to open the volume control options and he change it. It depends on the good OS versions...

  • Why can't I access the Photoshop CS4 online help?

    Why can't I access the Photoshop CS4 online help?

    http://helpx.Adobe.com/Photoshop/archive.html?AH_ION=true

    This is the link where you can find help for PS CS4 PDF version

    Online help shows you only the help of current version

  • Offline files: can't always access the files in offline mode

    Setup

    At home, I have:

    1. Home Server machine (v1) serving a certain number of shares
    2. Some actions have been made offline on my laptop which runs on Windows 8 Pro
    3. The two machines are not part of a windows domain
    4. Laptop is 'connected' to the Home Server through the Home Server connector

    Question

    Every now and then when working remotely (so not connected to the server) and want to access the folders/files offline that I wonder enter my credentials. All that I get (because I have a number of identities on the Home Server) it is not accepted so I have no way to access files/folders.

    • Restarting the laptop usually does not solve the issue
    • but it seems on the off chance that the question is no longer there and reappers (like today) also randomly

    More info

    • Before having the same configuration accept for the laptop that was running Win 7 I have never encountered this problem
    • Only when I got the laptop connected to my home netwerk (with the available home server) he was asking for credentials
    • The same problem concerns or office family which runs also win 8 Pro

    Did someone encountered this also? And of course, the most important: someone at - there a solution to this?

    Thanks in advance for you help.

    Hello

    The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

    You can check the link to post your question:

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    I hope that helps!

Maybe you are looking for