Can no longer access the connect you on THIS computer

Similar Questions

• When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet.

  When I connect to the VPN on my laptop to use WWAN, I can no longer access the Internet. I have a VPN connection and it works but not navigation parallel to the point where the VPN works.

  Someone suggested this fix >

  Make sure that the default route has NOT changed to the VPN server.

  Open the properties of your VPN connection.

  Go to 'network '. Double click on TCP/IP protocol. Use the button "Advanced".

  Disable the feature from default gateway.

  but when I do that so I'm not able to access our data HTML site that requires the use of VPN.

  Any help is appreciated

  This article describes what you see...

  http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  .. .and possible solutions...

  I suggest you post this question in the TechNet Windows 7 IT Pro networking forum can help...

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• After installing the updates I can no longer access the internet.

  Lan/isp connections still work and I do not have access to electronic mail. It's just the internet connection. When I do a system restore, the internet connection works again. This problem occurred the first day of the updated version (14 I think). I tried to install twice since then, and both times the same thing happened.

  It is a system at home and I am running Windows Vista on my desktop. Cox cable is my ISP. I also have a cisco wireless router, a laptop running windows 7 and a network printer. The computer laptop and printer still function well after the update. Only, I lose the internet connection on the desktop?

  This who should I try to do?

  Hi dream,

  What are the KB numbers of the recently updated Windows?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps in the link and check if that helps.

  How to troubleshoot network connectivity problems in Internet Explorer

  Method 2: Reset the sock of TCP/IP and check if this may help.

  How to reset the Protocol Internet (TCP/IP)

• Can no longer access the Canon Remote Mode UI management (Portal) (on my desktop)

  I have set up the Remote UI Mode management Canon (Portal) access using my IPv4 address so that I could make changes to the settings of my imageCLASS MF6160dw directly to my desktop computer.

  Which has worked flawlessly for almost 3 months.

  Then, all of a sudden 3 days ago I started having this message: unable to display this page

  I have not added or removed any equipment or software in my desktop computer.

  I also confirmed that my IPv4 address was correct.

  And I'm trying to access the 'portal' several times at different times of the day and on different days.

  My computer is a Dell XPS 8700 Special Edition running Windows Pro 8.1 (64-BIT)

  How can I find the "portal"?

  I never got an answer from someone.

  But for those who see this thread & can also have this problem, I finally realized that the IP had actually CHANGED.

  How & why it changed, I don't know.

  But, the last 2 digits changed de.15 a.2

  I can now access the management UI remote Canon (Portal) Mode using the IP has CHANGED.

  Hope this helps someone.

• Can no longer access the single ESXi after update 4.1.0 502767

  Hi all

  We use 10 servers ESXi and normally we support all part of daily work with our vSphere Client.

  In addition I could connect each ESXi directly.

  If I now like to connect to a single ESXi, I got the following meassages:

  1. "be so."

  -Installationsprogramm implement

  2. "Speichervorgang beim filled fehlgeschlagen."

  "... Dateien zur Clientunterstutzung können nicht vom server 'vspereclient.vmware.com' abgerufen werden.

  I guess, this will not work after the update to version 4.1.0 502767?

  Someone at - it an idea to solve?

  Best regards

  Download you and install the latest vSphere Client?  You can do it by pointing your browser of choice to the IP address of your ESXi host.

• I can no longer access the services and I can't find msconfig. Can someone tell me why?

  I get a message saying I should start Services help and Support, but I can't find a way to do this.
  I am running XP Pro SP3 on a Dell EVO D510 SFF and use MS Security Essentials.

  To access msconfig

  Start > run > Type msconfig > press enter

  Please rate me upward if you find my post helpful. Thank you!

• Since the installation of Firefox 5, I can no longer access the 'messages' Facebook pages. Any ideas?

  Everything works like before Facebook, but when I go to the "messages" option, the messages are not displayed (but works fine in Explorer).

  I haven't added the new plug-ins or add-ons.

  Everything worked without problem, before I've upgraded to Firefox 5. Other Firefox users, I contacted do not seem to have this problem, so I guess that's maybe a setting, although I made no change.

  The problem seems to have resolved itself on my end, so I think the problem was in the stage of Facebook after all.

  I noticed there is a day that refine Ghostery (anti-complement web monitoring) that the release of certain elements would make the messages section should upward. This does not explain why it suddenly worked fine today (I've changed my settings back to how they were before the problems started), but if you have any kind of add-on or ad-blocking program, it's worth a shot.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• CRMI: Class AdfConnectionFacade to access the connections of the AAU

  Hello

  Jdev: 11.1.1.7

  WebCenter and UCM: 11.1.1.8

  I am trying to interact with the AAU via API CRMI. According to the use CRMI to access the content - 11 g Release 1 (11.1.1), server

  When I use the AdfConnectionFacade class to access the University Complutense of MADRID "Main connection" thanks to connections.xml (following these instructions), the connection test always fails. I have deployed the app to a managed to webcenter stand-alone server as well. The code is as follows:

          SecurityContext sctx = ADFContext.getCurrent().getSecurityContext();
          this.userName = sctx.getUserName();
          
          IdcContext idcCtx = new IdcContext(userName);
  
  
          IdcClientManager idcClientManager = null;
          IdcClient<IdcClientConfig, Protocol, Connection> idcClient=null;
          DataBinder reqBinder = null;
          
          try {
              idcClientManager = new IdcClientManager();
              
              AdfConnectionFacade acf = new AdfConnectionFacade("localUCMConn");
              boolean ok = acf.testConnection(userName).isSuccess();
              if(!ok){
                  System.out.println(acf.testConnection(userName).getMessage());
                  throw new IdcClientException (acf.testConnection(userName).getMessage());
              }
  

  And the acf.testConnection fails with the following message:

  IdcClientExceptionweblogic: Failed: IdcService='<NONE>', cause='oracle.vcr.jam.JamRepository cannot be cast to oracle.stellent.ridc.convenience.adf.connection.RidcConnection'
  

  I can surely use a db based property or a text file to find the coordinates of connection socket Complutense University of MADRID, but, in this way, I think it will be more configurable from the Console of EM.

  Yet, can someone enlighten me on which is the standard approach to access the connection details and also, how to set up the connection details in the EM console, because I saw no connection of type "Content Server" in the list.

  PS: Announced this request here, as it seems more than one ADF and webcenter linked to a UCM/RIDC one query.

  Thank you

  Vyas.

  Hi Vyas,

  I don't know if RIDC façade class is the right path to follow because of the entry of the next development team:

  The RIDC based (oracle.stellent.ridc.convenience.adf.connection.RidcConnection) connection seems to be associated with the obsolete RIDC connection management code that was created previously,http://docs.oracle.com/cd/E23943_01/doc.1111/e10807/c23_ridc.htm#sthref1487

  This older technology did not meet code of connection appropriate ADF patterns and does not support MDS for customizations after deployment.

  The client should try to avoid using this older connection RIDC management framework code.

  Thank you

  Srinath

• can no longer access my iPad

  I your apple ID * that is locked and can no longer access my iPad email cannot unlock your mail I receive your email to reset your password because the mail is locked don't know how, when I created apple id account as the second mail I put the same e-mail for me to the apple and ID mail can unlock that with security issues only one question I do not remember responses. My name is Mary *. The first car * to the first pet *, the * code to email me a Marija1977

  < personal information under the direction of the host >

  Sounds like it might be time to contact the Support of Apple - Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Why can't I access the new updates of Firefox 4?

  Just updated to Firefox 4 and finished rebooting, but nothing has changed. The browser looks the same as version 3.6.16. I see no Button Firefox, the Awesome Bar does not work, the Stop/Reload have not been combined into one, the Home button has not been moved, etc.. When I check on Firefox, it says I have version 4. I even rebooted in SafeMode with everything disabled and still nothing.

  Any ideas why I'm not able to access the new features?

  Thank you

  The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

  To combine the go-stop-reload buttons, right-click on a toolbar and select Customize. Now drag the stop and reload buttons on the right side of the address bar in reload-stop order

• I did a xp pro login password, which was 12 letters long but the connection only takes 11 and will not let me

  I did a xp pro login password, which was 12 letters long but the connection only takes 11 and won't let me help please

  * original title - administrator password *.

  Hello

  Only 11 characters appear on the screen of Windows XP connection at a time, but if the user holds just type the characters will continue to be entered. Please, continue to type the complete password and verify if you are able to connect.

  I tested just a password 21 characters who allowed me to log in and out without a problem.

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I check if the connection is broken?

  Hi, how can I check if the connection is broken?

  such a code:

  try{
  
  SocketConnection _s = (SocketConnection)Connector.open(address);
  
  }catch(Exception e){}
  

  will return me an exception when I can't connect. But what happens if I am connected to the server for a few minutes and after that something happens that break the connection? How I check that?

  Kind regards

  The following links can help you:

  http://thiamteck.blogspot.com/2008/10/Java-check-if-socket-connection-broken.html

  http://www.velocityreviews.com/forums/t136509-how-to-check-if-a-server-has-disconnected-a-socket.htm...

• His flashes always (white, black) in illustrator &gt; on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

  no longer works because

  His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

  I start the program and then it will begin to Flash white and black.

  On my machine of Tablet and desktop

  I use win10 on both

  need illustrator very soon

  It works again!

  I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

  I hope this helps! (: