Can not access the Internet following couldn't reinstall Vodafone dongle software

I am running Vista Business Edition. I have a Vodafone dongle for mobile Internet access with my HP laptop. The associated software wouldn't load yesterday. I uninstalled and tried to reinstall it. Impossible to reinstall. Since then I can't access the Internet. I can get on my network wireless but no Internet. I tried to get Vista to fix the problem but the joy. I tried system Restore to four different restore points and none have worked. Suggestions, please?

Falco,

'No Mo' is just that this issue could be better addressed by Vodafone. Please check with them to see if they have a solution to your problem:

Tags: Windows

Similar Questions

  • Computer shows as connected... but we can not access the internet.

    Original title: but alas... internet no.

    Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

    I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

    What is causing my computer to change my settings?

    I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

    In your case, the DNS server is the router.

    Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

    This is usually:

    1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
    2. Your computer network security key does not match the one in the router.

    1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

    2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

    3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

    4. If after all the above does not correct the problem, you must replace your router.

  • Satellite A110-277: can not access the internet wireless

    Hello
    I have a Toshiba Satellite A110-277. We have wireless internet access in our House and it was workin fine, but since a few days I can not access the internet. My laptop is certainly recognizing internet connection wireless, but through IE or Firefox it just does not connect.

    For some reason, he worked briefly through Firefox, but then that stopped. I don't see what anyone, I have done differently, other than (finally) updated Windows Media Player, but why would that cause problems, I don't know!

    I would really appreciate help as soon as POSSIBLE, that the internet is my lifeline to work!
    Thank you
    GcDh

    Hello

    You said
    > My laptop is no doubt recognize the wireless internet, but does not connect via IE or Firefox, it's just
    Hmm, I guess that you can connect to the WLan router and can insert the WiFi encryption key successfully right I'm right?

    How does LAN connection? Can connect you to the internet using the LAN cable?

    Feedback would be appreciated

  • When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

    Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

    System details:

    Motherboard: ASUS P8Z77-VLK
    CPU: Intel Core i7 3770 K
    RAM: 8 GB
    OS: Windows 7 x 64

    Hi, Mahesh,

    and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

    Best regards
    Greg

  • Tecra M5: Can not access the internet pages, but can ping in cmd.exe

    Hi all, this is confusing to me.

    I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

    -Intel Pro Wireless adapt
    -Drivers audio Sigmatel
    -nVidia graphics card

    Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

    I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

    I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

    I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

    Thank you very much

    MARC

    Hello

    According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

    Well, in your case I would first check the router settings and re still.
    In addition, you must reset the router.

    Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
    Please note that the TCP/IP protocol settings must be set to automatic.

    Check everything first!

  • can not access the internet even if my wifi connection status is "enabled", I go to another user and am connected, get updates and others and have the ability to nav.

    Windows 32-bit Vista on a HP laptop, wifi is on State is enabled and still on the past of the main user unrelated real, even when the State is supposed to be activated, I went my way, any other user and get the updates to download and other connect ability.  Can someone help me change it's for a 76 year old mother, who gets very nervous sometimes with the laptop that I gave him, help me please... Stevielee

    Hi Stevielee,
     
    1 you get an error message when trying to go online?
    2. what web browser do you use to go online?

    You are able to go online to a different user account. There must be a problem with the settings of the web browser. Try these steps and check the result.

    Step 1: Reset the Internet Explorer settings.
    1. Click Start, type inetcpl.cpl and press to enter.
    2. click on the tab advanced and then click Reset.
    3. click on reset.
    4. When you are finished, click Close, and then click OK.
    5. close Internet Explorer and reopen it before the changes take effect.
    6. check internet connectivity.
     
    NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
     
    For more information on "Tips for solving problems with Internet Explorer", visit this link:
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

    Step 2: If the problem persists after you follow step 1, try to correct the user account.
    Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
     
    Try the steps and post back with the results, so that we can help you further.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • VPN established but the customer can not access the internet... Need help.

    Hi all

    I'm trying to get a functional ASA 5505 appliance but does not always succeed. I managed to get connected to the ASA VPN client, but once connected, vpn client cannot access the internet. I am trying to route traffic from the client to the VPN server so I don't want to split tunneling. Here is the sketch of the testbed of the network:

    DNS:210.193.2.66
    |
    |
    Inside   ---------  Outside                         ---------          -------------------
    192.168.1.1 |         | 202 *. *. 84 202.*. *. 1.         |          [                  ]
    ---------------------- ASA |-------------------------------------  GW  |----------[ INTERNET ]
    |                   | 5505.                    |                |         |          [                  ]
    |                   | --------|                    |                 ---------           -------------------
    Host_A                                          | 202.*. *. 83
    192.168.1.5                                -------------
    | NetGear |
    | Router |
    --------------
    | 192.168.2.1.
    |
    |
    HOST_B |
    Physical addr:192.168.2.2
    Addr:192.168.3.1 VPN

    The ASA 5505 config is as shown below:

    Output from the command: 'show running-config '.

    : Saved
    :
    ASA Version 8.2 (1)
    !
    ciscoasa hostname
    activate 0cMYKRmmOdVhcSr4 encrypted password
    2KFQnbNIdI.2KYOU encrypted passwd
    names of
    !
    interface Vlan1
    nameif inside
    security-level 100
    IP 192.168.1.1 255.255.255.0
    !
    interface Vlan2
    nameif outside
    security-level 0
    IP 202.*. *. 84 255.255.255.128
    !
    interface Ethernet0/0
    switchport access vlan 2
    !
    interface Ethernet0/1
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    passive FTP mode
    inside_nat0_outbound list of allowed ip extended access any 192.168.3.0 255.255.255.224
    pager lines 24
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    IP local pool vpnpool 192.168.3.1 - 192.168.3.20 mask 255.255.255.0
    ICMP unreachable rate-limit 1 burst-size 1
    don't allow no asdm history
    ARP timeout 14400
    Global 1 interface (outside)
    NAT (inside) 0-list of access inside_nat0_outbound
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Route outside 0.0.0.0 0.0.0.0 202.128.171.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    Enable http server
    http 192.168.1.0 255.255.255.0 inside
    http 192.168.1.0 255.255.255.128 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    enable client-implementation to date
    Telnet timeout 5
    SSH timeout 5
    Console timeout 0
    dhcpd outside auto_config
    !
    dhcpd address 192.168.1.5 - 192.168.1.20 inside
    dhcpd dns 210.193.2.66 210.193.2.34 interface inside
    dhcpd allow inside
    !

    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    WebVPN
    Group Policy Reveal internal
    Group Policy attributes Reveal
    Protocol-tunnel-VPN IPSec
    username password alice tnbrh7ICan8mnq/Y encrypted privilege 0
    alice username attributes
    Strategy Group-VPN-Reveal
    tunnel-group Reveal type remote access
    tunnel-group reveal General attributes
    address vpnpool pool
    Group Policy - by default-Reveal
    tunnel-group show ipsec-attributes
    pre-shared-key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    !
    global service-policy global_policy
    context of prompt hostname
    Cryptochecksum:bfb0083a8eb2416e9cc27befe3b224d9
    : end

    a few thoughts

    permit same-security-traffic intra-interface

    NAT (outside) 1 your pool of vpn client

    ASA sysopt connection permit VPN

    ASA sysopt connection permit-ipsec

  • BlackBerry smartphones can not access the Internet using the browser

    Problems tonite to access the Internet using the browser button... get several different messages, the first was:

    ERROR HTTP 500 internal server error... An unexpected condition has occurred...

    then ERROR HTTP 503... server overload

    I can't access using Menu.then by clicking on the bookmarks saved... any ideas anyone?

    Hi and welcome to the forums!

    Open the browser, options, cache operations, delete all categories.

    The go to the configuration of the browser, scroll to the identification of the browser, change Internet explore!

    Battery pull. See how it works.

    KB11266 HTTP 500 error when you use the browser

    Thank you

    Bifocals

  • Comments (Ubuntu) can not access the internet through host (XP)

    I used Google to find a solution as to why guest (Ubuntu) cannot access the internet. Host system is Windows XP. None of the solution has not worked for me. Solutions that worked for others: 1 activation NAT 2. Allowing the shared internet connection

    I think the problem is that my host and guest use different subnet masks default (respectively 255.255.0.0 255.255.255.0 vs) assigned by DHCP. The host's configuration manually to use the same subnet mask doesn't help either. I guess that I have it configured incorrectly.

    Welcome to the community,

    I think the problem is that my host and guest use different subnet masks default...

    Your configuration looks like, it has been changed manually! Default vmnet8 (NAT) on the host computer has an IP address like 192.168.x.1/24, comparable to vmnet1 (Host-Only). I suggest that restore you the configuration to its default settings that should work as expected.

    André

  • Why my wireless router can not access the internet?

    Since my ISP was purchased by another company I had problems to connect to the internet. 8 years with the former ISP I've almost never had a problem and if I did corrected himself very soon. I haven't changed anything on my end, but I get the info. below of Wireless Diagnostics. I hesitate to call the ISP because I don't want it must make changes that can not help and then I have I don't know how to get back to square one. I have tried everything that I read on the subject of internet connections has dropped, but it makes no difference. I use airport Time Capsule as my router wireless because of its 802.11ac technology while the Actiontec AGT784WNV Wireless Gateway is only 802.11n. Thanks for any help you can offer me.

    We need a lot of details.

    Perhaps the best way is a screenshot of the page summary of TC...

    That is to say, click on the TC icon in airport utility.

    It gives me a lot of valuable information.

    And I'll probably reset you your TC at the factory.

    Since you are concerned to recover the old settings make a backup now.

    Click Edit in the summary page... and in the main menu, click Export configuration.

    Now you have a way to restore the settings you... Although I don't think you want instantly.

    If we remove the fear factor that can help.

    If your ISP changes the settings a full reset and reconfigure the TC is usually required.

    Universal factory reset

    Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

    NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

    The installer the TC.

    Then redo the configuration of the computer that you want to use for TM using Airport utility.

    1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

    for example TCgen5 for the base station and the name of the TCwifi wireless.

    If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... for example. TC5ghz

    2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

    ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

    If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

    Ignore this point if you don't understand it... after the return if you drop questions.

    4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  • WEBVPN (IOS) can not access the internet

    Hello

    I am to evaluate WEBVPN (SSL VPN) functionality on the router CISCO 1921.

    I can establish a VPN connection with anyconnect and access the intranet local, but I can't access internet.

    I don't know what happened with the packets intended for internet.

    Below, I'll send webvpn configuration:

    GigabitEthernet0/0 is LAN interface

    IP nat inside source static tcp 192.168.100.1 5443 94.140.xx.yy extensible 5443

    WebVPN gateway GATEWAY WEBSSL
    interface IP port GigabitEthernet0/0 5443
    SSL trustpoint TP-self-signed-4050442324
    development
    !
    WebVPN context ASCAL SSLVPN
    secondary-color #990000
    title-color black
    list of authentication SSL - VPN from AAA.
    Gateway GATEWAY WEBSSL
    10 Max-users
    !
    SSL authentication check all
    development
    !
    Group Policy SSLVPN_POLICY
    functions compatible svc
    SVC address pool "vpn_pool" netmask 255.255.255.0
    generate a new key SVC new-tunnel method
    mask-URL
    Group Policy - by default-SSLVPN_POLICY
    !

    Thank you in advance.

    Kind regards,

    Herman

    Hello

    Make sure that you have the list of nat source configured to allow the VPN pool, if you want to use internet from the router or you can use split tunnel to allow only internal traffic on VPN

    example:

    SVC split Router (config-WebVPN-Group) # include 198.168.100.0 255.255.255.0

    SVC split Router (config-WebVPN-Group) # include 192.168.200.0 255.255.255.0

    Kind regards

    Averroès.

  • My laptop can not access the internet.

    Hello

    I hope someone here can help me. I tried everything I can.

    Here's the situation. My connection was fine, when suddenly my computer turns off (it's happened). When I turned it back on I had no connection. I ran Network Diagnostics and tried every suggested repair. So I called At & t tech support and we checked everything he could think of. The last thing we did was an "ipconfig" and found that my ip address has been starting by 169. He believed meant that my network card was bad.  Also, after running the network diagnostics, he said "there could be a problem with 1 or more network adapters on this computer.

    I did everything that is obvious.  I ran the ethernet cable directly to the top of the tower.  Ive took my laptop to the library with a free internet connection.  It certainly is a problem in the laptop, not the router or cable or internet service.  I tried a system restore - but he said no changes, I downloaded and reinstalled the driver, I checked that the parameters of intellectual property have been updated with automotive and DHCP is enabled, and I have disabled the firewall. I went to the store and got an adapter wireless usb - no difference.

    Someone on another site recommended I try this: I did an ipconfig release & renew, I also did winsock.

    I haven't downloaded service pack 1, but I had to update automatic, put in place all the time, that ive had the computer.

    Anyone have any idea what could be the problem?
     
    No indication in this regard would be VERY useful and appreciated. I look forward to your reply. Thank you.

    Hi Jkeisling,

    Thanks for your answers,

    If 127.0.0.1 shows a timeout of the request then the problem is with the NIC itself.  There are a few steps I want to confirm, however, because I want to make sure that everything in this information also indicates this issue.

    1. To answer your question from the previous mission, you have a NETWORK adapter for the WIRELESS CONNECTION and a map NETWORK DISTINCTE for setting UP a CONNECTION.  We will work on the 1st wireless.
    2. High without cables connecting the set UP a CONNECTION to the router from a command prompt type PING 127.0.0.1 and check if you get a request to the time again.  Let us know if you get a different answer.
    3. Click on the ROUND of Start / Select NETWORK / NETWORK and SHARING CENTER / manage network connections / - you should see two listed WLAN cards - one is the wired network card and the other is for the wireless network connection
    4. Double-click the wired connection of card - on the tab general it is an option for more details
    5. What we need to put you in this information is Description - which should be the manufacturer of the card DHCP active Yes/No - what the address next to the IPV4 IP ADDRESS: something similar to 192.168.1.7 We also address of IPV4 default GATEWAY; and the MASK of the subnet IPV4 address
    6. Once the information is obtained, then CLICK on the wireless ADAPTER and get the same information about the WIRED ADAPTER.
    7. Once you have this information, please insert the forum what TYPE of ROUTER you are using on your network so that we can also consider whether it allows the reset of the DHCPFLAG as stated in the previous steps.
    1. Please report all information requested in the forum.

    Of what has been done, I'm not ready to give up everything and it's hardware related, because sometimes, I saw a 127.0.0.1 ping back be exceeded demand, in particular, since do not determine if we had the correct wireless connection or correct the connected earlier.  We want to just make sure.  At this point, I'm leaning more towards the router allows flag DHCP requests whether it disables it.

    Thank you

    Debbie
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Networking - can not access the Internet since I refused the offer of renewal for the Windows Live OneCare safety

    It seems that since I refused the offer of renewal of Windows Live OneCare security - which costs $50.00 per year - but is FREE via my ISP no longer, I can access Internet Explorer or is applications such as my printer, sounds etc... I called the mfg and they want $100.00! Seems that the warranty is sold out, as well!  Is there someone who can help free of charge until I get MORE money for MS?  I contacted my ISP & everything works well on their end, it's a problem of network management - they showed me how to run in safe mode to fix this problem.  Hope it works & thank you for the help!

    http://OneCare.live.com/standard/EN-AU/default.htm

    It is an abandoned product.

    http://social.Microsoft.com/forums/en-us/category/windowsliveonecare/

    I have suggesty repost you in the Forums above Windows Live OneCare.

    See you soon.

    Mick Murphy - Microsoft partner

  • Just reinstalled Windows and now I have no drivers and can not access the Internet to download. How can I get the drivers?

    original title: PRODUCT KEY

    Hi my pc which had winds family xp is crushed and don't work so I bought a windows xp reinstall cd and that worked and I have windows xp family, but not drivers? How dod to get drivers for my tour? I have me product key if this helps without drivers I carnt get on the net or anything like that iam using my laptop slot the cheers of min

    Not much help on their website, but here is the link to contack Zoostorm: http://www.zoostorm.com/ContactUs.aspx

    J W Stuart: http://www.pagestart.com

  • Load firefox 3.6.14 and now can't access the internet. Computer restored to the previous version works now. 3.6.14 I tried again and the same problem, any ideas?

    Using windows 7. As soon as the update of firefox, I can not access Internet. I tried Internet Explorer works well. I have restored the previous computer Firefox and it works fine. Tried the update again and the same problem can not access the internet.

    This is usually caused by a firewall blocking the new version of Firefox. For more information, see https://support.mozilla.com/kb/Cannot+connect+after+upgrading+Firefox

Maybe you are looking for

  • can not give because my count will not go to a site that I do not agree.

    I try to make a donation, but noscript will allow a computer to be taken to unknown sites or use programs not known or approved.What is the legitimate site for donations?

  • Why iCloud must my iPhone password for 2-factor authentication?

    I have two factors of authentication enabled for my apple ID.  When I change the password on my iPhone iCloud makes me enorter my new password to secure my data iCloud.  Thus, apple stores our password in the cloud on their servers?   Anyone?

  • New LCD screen of need for Satellite L20-173

    Can anyone help I need to get a screen for my laptop everything else works fine, I can have someonesolve this problem for me when I found one and what is the cost? The specs for the laptop are model L20-173.

  • HP envy 15 m6 connectivity problem

    I've had this laptop for 1 year and a half. I had good results until recently, the Internet has been uncertain, it disconnects or has limited internet. I tried many solutions to reset winsock, to reinstall the driver. I tried to update the driver, di

  • When I restart my computer the printer prints once

    When I restart my computer the printer prints once after that I get a message indicating an unknown error has occurred I updated the drivers and of the United Nations and re installed no change?