Can not access the recovery on M30 partition

Similar Questions

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.

• Can not access the Recovery Mode

  Hello guys,.

  I have a very annoying problem.

  I can't enter mode recovery on my iMac 27 "late 2011, El Capitan 10.11.1.
  After pressing 'control' + 'r' at the start, the recovery mode is loading, however, when the progress bar reaches half width computer is turn off.

  When I try to access the Boot Manager ('option' button) turns on but after the selection of the recovery disc the situation in almost the same thing - is to turn off the computer.

  It is a very annoying problem because if I have problems I won't be able to fix my Mac...

  I await your response.

  If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

  Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

• Lack the profile can not access the Profile Manager, cannot be continued

  Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...

  I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.

  In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
  • http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
  • < User > /users//Library/Application Support/Firefox/profiles.ini

  See also:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

• Satellite A110-277: can not access the internet wireless

  Hello
  I have a Toshiba Satellite A110-277. We have wireless internet access in our House and it was workin fine, but since a few days I can not access the internet. My laptop is certainly recognizing internet connection wireless, but through IE or Firefox it just does not connect.

  For some reason, he worked briefly through Firefox, but then that stopped. I don't see what anyone, I have done differently, other than (finally) updated Windows Media Player, but why would that cause problems, I don't know!

  I would really appreciate help as soon as POSSIBLE, that the internet is my lifeline to work!
  Thank you
  GcDh

  Hello

  You said
  > My laptop is no doubt recognize the wireless internet, but does not connect via IE or Firefox, it's just
  Hmm, I guess that you can connect to the WLan router and can insert the WiFi encryption key successfully right I'm right?

  How does LAN connection? Can connect you to the internet using the LAN cable?

  Feedback would be appreciated

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• Can not access the updates XP, 0x8024400A error message.

  I reformatted my HARD drive, reloaded XP SP2 Home. Download IE 8. I need XP SP 3, but now I can not access the updates... 0x8024400A error message.

  Help please

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  This should move your 0x8024400A problem. So try and get up-to-date with the Windows updates. You will probably have to go through Genuine Windows Validation.

  Tricky

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Computer shows as connected... but we can not access the internet.

  Original title: but alas... internet no.

  Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

  I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

  What is causing my computer to change my settings?

  I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

  In your case, the DNS server is the router.

  Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

  This is usually:

  1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
  2. Your computer network security key does not match the one in the router.

  1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

  2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

  3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

  4. If after all the above does not correct the problem, you must replace your router.

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Can not access the rows of an item of table no-netsed in execution of the embedded R

  Hi all

  I am running a script R (R running embedded) oracle database

  I use under request

  Select *.
  table (rqEval (cursor (select 'divider' 50, 500 "numDots" of the double),))
  "select 1 id, 1 double val,"
  'myRandomRedDots2'));

  
  

  I want to save the result in a variable. So under anonymous block has written

  
  

  declare

  ID number (10);

  Val number (10);

  Start

  SELECT id, val in id, val

  table (rqEval (cursor (select 'divider' 50, 500 "numDots" of the double),))

  "select 1 id, 1 double val,"

  'myRandomRedDots2'));

  end;

  /

  But I get the error "can not access an element of no nested table lines.

  The one you suggest please how to fix this.

  Thank you

  Billa

  
  

  Billa,.

  You see the error "can not access the lines of a no nested table element" of PL/SQL, because rqEval (..., ' select 1 id, 1 double val ',')

• I have a cc has photoshop &amp; lightroom, but can not access the mobile app for my ipad, I get a free 30-day trial?

  I have a cc has photoshop & lightroom, but can not access the mobile app for my ipad, I get a free 30-day trial?

  Hi Michael,

  Please try the below mentioned steps to activate Mobile with Lightroom.

  • Kindly sign out and sign back into creative cloud on your machine: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
  • Please also synchronize lightroom desktop and mobile with the steps mentioned in the link: using Adobe Photoshop Lightroom | Lightroom - computer desktop and sync Mobile app

  Thank you

  Atul Saini

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• Error: 303: unable to load a resource: can not access the resource file (try loosening Flash security)

  Error: 303: unable to load a resource: can not access the resource file (try loosening the Flash security settings): error #204 in shockshare.com and putlocker.com any help please?

  When I was watching a movie... There was a link, I always watched movie shockashre and putlocker.com but today, I saw this problem and don't kno how to solve

• Re: Equium P300-P6T - double boot, need to reinstall but can't access the recovery

  Hello

  Have a friend s EQUIUM P300-P6T wishing me fix but recovery issues.

  It currently has windows 7 installed on separate partitions WXP can choose which operating system to start when loading. The factory for the laptop is Vista but it has replaced the one with 7.
  However, some of the Vista Boot files are damaged and cannot be mounted by Windows Recovery then resembles a new Vista installation is necessary.

  This should not seem like a problem but:

  (a) I tried holding 0 down as I turn to access the recovery partition (which still exists I see it within the management of the computer if I load xp) but it doesn't do anything, so I can't recover from the recovery partition.
  (b) I tried to reinstall Vista on this partition by using a disk of vista OEM however, when it happens at the stage of "complete installation" the progress bar stays in the same place forever about 3/4 of the way through as if it crashed.
  (c) I managed to get an installation of windows 7 on it, but when I charged it, it does not recognize the keyboard or a touchpad (even if not a problem with the drivers for each), and yet the cursor can be moved with a USB mouse is connected. In addition, the boot partition has now given a choice of "xp", vista, the older installations of windows

  I now put the computer to the original state, it was at the moment. However, the road I want to go down is to use the recovery partition to restore the factory settings on this particular partition and Vista.

  Does anyone have ideas how I can do this, or what is my best solution? As I said, now pressed 0 while starting has no effect yet the recovery partition is still existing on the hard drive.
  Unfortunately there is no recovery media that I have access to.

  Thank you

  Hello

  The whole story is very interesting and I wish I could help somehow. Your ad is quite long with very useful information, but, if I understand you correctly, you want to just install Vista original recovery image. Can you confirm this?
  If you have any other questions please ask one by one, and then we can answer one by one.

  Anyway, if your answer is YES here is my explanation:
  Saved on the HARD drive recovery image can be used with the factory only settings. With other words: when the original recovery image is installed, you will have full access to this recovery image. In the case where some other OS is installed (Win7 or WXP) this original condition will be overwritten and you will lose this recovery option (HARD drive recovery facility). Only way it have factory settings again is to use the recovery DVD disc. If your friend didn't create this disc (without taking into account the recommendation of Toshiba s) that you have big problem now.

  Please tell us once more what are your options now. What do you do now?