Can not activate my cell phone after replacing hard drive

I can't activate the computer

Also the error message when I try to download content

Hi Trevor,

What is the accurate and complete error you get when you try to activate Windows 8?

If you have made significant physical changes to your PC, like replacing your hard drive or motherboard, you will need activate Windows by phone. To learn how, go to the article of the product activation .

See also the link: http://windows.microsoft.com/en-US/windows-8/why-activate-windows

Post us the results after trying the steps above.

Tags: Windows

Similar Questions

  • HP Pavilion 17: mouse pad does not work after replacing hard drive

    Hello

    After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

    I installed the Synaptics driver but it didn't help.

    How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

    USB mouse works fine.

    See you soon

    The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

  • Satellite 1410 714 extremely slow after replacing HARD drive

    Hello

    I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

    I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

    Thanks for help.

    Hannu

    Hello

    I can t think the motherboard is broken after replacing HARD drive.
    I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
    Please check site driver Toshiba for the latest version of BIOS.

    Have you used any anties Virus applications?

  • After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

    Original title: dvd player

    recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

    Duplicate the content of the thread:

    After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

    My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

    Hello

    You can check these links and try...

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    http://support.Microsoft.com/kb/982116

  • Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

    I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
    So, how can I put the o/s back on?

    Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
    But I've never tried this procedure and don t know if it will work.

    But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
    After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

  • I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Y at - it something I can do.

    I can't save Acrobat 8 standard after a hard drive failure and keep getting an error every time I try and use it. Is that what I can do to get rid of the message. The message reads "a problem has been experienced while trying to send information on the internet.

    Hi philh76405255,

    I'm sorry for the inconvenience caused.

    Please refer to the following solution: -.

    (1) find the file acrobat.exe on your computer. Right-click on the program and click "troubleshoot compatibility". Set the compatibility of the operating system installed on your computer.

    (2) if it asks you to register several times, please refer to this doc. KB: easier to register several times. Acrobat 8 | Windows

    That might solve your problem.

    In case if you have still any question, please let us know. We will be more than happy to help you.

    Kind regards

    Nicos

  • Can not activate it three fingers after updating to Mac OS Sierra

    After the macOS Sierra update, I somehow can not activate this three finger drag more: I tried multiple combination: activation and reactivation of the finger three, activation and reactivation of the research, restart my MacBook Pro and nothing happens. That bothers me a lot because I get used to it.

    Just in case where to try this support article > turn on "three fingers" for your touch trackpad of Force - Apple Support

  • HP Officejet 6600. Phone smart Samsung SIII. I can not connect my cell phone to my printer.

    I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop. Any suggestions on this problem as well, please?

    I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

    SwampDoggie wrote:

    I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop.

    You must configure your firewall correctly.

    I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

    What exactly is the error message?  Make sure that it does not ask your network SSID password?

  • Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    Original title: Windows Update

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

  • eMac stops almost immediately when starting after replacing HARD drive

    Hey all!

    I need to explain a bit for this one, so please bear with me. Thank you.

    Long story short, I've had a few eMacs for quite a while now and I recently found a use for them. I created a (it is running 10.4 with 1 GB of RAM and a > G4 processor at 1 GHz, can't remember) and used it for a while before randomly power loss and refused to stay on for more than a few minutes. I tried to replace the PMU battery with one of the other Mac and pressing the reset button, which leads to stop showing signs of life whatsoever (even after the replacement of the original battery).

    Thinking I had it bricked, I got out one of the other Mac with a plan to give the disk of death. This new Mac running 10.5, perfect with another > G4 processor at 1 GHz (but only 768 MB of RAM this time). The only quirk I noticed is the TRC took abnormally long to warm up, black time with only red but gradually more luminous and no longer red colors of departure. It was about normal 5 minutes after that OSX end of initialization. In any case, I went to swap out hard drives and put everything to the top, to see that yet again, this new Mac does not work!

    If it has been awhile since the last attempt to start the CRT will do its usual "bong" noise before machine clicks (sorta like a relay of power off) and nothing else happens. If I try again, the CRT is silent (no doubt he is already warm from the last attempt to start?) and you can hear two clicks - one that looks like something to turn it on, then turn it off even on front. These clicks are different lengths apart - usually, this is only a few seconds, but sometimes longer. There was a few times where the fans have started between clicks and I've even heard the startup chime on an attempt (which got me excited - but no, it clicked and distributed repressed). The CRT does not seem to do anything other than bonging from time to time (but it can turn on - I can't say because of the problem of the warm-up that I mentioned earlier).

    I would really like to be able to resurrect this old Mac once again - I have the vague feeling that I broke it when replacing the HARD drive. I'm pretty sure that I have not forgotten all the internal cables, and I tried not to touch anything other than the HARD drive and the enclosure of the logic board (ended up having to remove the blower housing too, however). Two Macs are model A1002 and both have serial numbers in the YM412xxxxxx - YM520xxxxxx range (eligible for repair program?). I don't know if they were actually taken repair back in the day.

    In any case, I hope you guys can help out me! Thanks in advance!

    (P.S the first eMac is well beyond repair. I have also a third one - it is better to go by replacing the HARD drive again? It is worth noting that the PMU battery has been sitting on my desk for a while now. "It was probably flat anyway).

    The HARD drive would be the problem? It seems that it is.

    See if you can just unplug the data cable from HARD drive and try to hold down the alt or option to the startup/power.

  • Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

    I had a HARD drive error.

    So I formatted the hard drive (after trying for months to get the process to finally finish that)
    Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

    I searched the net and found nothing of use!
    Help, please

    see you soon
    Nick

    Hello

    You need to create the own recovery in the past disc!
    This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

    In case you have not created this disk, it is possible to order this support:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Satellite L650D: How recover after replacing HARD drive?

    How can I get toshiba if retrieving my old hard drive completely crushed?

    You will need to reinstall the system.
    If you want to define the notebook to factory settings, you would need a Toshiba recovery disks
    Did you create records in the past?

    If this isn't the case, you can order it here:
    http://backupmedia.Toshiba.EU/landing.aspx

    In case you n t to use a recovery disk, you can use a MS Windows disc clean. The essential drivers may be downloaded from the Toshiba driver page

    Its your choice...

  • Can not activate XP at HOME after a re installation of repair

    My son started the repair facility before the recording of the WPA.dbl file then please, don't bother to tell me, we should have saved the file - or any other could have, would have, should've solutions.  We have to deal with where we are.

    The repair facility has been a success and we checked we have IE 6 on the machine.  After consulting the MS site, we followed the steps that they have exhibited that was supposed to fix this problem - check the registry under HKLM\Software\Windows NT\Current Version\Notify\RESETS file and delete it (it wasn't even) - we have renamed WPA.dbl WPA.old and expanded the WPA.dbl to the installation CD C:\Windows\System32 and we checked and there's associated files (reset5.exe reset5.dll (, etc. and Svyany.exe) and there is none of the people present, all this was done in plain old safe mode you can get in.

    We have restarted following the instructions and are immediately asked to activate your version of windows - we click Yes, we answer really Yes to register at the same time, the activation of Research Assistant an internet connection and can not find an automatically - so he asks us to clarify and tell us that it looks like Cable\DSL and to automatically detect network settings local (there is no proxy - or router - or a divider) there snoring away but can't find still not all connections.

    If you simply reduce the Assistant, you can see the desktop- and it's our office with all programs, sup dirs etc. that we recognize - but there is no "Start" button or toolbar at the bottom of the screen - and nothing will take place as the the Task Manager, the Manager of Panel or control device.

    So all we CAN do is to return to the wizard and make a selection between 'specify a dial' or select "remind me later". Any one of them is chosen, you are disconnected and returned to the home of the screen - when the process repeated ad nauseam and infinitum.

    But back we go in safe mode and log in as long as administrator - we tried to check the connections of the network here and get the message that windows is unable to retrieve the network for this computer connections.  If you try to login in safe mode WITH network connections, you immediately in this case of activation in a loop as if it were normal. However this time - in plain safe mode - you CAN access device manager and network card appears and it is correctly listed with the correct driver.

    We also tried to reset the cable modem, call Comcast and have them check that the modem is not working properly everything well - my other computer use it without problem although it is not a cable problem

    So, to summarize.  I just need to activate Windows and I need to get the machine to see a network connection to the network card how can I do that is in the Console Windows Revovery or plain Safe Mode and logged in as administrator and the use of programs that are available and work in safe mode.

    Windows XP Home Edition (retail)
    on a HP machine - only is not that matter the machine is not a hardware problem

    Thank you

    Although they were no help - they just sent me my computer manufacturer - who wanted to charge me all outside to "solve" the problem - so I simply started in safemode, copied all my files that I needed power the computer off and did a clean install.  Who crossed the fine and all now I will update / reinstall land for the next 2 days

    It's really a shame that all Windows OS seem to need so much attention and TLC - makes me long for the old days of BACK

    In any case thanks for the suggestion

  • How can I give my cell phone after my account has been blocked?

    Hello, I have a contact who is extremely important. He's been blocked because of a virus, I think, microsoft says that many messages have been sent. In any case I log, and I see "your account is blocked." He asked me to provide a code to another contact I can access is no longer. He asks me my cell phone, so I can't get the code to unlock it! How can I provide my mobile phone? Or any other form of recover my account? (I can provide info on my account since then contacts dates ECC.)

    Hi lucalivraghi,

    Given that the problem is related to Windows Live, you can post your query to Windows Live Solution Center.

    Hotmail - Windows Live Solution Center Portal

  • Can not activate CS4 Web Premium after the upgrade Hard Drive Mac OS x 11.3

    I can't access any program now CS4 after upgrade my hard drive to an SSD. I get a small dialog box saying "license for this product has stopped working. Error code 150:30"MacBook Pro, OS X 11.3 (el Capitan). The chat tech support person told me that CS4 is "not compatible" with El Capitan, but I've been using Cs4 for several months now with El Capitan, so it's not true.

    In the past, when I've got a new Mac or upgraded the operating system, I had the opportunity in an Adobe dialog to enter my serial number in, but this is not the case now.

    Nothing has changed since this morning except my newly upgraded hard drive. Except that this time I don't have a way to enter my serial number and reactivate.

    Can anyone help?Screen Shot 2016-02-03 at 11.57.20 PM.png

    Error 150:30 - error "Licensing has stopped working". Mac OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Maybe you are looking for

  • SBRIO DIO still available with 9693 mezzanine card?

    Hello! I intend to use a SBRIO (9626) and a map of mezzanine 9693 for plugging a 9853E module CAN. However, I would also need interfacing #20 DIO, 4AI and 4AO. The signals will be be wired on J502 and J503 connectors. Using 9693 mezzanine card, alway

  • where can I buy a recovery cd?

    Hello about 3 weeks ago my my computer laptop idk what happened to her all that it has been deleted from my hard drive I think it was my Windows 7 too, I couldn't reset default factory. So where can I get a recovery for Hp pavilion dv7-6c93dx Enterta

  • Failure ID: GLHJ10-5N46PP-MFH15G-60UH03

    Memory test: past INTELLIGENT control: passed DST short: failure Failure ID: GLHJ10-5N46PP-MFH15G-60UH03 Product ID: LM726AV Hard drive 1 I don't know how to read this, but my laptop worked hot enough recently... perhaps it's something to do with it?

  • BSOD: Need help! minidmp are displayed.

    Got a new Dell OptiPlex 3020 unpacking running Windows 7 Professional 64 bit intel i5 processor and 8 GB of RAM.  Summer do BSOD intermittently.  Is the software that I have loaded here until this latest versions of adobe reader and flash, Microsoft

  • frequent blue screen error...

    Mr President. I suffer with this frequent bluescreen error. My computer restarts automatically after that. I downloaded the zip file information system and the Minidump zip. Please solve this problem. Link to system information: https://SkyDrive.live