Can not burn more files on CD ROM

Similar Questions

• I can not burn the file on a dvd

  I want to save through recovery norton computer and put it on the record. Click on burn, but nothing happens

  Hello

  1. What is the format of the file you are trying to burn?
  2. don't you make changes on the computer before the show?
  3. you receive an error message?
  4. you try to burn using any third-party program?
  You can check the link to burn the files to DVD.
  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD
  
  For the problem with the Norton recovery tool, you may need to contact Norton support.
  See the link for help.
  http://www.Symantec.com/Norton/support/index.jsp

• can not burn internal files and burners exterinal

  cannot burn files

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Windows Media Player will not burn my files!

  Media Player from my window will not burn my files on my blank CD rom. I add what I want in the colum burn and then I click on button (start burning) and try to start burning but 10 seconds later, it ejects my blank CD songs and pop of the screen upward to say that... (Windows media player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.)   Please help me and understand what to do!    Thank you

  Hey Tashina_Jean,

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. Select a recording speed (write) more slow for the CD burner (recorder).

  3. try a different brand of blank discs.

  4. stop all other programs that are running.

  5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  6. defragment your hard drive.

  Links: what please refer:

  To reduce the burn speed:

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  For disk defragmentation.

  Improve performance by defragmenting your hard drive

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Also, see if the Update CD/DVD rom driver.

  For driver updates, see:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After update readers, my cdrom can play music but can not burn a cd

  ORIGINAL TITLE: Windows audio

  Hello...

  WELL, AFTER UPDATING READERS, NOW MY CDROM (2 OF THEM) CAN PLAY MUSIC BUT CAN NOT BURN A CD.

  CAN YOU HELP ME?

  Thank you.

  RESPECTFULLY,.

  JOE.

  Hello

  1. what operating system is installed on the computer?

  2. What is the full and exact error message?

  I suggest to see the link and try to run the fix it:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, please provide more information to help you best.

• can not find script file "c:\". WINDOWS 32\system\system32.db»

  can not find script file "c:\". WINDOWS 32\system\system32.db»

  Hi bushra2000,

  Provide us more information on the issue:

  · You receive this error during the startup process?

  · You receive this error message when you work with an application or a program?

  · You have security software installed on your computer?

  · What is the service pack installed?

  Virus scanner to check that there is no virus or malware on your computer activity. You can check the link for the following online antivirus scan: http://onecare.live.com/site/en-us/default.htm

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Pls help: using Windows DVD (& Vista Home Premium) - can I burn more than a 'slide show' on a single DVD disc?

  I use DVD Maker (& Vista Home Premium).  Can I burn more than one slideshow on a single DVD disc?

  I saved 3 different 'projects', each has 10-15 images.
  When I use the screen 'Add items' to try and add these 3 different projects on my DVD I wind up just with a great slide show, which has 30-40 pictures in.
  What I want on this DVD is a separate slide show for each of the 3 projects.
  So can I implement a Menu of this DVD, which allows me to choose which of the 3 projects (slide shows) that I want to watch?
  Can I do this?  If so, how?
  Thank you!!!

  I use DVD Maker (& Vista Home Premium).  Can I burn more than one slideshow on a single DVD disc?

  I saved 3 different 'projects', each has 10-15 images.

  When I use the screen 'Add items' to try and add these 3 different projects on my DVD I wind up just with a great slide show, which has 30-40 pictures in.

  What I want on this DVD is a separate slide show for each of the 3 projects.

  So can I implement a Menu of this DVD, which allows me to choose which of the 3 projects (slide shows) that I want to watch?

  Can I do this?  If so, how?

  Thank you!!!

  ==========================================
  It's a matter of time.

  Save each project in the. Film WMV format. Then you can import
  the three films in DVD Maker files and each of them will be a chapter...
  This way, you will have a menu.

  Once the DVD-video is encoded you cannot add additional files
  the DVD.

  If you need information on how to save... validate your version of Movie Maker.

• When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  original title: quick search

  When I enter an apostrophe when online, it still shows the quick search box, and then I can not type more

  Hello
  
  1. it occurs when you use a particular application or all applications?
  2 have you tried to use a different keyboard?
  
  Method 1.
  Check what happens when you use the on-screen keyboard. If it works fine here so you can check using another keyboard.
   
   
  Method 2.
  If the problem persists using a keyboard screen ion then run the sfc scan and check.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
   
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "Internet explorer can not open this file or this page.

  __2-so I'm working, suddenly the following problem crosses my path. Told me that "Internet explorer can not open this file or this page. I followed the instructions but nothing happens so I leave and continue on another topic.

  1. when I see "your password is wrong", I'm always sure that this is right PW, so I click OK and it's immediately back 2 or 3 times until I close it and after that I continue to work as if nothing had happened.

  2 - while I'm working I tells me that "knowledge cannot open this page or IIR. I followed the Instructions but nothing happens. So I leave and continue my work on another of the subjects.

  "So I leave and continue my work on other topics.

  You don't say exactly what you are working on.

  Thus, the advice given is for Internet Explorer.

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·    You experience performance issues in Internet Explorer.

  ·    You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·    Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  ·                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also try the Forum from IE:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon

  Mick Murphy - Microsoft partner

• Windows 7 can not find my file?

  Windows 7 can not find my file?

  The folder is synchronized with Google drive

  I could add 'system' of permissions, but this causes permission errorsI is currently seeking 17000 files manually and it's a pain

  Any way to get Windows 7 to find 'xp style' folders on the fly without all these stories of cataloguing which causes has other "cannot find' bugs even when

  Actually found a solution so for all those who use the Googledrive folder on Windows - you can cut search indexing (uses of data which is not updated on the records of Gdrive) causing Win 7 search "on-the-fly" = a little more slow but even faster that I can read names of 17000 files

  Just open your main Gdrive/Windows folder and choose search & Union Options / folders:

  Always search file names... CHECK

  Index of use which... CHECK

  Ok

  

• Can I burn a file that needs 3.5 hours long on a single dvd?

  Can I burn a file that needs 3.5 hours long on a single dvd.  In addition, I don't see the MPEG 1 in first Pro CS6 option.

  Post edited by: Kevin Monahan
  Reason: Title changed to make it more accessible.

  Export MPEG2-DVD and use the 2 files (audio and video) to create a DVD in Encore

  For that length, you will need to write on a DVD double layer

  The body/Encore tutorial list message #3 http://forums.adobe.com/message/2276578 can help, with more help in the #5 message

• Is it true that I can not run more than 60 Hz on screen?

  Is it true that I can not run more than 60 Hz in 640 x 480 on my laptop with nvidia go 7600? or is there a driver for my lcd screen...?

  Why do you want to change the screen on the TFT screen refresh rate?
  LCD monitors do not suffer the same problems as their predecessors of the TRM and the refresh rate does not simply mean the same thing. LCD or TFT monitors will provide excellent quality and resolution at 60 Hz.
  Its response time, brightness of the Image and the Image contrast ratio the most important question for a TFT or LCD monitor.

  Operating systems set the different default refresh rate. Windows 95 and Windows 98 (se) together the highest refresh rate possible. Running Windows NT operating systems such as Windows 2000 and Windows XP descendants, however, by default the value of the for the 60 Hz refresh rate.

• Can not burn the backup of the data on a DVD - RW on the Satellite A100-200

  Hello

  I did a lot of audio and data cd using Nero burning, but can not burn a dvr - rw data backup.

  Advice please.

  Satellite A100-200 and xp home

  What do you mean with data backup?
  And have you tried other DVD discs? I think your drive is compatible with the player so test drive of other manufacturers.

  On the Toshiba laptop I always use verbatim, and I never had any problems with it.

• Windows XP sp3 can not find a file that I know is there

  Windows XP sp3 can not find a file that I know is there. I even copied the file to the desktop, but research still cannot find the file. He may not get indexed. But on a search for *.mp3, it will include this file. I've searched all files and folders, file name or name part and content, but the search is empty.

  The reason why I asked is that this *.mp3 IS a 'partial file name.

  If the file is an MP3 file (music), I doubt if you could ever find by searching for "contained in the file," then relevant chess is why it was not found using the complete file name or part of the name.

  If the file is not hidden, the only other thing I can think is that there is some special characters in the name of the file that is not obvious when you look at it.

  For example, there was quite a "Drunk Philly' in 1974 called hit"when will be I see You Again"by the three degrees. Let's say you have decided to appoint an this (3) .mp3 mp3 file. It would be a legal folder name, but a search for 3º.mp3 won't find it. This is because the name of the file, I used the 'degree' (Unicode 00B 0) symbol and the search string uses the symbol "masculine ordinal' (Unicode 00BA). These symbols are almost identical to the nekkid eye (can not use the actual word here), but not to a computer search engine.

  Replace any part of the name of the file, except the extension using the * wildcard would make the search works, but if you have used the 'partial' name, includes all who is this character, which could cause the problem.

  To test, I suggest renaming the file. See if research there now. If so, rename, go back to what you think it was--but use the keyboard, not copy and paste to get the name of "origin". Search finds now?