can not communcate with dns server (fe80::ec22:2deb:bc09:5 b 66% 10) main help pls (T_T)
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
ProLink Windows xp modem d-link router
C:\Users\acer>ipconfig/all
Windows IP configuration
Name of the host...: PC-acer
Primary Dns suffix...:
Node... type: mixed
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: mshome.net
Ethernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. : domain.name
... Description: Atheros AR8131 PCI - E Gigabit Ethernet Con
Troller
Physical address.... : 00-26-22-56-C5-B0
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. : domain.name
... Description: Atheros AR5B93 wireless network adapter
Physical address.... : 00-17-C4-B0-73-24
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::c051:ac5f:6b0a:8da2% 10 (Preferred)
IPv4 address: 192.168.0.101 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Tuesday, October 18, 2011 17:26:08
End of the lease...: Wednesday, October 19, 2011 17:28:51
... Default gateway. : 192.168.0.1.
DHCP server...: 192.168.0.1.
DHCPv6 IOOKING...: 234887108
DHCPv6 DUID customer...: 00-01-00-01-12-4F-B0-9A-00-17-C4-B0-73-24
DNS servers: fe80::ec22:2deb:bc09:5 b 66% 10
192.168.0.1
NetBIOS over TCP/IP...: enabled
The connection-specific DNS suffix search list:
MSHOME.net
Card tunnel Local Area Connection * 13:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: isatap. {3AB212EB-6850-4 FEB-8873-59B15CA7A
E55}
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Local Area Connection * 11:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 02-00-54-55-4E-01
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Local Area Connection * 19:
State of the media...: Media disconnected
The connection-specific DNS suffix. : domain.name
Description...: isatap.domain.name
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Card tunnel Local Area Connection * 20:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Card 6TO4
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
Hi annelore,.
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1:
(a) to connect to the router (192.168.0.1 or 192.168.1.1 in the address bar type) and log in. Check the user manual or documentation if you don't know the references of logon.
(b) ensure that you are in the configuration, basic configuration category.
(c) (c) defiler scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
(d) enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
(e) use the DNS servers provided by the ISP. There are many DNS servers out there. It is preferable to use the ISP if possible.
(f) scroll down and click on "Save Settings".
Step 2:
(a) click on start and then Control Panel.
(b) go to the networking and sharing Center and then click on change adapter settings.
(c) right click on the connection to the Local network and select Properties.
(d) select Internet Protocol Version 6, and then click Properties.
(e) Obtain DNS server automatically choose an address and press Ok.
automatically an IP f) choose get.
(g) repeat the steps for Internet Protocol version 4 as well.
Method 2: Reset the TCP/IP settings.
Change TCP/IP settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-TCP-IP-settings
Method 3: Follow the steps to clear DNS.
(a) click Start, type cmd in the start search box.
(b) right click and select run as administrator.
(c) type, the following command and press enter
ipconfig/flushdns
For reference:
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233
Tags: Windows
Similar Questions
-
Can not communicate with the server, BUT I CAN CONNECT SUCCESS TO "MANAGE SITES"
I do NOT see the server in dw cs6 files, so I can't download or not communicate with the server, BUT I CAN CONNECT to SUCCESS OF "MANAGE SITES"... EH WELL THERE WHERE THE PROBLEM?
In the view of the file context menu, click Remote Server
-
can not change the dns server, always comes back.
10.10.5 Yosemite
My ISP has provided DNS servers are terrible and I still get messages "site is not reachable. I'd like to change the DNS from Google or Open DNS servers
In SYSTEM preferences > network > DNS tab I delete 2 default entries & entry "8.8.8.8" & "8.8.4.4" (google dns)
In the "areas of research" box, there are 2 entrances & I can't delete them.I click OK & apply - when I go back to the DNS tab, it was the old DNS.
What should do?
May be a corrupt .plist.
Make a backup, preferably 2 backups on 2 separate drives.
Quit the application.
Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J. When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Select the library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist on your desktop.
Restart your computer, open the application and test. If it works fine, delete the plist for the office.
If the application is the same, return the .plist where you got it, crushing the latest.
Thanks to leonie for certain information contained in this.
-
can not connect with the server.
I can't connect to the internet. WI - FI connected and at full power. This just happened and it's never happened before.
Hi, it seems that there is a problem with the connection between your router and the dsl modem. Make sure the pin of the Ethernet cable is plugged correctly in any LAN port available on DSL Modem and on the WLAN port in the Wifi router.
Go to 192.168.0.1, run the installation/quick installation program from this interface and make sure that you preferred DNS address type 192.168.1.1 or default of the DSL Modem ip address if you know it's different.
It is always a good thing to restart both the DSL/ADSL Modem wireless router periodically to refresh the system and you will face less problems like the one you face now. If both modems are enabled for quiet a long time, it can either be hanged or perhaps become hot to damaged. So reboot them once quiet often when not on duty.
Mark as answer if it answers your Question. Mark as helpful if it helped you continuer.* *.
-
Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Unable to send emails, SMPT can not connect to the server
I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.
I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.
Please advice, or guide me what I am doing wrong, or what I can do to fix this error.
Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.
Step 1
In the Mail menu bar, select
▹ Connection Doctor window
In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.
Select the Advanced tab in the settings for the account and check the box marked
Automatically detect and maintain the account settings
If it is not already done.
If there is more than one account of the problem, repeat. Close the window and save the changes.
Step 2
Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.
If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.
Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.
Step 3
Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter
SMTP.gmail.com
Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.
Step 4
If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).
The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.
Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.
If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.
Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.
You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.
Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.
-
I can not connect with the windows Messenger
I can not connect with the windows Messenger
Hello
In which case it's a server problem, you will get a better response in the Live Messenger forum.
My moderator tools cannot transfer messages on the forums of Windows,
Please re - ask your question on the Forum Windows Live http://windowslivehelp.com/
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
in my firewall settign my computer and the printer can not communcate between them hit the wrong button because it was working fine
Flight23,
Run first remove print jobs to remove all blocked the queue print jobs.
Unplug your printer,
Start, Panel, programs and features, your printer, uninstall.
Restart your computer.
Make sure that the printer has been deleted. Driver Manual printer removal
With online computer, insert the floppy disk to the printer and reinstall the printer. You will get a message, the printer is not connected. Connect the printer at the moment (power on)
Don't forget the programs anti-virus and firewall will block communications.
Rick
-
Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW
Hi all
I tried to apply the patch from Jan 2016 to the Weblogic Server that runs the RMS Application.
The version of the Weblogic Server is 10.3.6
The version of RMS App is 13.2.6
While applying the patch that has a PATCH-LIST of S8C2 on the Weblogic Server, I encountered the following error:
[oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install
Checking for conflicts...
Detected A - conflict to solve and run the installation of the patch again
Conflict condition details below:
Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA, EJUW
After reading the forums, I followed the suggestion to delete the previous patch: EJUW and who has obtained successfully removed as shown below, when I tried to install the Patch Jan complained conflict ZLNA patch and when trying to remove the ZLNA encountered unrecognized patch ID patch: ZLNA.
[oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = EJUW-prod_dir = $WLS_HOME/wlserver_10.3
Checking for conflicts...
No conflict detected
Removal of the Patch ID: EJUW...
Result: success
[oracle@test-rms-app bsu] $. /BSU.sh - prod_dir = $WLS_HOME / wlserver_10.3 - patch_download_dir = / home/oracle/2016_JAN_CPU_SPU - patchlist = S8C2-verbose - install
Checking for conflicts...
Detected A - conflict to solve and run the installation of the patch again
Conflict condition details below:
Patch S8C2 is mutually exclusive and can not coexist with the patches: ZLNA
[oracle@test-rms-app bsu] $. /BSU.sh - delete - patchlist = ZLNA-prod_dir = $WLS_HOME/wlserver_10.3
Encountered unrecognized patch ID: ZLNA
Any suggestions how to solve and apply the fix successfully Jan would be useful.
Thank you.
Hello
Can you please set the download directory of the fix for MW_HOME/utils/bsu/cache_dir/with the help of Smart updated interface and test again.
To designate a directory to download the hotfix, follow these steps:
Start the smart update.
On the Smart Update main window, choose file > Preferences.
The Preferences dialog box appears.
In the section Patch download directory of the Preferences dialog box, specify the path to the download patch directory.
https://docs.Oracle.com/CD/E14759_01/doc.32/e14143/start.htm
Thank you
Aishwarya
-
vSphere Client could not connect with the server
Hello
I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.
He keeps fails with the following error message:
VSphere client could not connect with the server {ip address}
Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)
I can ping the server successfully.
Has anyone seen this problem before?
Thank you
for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?
-
Hello
Recently, our ESX sevrers were compliance verified against the
CIS VMware ESX Server 3.x
Reference v1.0
There was a lot of risk found as part of the audit and a remediation plan was given to follow, we did the server seems to work very well except that we can not login with root:
While intermediatery and PuTTY doin, we use the money account to log the SU to root, earleir he was working now it says Incorrect password .
Connection through the root of the Console says Login Incorrect ,
Any help to sort through and understand this issue would be much appreciated
OK, your first screenshot confirmed suggestion 1 will give the ability to su username to root. There is even a custom comment you made, in the file etc/pam.d/su, above the line that I asked you to look: ' Uncomment the next line to allow users in the wheel group are authorized to who are allowed to become root.
1. in this case, just connect to the host with VI client root, go to the users tab and groups, among which the users regular (vmadmin is a certainty) that you are trying to su go, edit the user and add to the wheel group. You should now be able to ssh or console (DRAC) for the ESX host and su (s) specific.
2. Once you are root you can ' cat/etc/securetty' the console and the vc/1, vc2, lines etc. must be missing. The missing lines from you to connect to the consle (DRAC) as root. If you want to keep the sanitation of CIS, you don't have to make other changes, in addition to 1 above.
Let me know if you have any questions.
----
-
Thunderbird does not connect with the server
Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?
Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.
-
I am using Firefox Portable and lack the menu "Extra"since updated to Version 11. And "No, I can not add with the toolbar customization."
What is this extra menu?
In some languages of the menu Tools is called Extra, so you can watch in this menu to see if you can find what you are looking for.
-
Why mackbook Airdrop and bluetooth can not work with iphone 5s?
Hello.
I have a macbook pro late 2011 (os x El Captain) and iPhone 5s version 9.1.2
Question 2:
1. I turn on and correctly configured AirDrop (select all) but Airdrop macbook can't find iPhone 5s.
Why? because my macbook before 2012?
2 - Iphone can not connected with bluetooth macbook.
The first macbook paired iphone / go to the bluetooth menu in mac / iphone / click on to connect to the network
then I see this notification:
the network is unavailable. Make sure that your access is activated.
Please help me
Thank you
1. it's okay.
To send items to an iPhone, iPad or iPod touch, you have a 2012 model or more recent Mac with OS X Yosemite or later version, except the Mac Pro (mid-2012).
Use AirDrop to send the contents of your Mac - Apple Support
2 iPhone Bluetooth is not designed for the transfer of files. You can send the files some other way, such as e-mail, Cloud Computing service or photo stream (for photos).
-
Salvation;
I tried to upgrade my macbook pro OS Yosemite to El Capitan, but I can not proceed with the installation of EL Capitan after downloaded because my ID Administration Apple not accepted even if correct password entry.
By navigating through ' assistance from Apple is in charge to retrieve the Apple ID, I deleted the keychain, now the problem is I can't add the new keychain.
Please help as I am now hung the message not found "Login" keychain... then reappear.
Thank you
Mel
Okay, so you didn't get very far in the installation.
Here's how to reset a forgotten password.
Do you have a backup before the upgrade, such as a time Machine backup? (Keychain is not containing the administrative password, unfortunately.) You remove the login keychain, all stored passwords in Safari and in fact be lost.) If you have, I would recover the set of connection from there.
If you don't have a current backup, it's the first think you get.
There could be a problem with the disk or of protection structure, or with the disc itself. Creating a new keychain cannot be blocked, short error permissions or a drive problem. Disk utility and check the drive and see if there is something to do. (Unfortunately, some of these steps require an administrative password.) You can try the repairs or a backup to disk by booting from the recovery partition - that won't require no administrative privileges - and attempt a repair or recovery from here, or save the entire drive disk external work.
You have another Mac around, where certain tools can be generated and can then be used here?
Maybe you are looking for
-
I managed to download the video by going to the options/info/media in version 41 page, but the video no longer appears in the list. This is the case for pages where I could download the video only 2 weeks ago. I tried to update my addons, but that ma
-
I created a shortcut on the desktop to go to: http://www.24hGold.com/English/gold_silver_prices_charts.aspx?money=AUSD & p = money When I double click on the shortcut, the following message is displayed: Windows cannot find 'http://www.24hgold.com/en
-
my screen chat IM in Yahoo stopped opening mail box works in internet explore
When I open Yahoo and go to my e mail there is a place that tell me which contacts are available and I use just click here name one IM box would appear now, nothing happens. I've been with the support of teak with yahoo and I tried to go through the
-
After updating Firefox now works at 100% of CPU cycles, weighs on the Web page loads
Update from Firefox to 7.0.1 version, is now posted on the Web pages, CPU to 100% use. Disabled addons, cleared cache, reloaded version once again. Always at 100%.
-
Please help I have tried everything I know which I admit is limited!
I have 2 toshiba computers laptops one vista 7 in the other window. Recently, my wireless connection went down (AOL) on two laptops and they sent a new router (huawei echolife). My windows 7 to connect s easily, but one of vista will not > I got it r