Can not connect to internet "page cannot be displayed".

I just do a restore of the system on a gateway using Windows XP.  When I click on Internet Explorer it says "the page cannot be displayed" I went to control panel connections, network & internet, create the new connection.  It shows a map of the connected network.  I tried to create a new connection, but it does not.  Help!

HI Maria,

You will need to have downloaded it from other computers and install it. Note your computer model and make sure you visit the manufacturing site (Dell/HP/Ausu /...) and choose your model number. Download the related drivers for network card and copy to a flash drive, connect it to the pc and install the drivers.

Tags: Windows

Similar Questions

  • Internet page cannot be displayed/cannot can not find server or DNS error

    I have a new hard drive and cannot connect to the Internet (page cannot be displayed error / cannot find server or DNS error).  Operating system XP and Internet Explorer v6.  I tried without success to create a new network connection.  The only network connection listed is a 1394 connection.  Under Options, LAN settings is set to automatic detection. The firewall is disabled.

    Hello Barbrab

    You must install the network drivers for this system that you did a clean install of windows. After installing the driver, find the network connection. Let me know if it helps.

  • Help CC can not connect to internet

    All my apps updated CC and my CC very well, Connection Manager works BUT help in ANY CC request said it can not connect to internet. I would like to press F1 or click Help instead of having to open another browser window and google my question all the time.

    Hello

    Please see the link: cloud creative activation and troubleshooting of sign-in

    Hope that helps!


    Kind regards

    Sheena

  • Satellite L500 - clicking IE "internet page cannot be displayed" appears

    When I click on the internet Explorer icon 'internet page cannot be displayed' error message appears.

    I have to use the 64-bit internet explore to use internet.
    I also have problems to download Skype.

    These problems are related?
    Why internet will not work using the icon of internet explore?

    Please notify. Thanks in advance for your help.

    Hello

    The message "internet page cannot be displayed" appears because there is no internet connection!
    You must first check if the laptop is properly connected to the internet!

    LAN and WLan connection.

    You can also use the Firefox browser instead of Internet Explorer but if id not available internet connection, then the firefox browser does not display anything like IE too.

  • I can not connect to the page member ESPN.

    Original title: Windows 8

    I am trying to connect to my Member ESPN page, I am told that I can not connect because the cookies must be enabled. Then, I went to internet and active options cookies for a higher medium setting and then a framework to accept all cookies. Both still did not connect.

    Have you tried all the other links provided?

    See if another program, maybe Anti Virus or other program of type safety, interfere with your access.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/default.aspx/KB/929135

  • After that the virus can not connect to internet

    My computer running Windows XP has been infected by a virus 'Alert system' fake who took over the office and hide all my files. I was able to restart in safe mode, run Malwarebytes and Microsoft Security Essentials to capture and remove some viruses. I was also able to display most of my files and desktop programs. (I also tried to do a system restore, but this doesn't seem to work). However, I can not connect to the INternet using Internet Explorer. I reset IE, but I can't always connect. It seems that IE starts to open the URL, but is then blocked somehow by the virus, which redirects to the default "diagnose the problem. The cables are connected and the Internet works. What other options are bypassing them that blocking and/or resettlement of IE.

    The error you received seems to indicate that there is a need to reset Winsock.  You could try running the FixIt program contained in this article, or the manual procedure:

    "How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP, and in Windows Vista"
      <>http://support.Microsoft.com/kb/811259 >

    HTH,
    JW

  • can not connect to internet with Quest DSL. Quest DSL support said that the NETWORK adapter is missing

    Original title: can not connect to the internet on a desktop computer Windows XP Prof

    I try to use your older desktop with Windows XP Prof  I use Quest with an ADSL connection and that you have a wireless connection to a laptop.  The office is not wireless. I connected the cable earthnet and quest tell me that I don't have "NIC" on my device manager.  Anyone know how I can receive and install on a computer without internet connection?  Thank you

    L E K, I'm sorry, but I don't know the answers to the other questions. After you enable the NIC, can you check your service manual for an explanation of the other choices? Maybe someone else can answer these questions. Liz.

  • I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

    I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

    I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

    If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

  • After windows update yesterday I can not connect to internet

    I can't connect to Internet after update last night. This happened last week too. Last week, I disabled the norton firewall and was able to connect. This week it does not work. When you try to connect to the database's data/program it states: could not connect to the database server. Please check that you have a working internet connection and that the application is configured correctly.

    Hello Carise,.

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the issue.

    This problem can occur either because of corrupt network drivers or incorrect network settings.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the network troubleshooting and check.
    Reference:
    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Tecra M5: Can not access the internet pages, but can ping in cmd.exe

    Hi all, this is confusing to me.

    I've been happily connected to my WLAN for more than a year without any problems. I recently updated my drivers for the following on my Tecra M5:

    -Intel Pro Wireless adapt
    -Drivers audio Sigmatel
    -nVidia graphics card

    Now, after facilities, everything was fine. However, a few days later, I turned on the laptop and went to IE7 and it cannot display the web page (my homepage is www.google.co.uk). I called my ISP to help and they reported problems on the service, and they gave me the www.google.co.uk ip address I got a response of in cmd.exe. It seems that I can get out on the internet but I can't access the Web pages - it could be a DNS issue?

    I have disabled my A - V and firewall and tried but get the same question. I also tried to restore the PC back more than a month and it did not help either. I'd appreciate any help that anyone can give.

    I also plugged the laptop directly into the router using an ethernet cable, so it's not only a wireless issue either.

    I have installed any other software at all at the moment and the only other thing that got my attention, it's that, in the field of restoration, there a lot of system restore points, which I wasn't expecting to see in the last month. But it could be a Kipper.

    Thank you very much

    MARC

    Hello

    According to your message, you are not able to connect to internet via LAN and WLan. Is this good?

    Well, in your case I would first check the router settings and re still.
    In addition, you must reset the router.

    Usually, the router assigns the IP address, and therefore you would just plug the laptop LAN cable and then should be able to connect to the internet.
    Please note that the TCP/IP protocol settings must be set to automatic.

    Check everything first!

  • 13 - CL stream HP 110nr laptop: I can not connect to internet unless I'm right next to the router.

    I can't connect to the internet, unless I'm on top of the router. I walk 2 feet or less away and I lose my internet connection. I got the internet company come and check my router, I even got a new. It still does not connect.

    I have not had this computer for a year! It is useless unless I can connect to the internet.

    Can someone help me please!

    Thank you.

    Check the driver for the wireless communication update or uninstall the driver from Device Manager and download from hp.com

    See you soon

  • Qosmio F30: Can not connect to internet with WiFi safely

    I recently purchaced a Toshiba Qosmio F30 laptop and have spent the better part of two days trying to connect to wireless internet. After constantly call Wanadoo (my provider) and accusing them for all this, I thought that the laptop itself is at fault.

    What happens is when I try to enter my network key (WEP), default is a different key that I can't see that it's all in the points! This continues to be and im am totally unable to enter my network key. Until it is I turn off security on my livebox thingy and connect unsecurely and as I live in close proximity apartments, other people can and probably will connect to my internet, and I am also told that makes me more at risk of viruses and other.

    I apologize for my lack of technical jargon, and that I can not give a more descriptive... uh... description, but I'm just a beginner and not the most in computer science.

    Any help would be appreciated more!... Why is nothing simpler!

    Hi Luke,.
    Have you tried WAP (shared key) instead of WEP.
    In this way, you will need to make your own key instead of having the it generated by the router.
    It is also safer.

    To do this, you must enter the settings of your router (usually http://192.168.1.1 or http://192.168.0.1), enter the password provided by Wanadoo, then click Security. Change the setting WEP WAP (or shared key) and enter a 10digit password then you will need to enter it again when your computer tries to connect to the router again.

    It is best to use a wired connection to change settings, then disconnect the cable and wireless.
    If you notice that you are connected wireless to the router, and your internet connection is dead, temporarily disable the LAN (reactivate when you are satisfied with your connection works). This would happen if your computer includes your wireless network connection to other computers and the wired connection like you internet connection (even if there is no wire connected).

    It is also important to change the administrator name and password to access your router (this would prevent your neighbors children playing to change your settings).
    Let me know if you have more problems.

  • Satellite M305D-s4831 - I can not connect to internet

    Model - Satellite M305-S4831 (brought to the black Friday)

    Problem: I simply restart my laptop, and I can't go on the internet.
    My modem and router that a sharuter works very well, the connection between my PC to the router is good, but can not go on the internet.
    I went to the network and sharing Center, and the windows network diagnostics stipulate that:

    "" www.microsoft.com"is not configured to establish a connection on port"World Wide Web (HTTP) service"with this computer."

    I used the Toshiba recovery media disk (included when I brought my laptop) to restart my laptop.

    > My modem and router that a sharuter works very well, the connection between my PC to the router is good, but can not go on the internet.

    You have configured the router with the data from your ISP (internet service provider)?
    Without the right data you come out not and will not be able to reach all of the Web sites.

    But if the router is configured correctly, then this could be a problem with your firewall software or its configuration.

    I also read that different Anti Virus software may cause this problem, especially if you use different tools. A guy has had this problem, because it used the Norton Internet Security and Kaspesky. The two applications were not compatible and have blurred the internet configuration.

    By the way; have you tried to connect via LAN or WLan? Check both!

    Here you can also find some interesting and useful Microsoft documents:
    How to troubleshoot Internet Explorer 7 in Windows Vista:
    http://support.Microsoft.com/kb/936215

    How to optimize or reset Internet Explorer 7:
    http://support.Microsoft.com/kb/936213

  • I can not connect to internet links in my e-mail or links in other programs as well.

    It started with Windows Mail, but now I click on a link any. If I click on a link, Internet Explore rises, but cannot connect. I either get a screen problem saying to spell correctly or a window takes me to documents choose an execution file. I tried to reset Explorer and looked everywhere I can to connect to the options.

    It started with Windows Mail, but now I click on a link any. If I click on a link, Internet Explore rises, but cannot connect. I either get a screen problem saying to spell correctly or a window takes me to documents choose an execution file. I tried to reset Explorer and looked everywhere I can to connect to the options.

    I presume you checked if your IE is set as the default program, and he has all his faults?
    Start > default programs > Set Your Default programs...

    t-4-2

  • WRT610N wireless can not connect to internet

    I have a WRT610Nv1. It worked perfectly for about a year until my internet whent out. I have reset my modem and the router and one day more late my wireless connection could not connect to the internet. I can connect to my wireless router, but I can't do it to the interenet. However, if I use a wired connection, I can connect to the internet. I have tried power cycling, releasing the ip - IP, MAC address, change the beacon interval, fragmentation & rts threshold, change the ip address of the router, encryption, disable my firewall, disabling of cloning to renew the upgrade of the firmware.

    I even bought a new WRT610Nv2 and had the same problem. I spent four hours on the phone with support linksys technique, and they couldn't help. Only, they went through the basics and everything I had already tried. I call the comcast tech support, and they say it's a problem of router and they can't help me.

    I have comcast cable with a modem of the RCA, a Dell XP laptop.

    Ethernet wireless network connection card:

    The connection-specific DNS suffix. : hsd1.ca.comcast.net

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IP address...: 192.168.2.100

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. :

    DHCP server...: 192.168.2.1.

    DNS servers...: 192.168.1.1.

    68.87.76.182

    68.87.78.134

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. : hsd1.ca.comcast.net

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IP address...: 192.168.2.101

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. : 192.168.2.1.

    DHCP server...: 192.168.2.1.

    DNS servers...: 192.168.2.1.

    68.87.76.182

    68.87.78.134

    Any help would be greatly appreciated.

    Finally! I copied the MAC address of my wireless card and manually put in the MAC address clone. This does not work, then I went back and clicked on the 'Clone MAC from my PC' button (which I had already done a dozen times before). After ten days, I guess the stars were aligned and the network gods were looking down on me because he suddenly started working.

    So I'm crazy and tried to restart my laptop, and it still works. So for fear of messing with anything now, but I'm going to live dangerously and turn on encryption.

    Thanks to all those who have offered support.

Maybe you are looking for