Can not deploy the build Q10

Similar Questions

• Can not deploy the project to the server...

  From the servers, it seems not a problem only a warning. But I can't deploy the soa on the server application.
  
  
  17:02:17 problem by sending the HTTP request on the server. Check the standard HTTP response code for 502
  17:02:17 error deployment archive sca_firstComposite_rev1.0.jar to soa_server1 zjwang - cn.cn.oracle.com:8001
  17:02:17 returned HTTP 502 error code
  17:02:17 that no error message is returned by the server.
  17:02:17 # incomplete deployment. ####
  17:02:17 error deployment archive file:/D:/SOA/samples/soa-infra/end-to-end/end2end-101-SOA-composite/end2end-101-SOA-composite/project/SOA-first-composite/firstComposite/deploy/sca_firstComposite_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

  Can you check the following:
  1. parameters of the proxy in your JDeveloper.

  2. If your SOA server is hosted on a multi-hosted (System with multiple IP addresses), and then set the address of the listening of your servers to one of the ip address that is accessible from the machine running the jdev.

  For multihomed computers:
  To get this thing working, follow these steps:
  The customer jdev machine you ping your server, it will give you an IP address.

  Now to connect to your WLS administration Console. Select AdminServer. In the General configuration, set the listen to this IP address. Do the same for your SOA managed server. Now restart the servers. Try the JDev client deployment. It will work.

  You can also paste exceptions in your soa server logs?

• Vision project of OR can not find the model after migrating to labview.

  Hello
  My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.

  
  

• After copying a machine a host for another vspehere vsphere virtual machine I can not load the VM machine upwards. Can't open the Flash "hard" or one of the disks disk that this depends on

  Here is the error msg I get from vsphere client.

  Cannot open the Flash '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk' or one of the disks disk that it depends on.

  The system cannot find the specified file

  VMware ESX can not find the virtual disk '/vmfs/volumes/52120f68-3f09e8f0-affd-f01fafcf18af/w2k3SE-base-20101005/Windows w2k3.vmdk '. Check that the path is valid and try again.

  I have ssh client due to vmware ESX.

  ls # vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple

  564d73b4-7443-6b7f-9a70-cd355ad76d3b.vmem Windows XP Professional.vmx.0 Windows w2k3 - s004.vmdk Windows w2k3 - vmware - 16.log s009.vmdk

  Windows XP Professional - 24367b9b.hlog Windows XP Professional.vmxf Windows w2k3 - s005.vmdk Windows w2k3.vmdk vmware - 17.log

  Windows XP Professional.nvram Windows w2k3 - s001.vmdk Windows w2k3 - s006.vmdk hiding vmware - 18.log

  Windows XP Professional.vmsd Windows w2k3 - s002.vmdk Windows w2k3 - 14.log - vmware vmware - 19.log s007.vmdk

  Windows XP Professional.vmx Windows w2k3 - s003.vmdk Windows w2k3 - vmware - 15.log vmware.log s008.vmdk

  It seems that all the files are there. Except that there are some spaces.

  / vmfs/volumes/52120f68-3f09e8f0-AFFD-f01fafcf18af/Apple # cat "Windows w2k3.vmdk".

  # Disk DescriptorFile

  version = 1

  Encoding = "windows-1252".

  CID = 97c834c1

  parentCID = ffffffff

  isNativeSnapshot = 'no '.

  createType = "twoGbMaxExtentSparse.

  # Description of the measure

  RW 4192256 CLAIRSEMES "Windows w2k3 - s001.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s002.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s003.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s004.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s005.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s006.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s007.vmdk.

  RW 4192256 CLAIRSEMES "Windows w2k3 - s008.vmdk.

  RW 16384 SPARSE "Windows w2k3 - s009.vmdk.

  # The database disk

  #DDB

  ddb.virtualHWVersion = "7".

  DDB. UUID = "60 00 C2 91 86 bb a5 - 5 c bc 28 89 75 01 c9 b0 e1"

  DDB. Geometry.Cylinders = "16383.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = 'ide '.

  ddb.toolsVersion = "8228.

  ddb.longContentID = "9d219dcc524591ac1095297d97c834c1".

  and here's a copy of the vmware.log file

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-STRING: "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk ': cannot open (the system cannot find the specified file).

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s001.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s002.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s003.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s004.vmdk ": closed.

  2014-08-14 T 19: 01:56.925Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s005.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s006.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s007.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s008.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-VMFS: ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3 - s009.vmdk ": closed.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: DISKLIB-LIB: can't open ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' with flags 0xa, the system cannot find the specified file (25).

  2014-08-14 T 19: 01:56.926Z | VMX | I120: Msg_Post: error

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.fileNotFound] VMware ESX can not find the virtual disk "/ vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk» Check that the path is valid and try again.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disklib.FILENOTFOUND] the system cannot find the specified file

  2014-08-14 T 19: 01:56.926Z | VMX | I120: [msg.disk.noBackEnd] cannot open disk ' / vmfs/volumes/52120f68-3f09e8f0-conf-f01fafcf18af/apple/Windows w2k3.vmdk' or one of the snapshot disks it depends on.

  2014-08-14 T 19: 01:56.926Z | VMX | I120: ----------------------------------------

  2014-08-14 T 19: 01:56.939Z | VMX | I120: DISC: discs of opening had 24 ms.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: Module DiskEarly market failed.

  2014-08-14 T 19: 01:56.939Z | VMX | I120: VMX_PowerOn: ModuleTable_PowerOn = 0

  2014-08-14 T 19: 01:56.942Z | VMX | I120: WORKER: asyncOps = 1 maxActiveOps = 1 maxPending = 0 maxCompleted = 0

  2014-08-14 T 19: 01:56.950Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 0 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3909]: error VIX_E_FAIL in VMAutomation_ReportPowerOpFinished(): unknown error

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Vix: [12787513 mainDispatch.c:3870]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0

  2014-08-14 T 19: 01:56.951Z | VMX | I120: Past vmx/execState/val of poweredOff

  2014-08-14 T 19: 01:56.952Z | VMX | I120: VMIOP: output

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:861]: VMAutomation_LateShutdown()

  2014-08-14 T 19: 01:56.956Z | VMX | I120: Vix: [12787513 mainDispatch.c:811]: VMAutomationCloseListenerSocket. Close the socket of the receiver.

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VMX VMDB Flushing connections

  2014-08-14 T 19: 01:56.957Z | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"

  2014-08-14 T 19: 01:56.957Z | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)

  2014-08-14 T 19: 01:56.961Z | VMX | I120: Exit VMX (0).

  2014-08-14 T 19: 01:56.961Z | VMX | I120: AIOMGR-S: o stat = 1 r = 3 w = 0 I = 0 br = 49152 bw = 0

  2014-08-14 T 19: 01:56.961Z | VMX | I120: OBJLIB-LIB: ObjLib cleaning done.

  2014-08-14 T 19: 01:56.961Z | VMX | W110: VMX has left the building: 0.

  Assuming that you have enough free disk space on the host ESXI 5.1 data store, I suggest you that you load the multiextent module as shown in the link, I posted and then clone the virtual disk using the vmkfstools command line utility.

  vmkfstools 'Windows w2k3.vmdk'-i 'clone.vmdk' slim-d - an ide

  vmkfstools EI 'Windows w2k3.vmdk' 'old.vmdk '.

  vmkfstools EI "clone.vmdk" "Windows w2k3.vmdk".

  The first line of the clones of the virtual disk in a virtual drive put in service end format, and the following two lines renaming virtual disks, so that you can delete the "old*.vmdk" files once the VM works as expected.

  Alternatively, you can also run the commands on the host ESXi 4.1 and then copy the new files hard again to avoid loading the multiextent module in the new host.

  André

• Can I deploy the same virtual machine to VMWare Player running of several PCs without network problems

  Hi all

  I am a newbie so please forgive if this is a stupid question...

  Can I deploy the same virtual machine (XP Pro), with the same machine name and the same GUID for several machines on a network without going through issues such as errors of names duplicate etc. Or will I sysprep prior to deployment.  If so, is there an easier way to do it?

  Not sure if this is important, but I need to use Bridged networking due to problems with our personal firewall.

  You will need to deal with the dupe GUID. Sysprep is a method.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Can Notes show the number of records with each folder?

  Can Notes show the number of records with each folder?

  No it can't. It would be nice tho.

• Can not find the downloaded file

  I regularly download files, and they will 'always' in the same directory. Now, I downloaded fedora-live-workstation-i686-22-3.iso
  of https://getfedora.org/en/workstation/download/and (a) I didn't get the usual "save/open" Download dialog and (b) I can not find the downloaded file. The < downloads - tools > FF screen displays the file as downloaded, but not (AFAICT) where he was placed.

  Any clarification would be appreciated. Thank you.

  (OP) Well, I downloaded the same file again and this time everything went as it should. For example, some of my 'facts' above must be wrong, but I don't know who. I suspect some personal deficiencies.

• why I can not get the same apps I have on my iPad?

  why I can not get the same apps I have on my iPad?

  Because they are different versions for different operating systems.

• Can not verify the account to download the free app Always get "Session Timed Out" message.

  Can not verify the account to download for free enter or just about always "Session Timed Out" message.

  Please describe in more detail what you are doing, and when it fails.

  Do you use any type of VPN or RAM to access resources outside of your region?

  Are you connected to WiFi when you do?

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Why I can not get the Norton Toolbar? In the menu, the add ons, extensions, it says Norton toolbar is inconsistent &amp; disabled.

  I can not get the norton for 36 firefox toolbar. Have run Norton live update repeatedly. He updated of all good and applied a patch. When I go to the firefox menu > Modules > extensions, toolbar Norton is grayed out and says he is not compatible with firefox 36 and is disabled. Help! I need my Norton safe.

  Hi Cathie7372, according to Norton the latest version of the toolbar is compatible with firefox 36 is 2014.7.10.26 - your watch as 2014.7.10. 16...

  as norton distributes the updates themselves we are probably not able to help much - please contact norton support if you do not receive the last update, even after running liveupdate repeatedly. they should be able to help get their product to date.

• My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  My account is migrated to a new server, so I had to recreate the same account in Thunderbird, but I can not delete the old one - they appear together now.

  If there is no email from the old account that you want to keep, move them in local directories first.
  Tools > accounts settings
  OR
  Right click on the email account in the fodler pane, and then select "settings".

  Select the account you want to delete.
  Click on "Actions account."
  Select 'delete account '.
  Click OK

  See the image as an aid:

• Firefox 34.0.5 cannot print correctly. I checked all the pages on firefox problems and still can not solve the problem.

  I use 34.0.5 with Windows 7 and that you cannot print correctly. In print preview, it appears in a label size. I double checked all my settings in firefox and my preferences from the printer, I checked all the pages on firefox problems and still can not solve the problem.

  I was able to finally solve the problem, but I had to do a complete reset of firefox. Thank you for your time.

• Lack the profile can not access the Profile Manager, cannot be continued

  Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...

  I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.

  In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
  • http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
  • < User > /users//Library/Application Support/Firefox/profiles.ini

  See also:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc