can not detect the iphone after upgrading 12.5.1.21

Set to update to the latest version of itunes (12.5.1.21) and now itunes does not detect my iphone.  tried to remove the lockdown folder. tried to restart all devices.

Windows 10 with all updates installed. Someone at - it suggestions?

If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
    It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
    C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the alternate build Download iTunes for Windows (64-bit-for older video cards) , which is sometimes a useful workaround.

Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you're back 12.5.1.21 to 12.4.3.1 or 12.4.2.4, for example, then you will also need to restore the database of the library using the method described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

TT2

Tags: iTunes

Similar Questions

  • I can't activate my iphone after upgrading to ios9.3

    I can't activate my iphone after upgrading to ios9.3

    How did you get the update

  • Audio input Inspiron 15 3000 can not detect the headset

    Audio input Inspiron 15 3000 can not detect the headset, but audio dell can detect something trendy. However, the playback sound device cannot detect any helmet. Now I only get gurgling in the helmet. How to solve this problem?

    Hello. To test the headphone switch the native Windows audio driver Realtek audio driver.

    1. open Device Manager (type devmgmt.msc in the box of Windows search).
    2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    3 Select this option to "Update driver software".
    4. click on "Browse my computer for driver software".
    5. click on "Let Me pick from a list of drivers on my computer".
    6. put the "Show compatible hardware" check box if not already checked.
    7. in the list of devices, click on 'High Definition Audio"(native driver).
    8. click on "next".
    9. in the update driver warning box, click 'Yes' (the driver).
    10 restart the portable computer if you are prompted. If not invited, so no need to restart.
    [To return to the Realtek driver, do it again but reverse the names in steps 1-6.]

    If it is still bubbling even with the native driver, test by using other headphones. If still no luck then probably hardware failure. Contact technical support for warranty repair.

    If it works fine with the native driver, then the Realtek driver is buggy. Try a different version of the driver. If you need help with this answer comes back with the full model name (something like "Inspiron 11 3147", etc.) and which operating system there.

  • How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

    How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

    Hello

    You can download the Photoshop CS 6 from the below mentioned link.

    Download Creative Suite 6 applications

    Thank you

  • Vision project of OR can not find the model after migrating to labview.

    Hello
    My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.


  • Wireless can not detect the connection my TP Link router (SSID)

    Hello

    I bought Pavilion G4 - 1346tx Notebook PC last Sunday(15/04/2012).

    Since then, it cannot detect/find my ssid from my router. any other device inside the House can detect and connect. only my laptop cant. My Wifi card model: Broadcom 4313GN 1 x 1 adapter Wifi 802.11b/g/n

    I tried to change my router mode and etc2, always without prevail. I downloaded the driver with the latest version (5.100.82.82 of the HP website) that the previous stock (not sure which version) are still not.

    Please help me with this. I read two or three theme with the same problem and the solution, but the solution link is broken or can not find the driver. Help me ~ ~ ~

    Thank you. Appreciate the help...

    Solved in Paul_Tikkanen to:

    WiFi problem solved

  • LabVIEW can not detect the network drive so that other applications can.

    All network drives are mapped correctly and another application such as micro soft office or windows explore can see the correct mapping LabVIEW can not see the mapping? No idea how to solve this problem?

    -VS

    The solution: Add EnabledLinkedConnections to the registry

    https://TechNet.Microsoft.com/en-us/library/ee844140 (v = ws.10) .aspx

  • Notes, do not sync on the iPhone after upgrade

    After upgrading to IOS10.0.2 on iPhone no matter who has experienced problems with Notes is no longer sync with other devices?

    Hi jimbjazz57,

    I understand that, after the update your iPhone to iOS 10, you had some problems with your notes, do not sync with other devices. I know it's important to have your information available on any device you use, so I'm happy to help you.

    If use you iCloud for synchronize your notes, and then connect to iCloud.com and see if your notes are sync to iCloud at all.

    We want to, on your iPhone, make sure you create notes in the right folder. Open the Notes app, and then tap left arrow in the upper left corner of the app. Make sure that you have the appropriate folder selected here when entering new tickets.

    If your notes are not yet the timing, we will try to switch your Notes and turn it back on. To make this opening settings > iCloud. Disable notes, restart your iPhone, and then turn on again them.

    Thank you for using communities Support from Apple. See you soon!

  • vISTA can NOT DETECT THE READER of CD/DVD,

    WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?

    Thank you

    Hello

    Code 39 means that the driver is corrupted or missing.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • iTunes is not detect the iPhone

    All first of all sorry if this has been posted in the wrong place!

    I have recently upgraded to Windows 10 and since then, itunes was not able to detect my iphone. I've also recently updated itunes and my iphone so everything is up-to-date, just thought that I would mention that.

    I have redownloaded and reinstalled the program, updated the drivers on my computer as well as restarted my computer and the program several times. This made me think my phone was the problem, but my computer detect it and I could access the folders.

    I tried to plug my phone into my moms Apple computer and itunes has detected my phone. So, is it because I have upgraded to Windows 10 or is it my phone?

    I don't really know what it is or how to fix this, so any help is appreciated!

    Try to restart the AMDS > restart the Apple Mobile Device (AMDS) Service on Windows - Apple Support

  • C855 satellite can not boot from battery after upgrading W8-W10 Home >

    Hi all

    I have a problem really strang after upgrade my C855 Satellite of Windows 8 to 10 of windows. After the upgrade, I can't boot my system of battery only. With the adapter, I had no poblem.

    I bought a new battery, but it still had the same problem. Cannot start system battery only.

    The following steps, I was

    • Got the latest Bios Update
    • Used a new battery
    • Do the powerless laptop (detach battery and adapter) and hold the power button for 15-20 seonds. After that return battery and adapter
    • Do seals in my power, parameters of balanced energy vice versa

    Is there anyone who has had the same problem or can advise me?

    Thanks in advance for the help

    Hi Repairlab

    You are not alone. I currently have a C50 Sat with exactly the same problem, with the exception of the upgrade. My problem started before I upgraded to 10. Like you, I can start with the battery and using taking current, but which is rubbish for a laptop.
    I didn't upgrade the bios but the laptop does not recognize when the battery is connected and the bios update tool continues to ask for it (VERY annoying ToshIba if you already read your forums).
    I was trawl through these forums looking for a solution, but there are 0 replies on the vast majority of positions. Not even ToshIba engineers seem to have a presence.

    In any case, did you ever solved the problem, and if so can you please share?

    Thank you.

  • T450 not DETECT 2nd screen after upgrade Win10

    I upgraded today to win 8.1 to Win10. My T450 has a second screen (Dell, about 5-6 years) connected via a docking station Thinkpad USB. Second screen worked well under 8.1, but now it is not detected. I've improved the display drivers (graphics are Intel 5500) and Bios but no joy so far.

    Any help much appreciated!

    Sorted! Solution has been updated to the drivers for the USB docking station, can be found here:

    https://support.Lenovo.com/us/en/documents/pd028106

  • Easy transfer gets "Can not open the file" after update from XP to 7

    In Windows XP Sp3, I created the Windows Easy Transfer file on a USB - I see it. I did the Custom installation of Windows 7 that seems successful. When I try to access my data using file transfer, the program will not open the file, although he sees there. Is there a way to retrieve this file?
    I saw similar posts but have not found one with an answer yet.
    Thank you

    Agrivated after myself, I found the problem.  And it's simple!  I hope it works for everyone, always in need of response.  So I upgraded to Win Xp 32 bit to 7 64 bit.  I had a 39 + GB Easy Transfer file.  I was getting the same error, «...» "Cannot open a file... "Well, to solve this problem, I opened the Transfer Wizard, thenm go through your files, using the options"Advanced"and my limited to a size of transfer to 2 GB or less.  It could be a tedious job, but it should work for you, as it did for me.  You can experiment a bit more with the measures, but I've just stuck with 2 GB and was fine.  Good luck to you all

  • BlackBerry smartphones can not install new applications after upgrade to version 5

    Since I downloaded something like "Blackberry OS version 5" on the web and updated my device using the Desktop Manager, I was able to download new applications.

    I managed to get the BBM on - the phone would have been useless if not - but no more applications will be downloaded.

    Everything seems to work, if I download via the web, or use the Desktop Manager to install applications, there are no mistakes and he said it worked - but there is no icon of the application in a folder.

    For example, BB app world: says Office Manager installed, but it is not accessible, because there is no icon anywhere.

    My carrier say they can not me more help because it is a question of device.

    I got "view all", as well as the icons are certainly not hidden.

    I've tried dozens of times battery pull.

    I tried a backup using Desktop Manager, then factory reset the device, and then restored - several times.

    I tried to uninstall applications through Desktop Manager and install them again.

    I don't understand what the settings are meant to be changed after I do a factory reset and restore from a backup.

    Carrier: Orange

    Device: 8900

    Platform: 4.3.0.23

    App version: 5.0.0.90 (91)

    File: 113507146

    Is it possible version 5 does not work with Orange?

    After the "Orange UK" link on this page, I see Orange lists v5 for download: http://blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads

    What is the link between these things:

    http://www.BlackBerryFAQ.com/index.php/How_do_I_downgrade_the_OS_on_my_BlackBerry%3F

    * office for PC Manager software

    * the platform as shown on the device

    * the version of the application as indicated on the device

    I just updated to Version 5, tonight and had the same problem.  I went to the BB mobile site and there is an upgrade to AppWorld available - Version 2.0.0.36 once I downloaded, installed and rebooted, the icon was back and working.  Hope that helps!

  • Computer can not detect the printer so that connected via USB

    My computer runs on Windows 7 Professional and my printer is model # D110a.

    My printer has worked fine since I got it, but a few weeks ago, my computer has been infected by a virus that forced me to reformat and reinstall everything. I installed the necessary software from the installation CD supplied with the printer, but when I try to connect my printer through the 'Add Device' option in the Configuration menu, my computer does not detect even if the printer is on and physically connected by a USB cable.

    Help please, I don't have the money to buy a new printer.

    No problem. Just glad that you solved. Can you go ahead and mark this as resolved to close issue? Thank you.

Maybe you are looking for

  • small problem with the printer dialog box

    I recently added a Brother printer to my IMac and ran into a minor problem.  When I put in place using my WiFi and AirPrint, the dialog box has a convenient box for the black and white that I was able to check in one easy-to-replace step and just pri

  • Flash/Zoom works - how can I recover the shortcuts?

    Hello It happened to me to remove the "Toshiba" folder in the Start Menu: file is displayed twice in the Start - Menu I click right and press 'remove' - all two has disappeared... :( Now, I thought that only the shortcuts have been removed, but I am

  • 15 - p030nr: kidnapping 15-p030nr Dvd Player

    I am trying to remove the dvd drive of my hp beats special edition 15-p030nr because there is a screw under the drive that I have to remove so that I can remove the keyboard

  • Compaq Presario jumper CMOS reset position CQ5110Y?

    My Presario CQ5110Y primer not. The power supply, cpu and case fans all came. I have no POSTAL codes or response of BIOS of any kind. It happened when I turned the computer on in the morning. It was closed properly the day before evening. I replaced

  • Impossible to wake mode 'sleep' correctly and the screen goes on the side

    Original title: display problem Whenever my laptop Dell Inspiron sleeps, my screen or display goes on the side. I learned that I can solve this problem by pressing the F1 key and selecting the extend option. However, this happens whenever I disconnec