can not find printer to computer hp officejet pro L7780 all-in-one

I recently tried to print and my printer can not be found that I don't have the disk that's come with the printer, it is lost and he always tells me that it cannot find a printer

What operating system?

Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang=

What did he say?

Tags: HP Printers

Similar Questions

  • Installation of the HP Officejet Pro L7780 all-in-One

    HP Officejet Pro L7780 all-in-One

    Windows 7 64 bit

    Hi, I have downloaded software from HP in order to install my printer. For some reason any installation fails and I would really like to help. Step by step of my installation procedure->

    I run the program "to add a series of all-in-one Officejet Pro unit

    I chose the wireless connection

    The program runs and find a printer 'Officejet Pro L7700' I select it and click Next

    He runs the installation for 5-10 seconds, and then it says that the printer was not complete.

    I ran the install several times (also after restart the printer and the computer) moved always

    The connection of printers is configured properly, to the best of my knowledge.

    It also print documents computer wireless. My problem is that I can't scan a document to your computer. When I choose the scan of the computer, it tells me that there is no scanning settings.

    I have no idea what to do...

    Hi RazorkillerC,

    You can scan from the HP software successfully?

    1. open the Solution Center, and then select settings

    2. select scan settings

    3. delete the shortcuts on the right side

    4. click on the device to update, and then close the scan window

    5. open again the scan window

    6. add shortcuts on the left side to the right side

    7. click on the device to update

    8. try scan from the front panel of the printer

  • OfficeJet Pro 8100: Can not find the driver for the Officejet Pro 8100 online

    I've recently updated to Win10 (the free update, I do not know how many bits). I also then changed my wireless carrier. Now my laptop is not connecting to the new hub, and it seems that there is no driver more - so I don't know if these changes are the problem, or one of them.

    I tried to install a new driver and I first started the process, but the printer not print report pages, and then the laptop don't would not recognize the USB cable, even though it had been plugged in all the time. I tried to remove the cable and reinsert; also turning the printer market, but cela did not work.

    I also have Virgin and with them her reset the hub, but the hub still not connect to the printer.

    Now when I go to the page of drivers hp and it identifies my product, it then tells me there is no drivers for this printer now, and I should come back later in case they are developing.

    I can't believe that this is true. Can you please give me a link to a page where I can find and install the driver?

    May also explain why the cable USB is not recognized?

    Thank you.

    For your convinence: driver HP Officejet Pro 8100 that supports Windows 10

    Last updated driver, click on "Support" tab above and "drivers software &" or just google.

  • OfficeJet pro L7780 all-in-one: full functionality of the driver and the software crashes to configure product.

    Windows Home Premium 64 bit operating system. Download full feature software and driver and follow the installation instructions. All software and drivers seemed to install but at the last stage (configure the product), it crashes after a few minutes and a fatal exception message (no error number). After this, uninstall all the software.  I took the following troubleshooting steps:

    Disabled all the normal startup items and services (except Microsoft) in MSCONFIG. As an administrator, and under Vista compatibility also led installation.  In addition, tried a basic installation.  My computer is a Dell PHE 8500 and is wireless. I tried installing several times in respect of the connection of the USB cable directly and wireless, but all had the same result. Completed all the steps except the last where the fatal error message appears after a few minutes.  Help

    Thought I would give it another chance: I've done the following:

    Ran L4uninstall.bat

    American ran Care System: registry clean and disk cleanup

    Connected accessories/tools disk cleaning system

    Restarted

    Insured that lates version of Adobe Flash Player has been installed

    Latest version of the software downloaded to the printer

    Went into MSCONFIG unchecked load startup under selected startup items checked "Hide all Microsoft Services" and disabled the rest of services under services,

    Restarted

    A ran another check of the register with the American healthcare system

    Ran disk clean again

    Off DSL modem

    Firewall and AntiVirus disabled Norton

    Restarted

    At installation of the printer as follows: first of all installed drivers

    Restarted

    A ran the remaining printer one by one with Solution Center last softerware

    Restarted

    Is surprised that Solution Center has worked without problem

  • How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    Have you looked at the site of Canon?

  • HP Officejet Pro L7680 All - in - One will not print black

    Original title: HP Officejet Pro L7680 All - in - One

    I started my printer and it won't print in black.  Don't copy in black no more.  Test page does not work and the color works very well.  I changed all the cartridges, so it isn't the ink... No idea what is the problem?  He served 6 months off and disconnected.

    Hello

    This forum is for comments on the Forums for answers and you should ask at your
    questions in the Windows Forums for answers corresponding to your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    It also helps us to help you if all the useful information.

    How to ask a question
    http://support.Microsoft.com/kb/555375

    ==============================================

    In this case you should check with HP Support, their documentation online and drivers,
    and ask questions about known issues in the forums of HP.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

  • My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

    My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

    Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

  • I have an Officejet Pro L7580 all-in-one. How do you find the printer did how many copies?

    I have an Officejet Pro L7580 all-in-one.  How do I know how many copies the machine made?

    Dragon-fur (unusual name!)

    Thanks again for your suggestions, which led me to the answer.

    Looking more closely at the options in the HP Solution Center, which I thought I had already exhausted, I followed these links - settings, print settings, the Toolbox for printer, information, reviews, myprintmileage, source, which led me to the total number of pages, number of total jobs and many other information, which, apparently, is monitored by HP.

    Thanks for the clues get me there.

    Kind regards

    Tony

  • OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

    I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

    Hello

    Sorry, but the printer is not supported on Windows Vista 64-bit.

    64-bit support is only available in Windows 7 or later operating systems.

    You can find the printer specs below:

    Vista 64-bit is not supported.

    http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

    You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

    Respect,

    Shlomi

  • OfficeJet Pro 8600 all-in-One connected as network printer loses connection

    In December 2011, I bought a HP Officejet Pro 8600 all-in-One to replace an Officejet 6500 as my network printer home. The 6500 worked very well on my cable, but his screen did not, I tried some of the features offered by the 8600 and I got a good price on a new warehouse of BJ. I have the 8600 connected via ethernet (not wireless), with a static IP address. All my computers on the network are running Windows XP Pro SP3 and are up-to-date with Microsoft updates. However, from one day to the next my 8600 will lose connectivity scan (Scan of the computer shows it as being disabled on all my computers at the same time, and I can't reconnect), and if I do not have anything he'll (as in a few hours) also lose connectivity impression. The only way to restore connectivity is to uninstall the HP Officejet Pro 8600 device software basis of all computers, and then reinstall the printer. I had a phone conversation and two debates with HP Technical Support; They suggested that the problem is in the firewall on the computers (but if that were the case I don't think that the loss of connectivity would occur on all computers at the same time), the IP address setting (doesn't make sense) and the printer driver is not not the latest version. I tried all the suggestions, and none of them have solved the problem. The last counselor "has raised the issue to the next level", which proved to be a Manager with no technical expertise and his only suggestion was that I have to return the printer to the merchant. I think the problem is the firmware in the printer (which, according to the 'update' on the printer option, is the latest version). Any other suggestions or experience?

    After a lot of research and find the settings that I did not know that Windows XP offered, I found that the following appear to have solved the problem I've known - at least the printer is now operational for more than 48 hours without losing printing or scan connection. Here are the steps I used:

    1. Start Control Panel  connections network and Internet

    2. Choose "network connections."

    3. Right click on "connect to the Local network.

    4. Choose "Properties".

    5. In the top window is the name of the Ethernet computer connection port, select "Configure" next to this window

    6. Select the tab labeled 'Power Management'

    7. Uncheck the box "allow the computer to turn off this device to save power".

    8. Select the "Advanced" tab

    9. Select the entry "power saving Mode".

    10. If this entry is set to change 'On' to 'Off '.

    11. Select 'OK', and then close the windows that were opened

  • Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

    Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

    I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

    I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

    The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

    I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

    Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

  • HP Officejet Pro 8600 All in one – elbows / folds document

    I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

    I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

    I have the same problem, but just behind the box!
    IT IS SHAMEFUL! The printer is practically unusable!

    Sometimes it shredded paper!

    The printer driver is also very basic, compared to Canon for example.
    On top of that, it does not save the changes to your settings,
    We have to bury in the HP software!

    Also, the printer is unable to make a copy without border.

    And last but not least the printing quality is very poor.
    my printer Canon does better printed with generic ink...

    It is also large and noisy.

    I completely regret my purchase.
    I can't even sell it now as it's deffective.

  • Ugh! Frustrated... can not find printer email address!

    Just bought the HP Photosmart C309G for my mom's birthday. I just put it in place with the exception of the eprint. I sat here for almost 3 hours and CAN NOT find the e-mail address of printers. I went to eprintcenter.com and follow the instructions to go under settings on the front panel, then the parameters without wire/Web. Well, for starters, it is not a 'settings' on the front panel, it says "setup" and number WHERE I can find something that indicates the parameters without wire/Web. I also followed this.

    • The printer code/email may be claimed or added to your HPePrintCenter account 24 hours after it is printed on the printer. If this time has expired, you must re - print the fact sheet from your printer Panel to reset the period claimed. Do this using the menu on your front panel of the printer (under Web Services settings / wireless). »

    Nothing helps! Someone please tell me how to set this cigarette in terms that can understand a blonde! Please write me at [email protected]

    NanasHP01 wrote:

    Just bought the HP Photosmart C309G for my mom's birthday. I just put it in place with the exception of the eprint. I sat here for almost 3 hours and CAN NOT find the e-mail address of printers. I went to eprintcenter.com and follow the instructions to go under settings on the front panel, then the parameters without wire/Web. Well, for starters, it is not a 'settings' on the front panel, it says "setup" and number WHERE I can find something that indicates the parameters without wire/Web. I also followed this.

    • The printer code/email may be claimed or added to your HPePrintCenter account 24 hours after it is printed on the printer. If this time has expired, you must re - print the fact sheet from your printer Panel to reset the period claimed. Do this using the menu on your front panel of the printer (under Web Services settings / wireless). »
    • Nothing helps! Someone please tell me how to set this cigarette in terms that can understand a blonde! Please write me at [email protected]

      http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/eprint-supported-printers/TD-p/351574

      NanasHP01 - See the thread at the link above - the C309G does not support ePrint.

  • I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

    I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

    Hello WillieBouma1,

    You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Can not find the updated driver for Intel PRO Wireless LAN 2100 3B for R40

    I can't find the good updated software listed for my R40 on the Lenovo site. The Device Manager shows my card wireless as:
    Intel PRO Wireless LAN 2100 3B Mini PCI Adapter but I can not find the model listed in the update list.

    My R40 description is by Lenovo site is:
    Product: ThinkPad R40 2897 B4U
    Operating system: Windows XP

    Original description: P M 1.4 GHz, 256 MB RAM, 40 GB 4200 RPM drive HARD, XGA(1024x768) 15 TFT LCD, 32 MB ATI Radeon 7500, 24x10x24x/8 x CD-RW/DVD, Intel 802. 11B wireless (MPCI), Modem (CDC), 10/100 Ethernet (LOM), UltraNav, Secure Chip (TCPA), IEEE 1394, 8-cell Li-ion, WinXP Pro

    Lenovo driver update page, I have the following choices:

    Network: R40, R40e wireless
    (1) mini PCI driver of cisco Wireless LAN

    (2) high rate Wireless LAN Mini-PCI Adapter III
    Note: The models ThinkPad R40 2681, 2682, 2683

    (3) dual-Band 802.11ab and 802.11abg wireless LAN Mini PCI adapt

    (4) Intel PRO/Wireless LAN 2100 3B Mini PCI adapt
    Note: The models ThinkPad R40 2722, 2724 only, 2723

    My card is listed for models 2722 2723 and 2724 ONLY.

    Here is the direct link to the driver page http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46024R40.

    Device Manager shows that I currently have the Intel of the installed driver version: 07/03/2003, version 1.1.5.0

    Can anyone help on what version of the software update I should use?

    Welcome to the forum!

    Here is your wireless driver:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-59438

    After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanint

    I hope this helps.

Maybe you are looking for