Can not find the ftp on services.msc service?

Similar Questions

• M712 repetitive image problem. Can not find the page for service with the official RULE

  I have to review the manuals online here and I googled for them as well.

  Nobody seems to have an official repetitive image for the M712 default rule page.

  My impressions can repeat the points that occur each 1.75 "or 44 mm.

  Looking at an older manual for a different model of printer, a HP 5100, this repetitive error indicates a Toner Cartridge primary charging roller.

  Since most of these parts are internal to the toner cartridge, I've already replaced a new cartridge of HP brand. No help.

  Most replaced suspect parts with a kit of maint merger, no help.

  I can assume either us:

  -a got a refurb had somehow HP ink cartridge or

  -a got another somehow cartidge PROBLEM or

  -the charge roller is NOT located within this model of printer toner cartridge and my roll charge elsewhere in the printer

  Someone at - it all pages of repetitive image rule for this prnter model?

  Thanks in advance.

  Test for half. Place a sheet of paper in the manual feeder on the right side and perform a self-test. When the rear edge of the paper into the printer, quickly open the toner door to stop printing. Remove the toner cartridge and look at the picture without fuse below. If the fault is present, it is still the toner and nothing else. If the defect is not present, then the question is fuser. Run a menu card and see if she has a routine cleanup of page and if it does not work there. If this is not the case, the fuser unit will probably be replaced.

• Pavilion 550 - 032L: network (Ethernet, wireless), PCI, BCM43142A0 can not find the driver for win7 64 bit

  Wireless 802.11b/g/n LAN featuring single-band (2.4 Ghz), 1 x 1 technology

  Ethernet LAN: Realtek RTL8151GH-CG

  PCI and BCM43142A0 of Palivion HP 550 - 032L

  Can not find the driver for OS: Windows 7-64 bit!

  Help me, please!

  Hello

  Please try:

  Wireless:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_135105_1

  Wired (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71102.exe

  Kind regards.

• Deinstitutionalized drive, my computer can not find the music stored on the internal drive

  I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money.  The drive works fine.  I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty.  It saves space, but sees ALL files.  Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill.  Any help would be wonderful.  I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.

  My guess is, it is a question of USB MSC - MTP mode.

  Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes.  This is located under settings of the player.  (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.)  Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode.  And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files.  If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine.  If, however, you change mode, emits a "invisibility".  And if you're ready auto detection, the computer can change the modes on you without you knowing.

  And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.

  And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.

• listener_scan1 could not find the name of service

  Hi all

  I installed 11203 on 2 node RAC cluster. I created 1 listener to scan. When I give lsnrctl status LISTENER_SCAN1, I get the below error

  AMT-01101: could not find the name of service LISTENER_SCAN1

  Please, give your suggestions and help on this issue.

  Thank you

  NR

  Hello

  Try configuring the tnsnames.ora in this format and let me know

  If you use load balancing, try

  TBESTDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node1_vip))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node2_vip))

  (LOAD_BALANCE = yes)

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = TBESTDB)

  )

  )

  And you can add below if you want to connect to a specific instance

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac1-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac1)

  )

  )

  RAC2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac2-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac2)

  )

  )

  Note: Replace the SID, Servicename, hostname, port etc depending on your environment and also ensure that the tnsnames.ora should be in an appropriate format (for example: the opening and closing should be in the right order.) If you add an extra space further it will throw error..)

  Kind regards

  Pradeep. V

• Software DB can not find the installation 11r2 on Win2008r2 grid

  Hello
  
  
  I try to install RAC DB on a single node on:
  Win2008 R2
  Ora11g R2
  
  After successful grid install (as admin) I run the installation of the DB software and it says: INS-35354.
  OracleASMService + ASM, OracleOHService, OracleOraCrs11g_home2TNSListener services: are started!
  The path of the cmd is set: PATH=c:\app\administrator\product\11.2.0\grid\bin
  
  but he says - it can not find the grid software!
  
  I tried to restart the machine with nothing doesn't. I uninstalled it and installed again in 2nd directory different but still useless.
  
  What is special measures should be taken to prepare the system? (however successfully passes test grid installation phase).
  I use http://download.oracle.com/docs/cd/E11882_01/install.112/e18069/toc.htm
  
  Published by: g777 on 2011-01-11 11:22

  Salvation;

  "" I belive you can get a faster response on Forum home ' Grid Computing ' RAC, ASM & Clusterware Installation part forum

  Respect of
  HELIOS

• Can not find the server/problem loading page

  I've made a few changes to a CFC that caused it not to compile. When I tried to access my web application it gave me the error as planned CF, pointing to my invalid code. I commented on the service out and reloaded my app. When I tried to view it in the browser, I'm greeted by an error can not find the server. What disturbs me is that I am able to access other web applications without an error cannot find the server in the browser. Does anyone know why an application would cause an error of cannot find the server and not others? I hope this is clear :) Any help would be greatly appreciated.

  Apparently I WASN'T looking to another web application, but a prototype html that the browser displays because he had no tags CF. The problem is that somehow the CF Server service was not working. It works... problem solved.

• I can not find the method in this interface!

  Is a service interface and query method in the following scripts? But I can not find the method of query in this interface. What is the function of new?
  Map map = service.query (new FreeMemAgent(), null);
  
  Thank you
  
  Published by: jetq on June 7, 2009 21:05

  Hi Frank,.

  the service is a reference variable refers to an instance of a class that implements the query() method that returns a reference to an instance of a class that implements the map interface If service to refer to an instance of a class that implements the InvocationService interface, you can find consistency method 3.4.2 documentation at InvocationService. The new keyword is a Java operator that creates an object. Using the hypothesis according to which the service refers to an instance of a class that implements the InvocationService interface, the class FreeMemAgent must implement the given interface. A reference to a 'new' FreeMemAgent object is delegated to the query() method.

  Kind regards

  Harv

• Can not find the downloaded file

  I regularly download files, and they will 'always' in the same directory. Now, I downloaded fedora-live-workstation-i686-22-3.iso
  of https://getfedora.org/en/workstation/download/and (a) I didn't get the usual "save/open" Download dialog and (b) I can not find the downloaded file. The < downloads - tools > FF screen displays the file as downloaded, but not (AFAICT) where he was placed.

  Any clarification would be appreciated. Thank you.

  (OP) Well, I downloaded the same file again and this time everything went as it should. For example, some of my 'facts' above must be wrong, but I don't know who. I suspect some personal deficiencies.

• Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .

• can not find the sleep settings screen on ubuntu 11.10

  can not find the sleep settings screen in ubuntu 11.10

  http://UbuntuForums.org/

• Can not find the program to burn DVD

  I used to burn and copy DVD, XP operating system. Now I can not find the program to do.
  Hope that I explain ok

  Thank you
  not mind too much techno

  Hey,.

  What program do you mean exactly?
  Nero or what else?

  For burning and copying of discs, I can recommend that the freeware CD Burner XP tools. It of really small and fast tool, never had any problems with it.

  Check this box!

• HP Pavilion g6-1310ea: can not find the ethernet controller driver

  I reinstalled Windows on my HP Pavilion g6 - 1310ea and can not find the drivers for the Ethernet, PCI Device and SM Bus controller controller. There seems to be no more this kind of drivers on hp suupp.

  Hello:

  I can't even to the driver page.

  Here are the drivers you must however...

  Ethernet controller: download and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  PCI device: Download, unzip and run the exe file to install from the first item on the list at the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  SMBus Controller: This is not on the driver page even if it worked...

  I zipped and attached to the driver that you are interested in below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click the controller smbus who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC.

• Can not find the driver for my Satellite M40X-161 WLAN

  Hello

  I have a problem, I have the new system installed on my laptop - windows xp and I can't find a CD with drivers. I tried to download the drivers from the internet, but can not find the drivers for my laptop. I am looking for the drivers for the wireless card and it is not on Toshiba s page.

  There are only drivers for windows vista - I tried, but it did not work. The other problem is that I don't know is my wireless card. At the back of my laptop it has the info that I have peripheral radio ar5bmb-43, but I can not find the drivers for this device.

  Can someone help me to find drivers?
  Thanks in advance

  Unfortunately I wasn't able to find out what WLAN card is inside, but it must be Atheros or Intel, so I recommend you try to install the two drivers for Windows XP Home edition.

  Two of them you can find on http://aps2.toshiba-tro.de/wlan/?page=downloads Portal Toshiba WLAN
  Try to install Windows XP Home version for Atheros 9.2.0.419.0 or Windows XP Home version 9.0.4.39 for Intel.

  Please post comments.