Can not format the memory card

Similar Questions

• An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

  Original title: peripheral equipment

  An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

  Thanks for your help.
  Christine.

  Hi Stefano,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the SD card is damaged or the card reader may not work properly.

  1. What is the brand and model of the SD memory card?

  2. What is the number of the model of the Packard Bell laptop?

  3. you receive an error code or the message after inserting the SD card into your laptop?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you tried to insert different SD card in your laptop?

  6. have you checked the SD card in another computer?

  7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

  8. is the specific question to a SD card or any type of cards?

  9. are you able to detect the SD card in the Device Manager?

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  For reference:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Moto Q does not recognize the memory card

  I just added a 2 GB memory card that is approved for the Moto Q 9 M... For some reason, my phone does not recognize the memory card. In the memory section it shows the card is unknown.

  With a previous discussion, I saw, I did add the memory card on my PC. It does not recognize the card... Any ideas?

  Thank you

  Jason

  Try formatting the card on your pc and then install it on the phone. If it's 2 GB sandisk it should work fine. If the phone or the card is left. Sometimes reformat card strives to set everything right.

• How can I unlock the memory card?

  How can I unlock the memory card?

  Dawn WInans

  Thank you very much. So happy you showed a picture on how to unlock the memory card. I've tried it & it worked. The photo has really helped. I found the protecter in the camera slider tab & not on the actual memory card. But thanks to your very detailed picture, I got it

• Unable to format the memory card, I get the message "windows could not format.

  Original title: car micro sd problem
  
  Hello
  my laptop detects the memory card (after a good dose of refreshing it), but whenever I try to open it or scan or format, any area 'my computer' freezes. and, now my phone displays the message "no inserted memory card. I use a dell inspiron 1525 with windows vista sp2 with 3 GB of ram and and 230 GB hard drive.
  to get you in the loop, the songs on my memory card using previously to disappear on their own or used to go corrupt, so I decided to scan it. now, when I insert in my lappy, im facing this new problem. kindly helppppppppp me.
  PS - after several attempts, I had the option to put in shape, but after clicking on the option, I get the message "windows could not format.

  Hello

  You are able to use any other memory card with no problems on the same computer?

  Try to format it on another computer and check. If you are unable to format it on another computer then it is perhaps because of the corrupted memory card. You will need to contact the manufacturer for assistance.

• COMPUTER DOES NOT RECOGNIZE THE MEMORY CARD

  WHEN I INSERT THE MEMORY CARD INTO THE COMPUTER NOTHING NOT SE PAST AND IT DOES NOT APPEAR IN MY COMPUTER SO I NEED TO KNOW IF ITS A SETTING OR A DRIVER OR IF ITS THE SLOT IN HIS CAR?

  WHEN I INSERT THE MEMORY CARD INTO THE COMPUTER NOTHING NOT SE PAST AND IT DOES NOT APPEAR IN MY COMPUTER SO I NEED TO KNOW IF ITS A SETTING OR A DRIVER OR IF ITS THE SLOT IN HIS CAR?

  ============================
  This card worked previously on this system?

  Certainly could be hardware related... other
  cards work on your system? This card works
  on other systems?

  Perhaps the card is not compatible with your system.
  For example, it can be a SDHC memory card.

  Perhaps the following links will enlighten us:

  Availability of the Windows Vista Secure Digital (SD) Rollup package
  http://support.Microsoft.com/kb/936825

  SDHC (Secure Digital High Capacity) memory card FAQ
  http://www.supermediastore.com/SDHC-memory-card-secure-digital-high-capacity-FAQ.html

  Good luck. John Inzer - MS - MVP - digital media experience

• PC can not recognize the wireless card

  Hello. I have a Presario CQ60-205EZ running vista home basic 32. I had virus problems and had to format and reinstall vista. I used vista (Home premium 32) friend dvd with my product key. Everything is fine, but now, the computer does not recognize the wireless card. It does not list in the Device Manager (I think it's in the other devices section) and I tried to download some drivers from the hp site and apply them here but they do not work. I even tried to go into the bios, but I found no option to deal with it. I suspect that miss me a pilot but which and how to apply it? Can anyone help please? Thank you!

  It works!

  Thank you very much, this forum is great!

  Best regards

  Jorge

• Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

  Hello

  I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

  Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

  Thanks for any advice.

  Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

  Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

  To close, but I thought a few times.

• Palm Centro - Verizon - does not recognize the memory card

  I have the new Palm Centro from Verizon.  Had several problems with the pda and now with the memory card.  I have a Sandisk micro sd 512 MB card.  It works on my old phone and motorcycle in the slot on the computer, but the phone emits no beep when it is inserted and the menu says no 'no card inserted '.  I don't have another card to try right now.  Have I not a bad phone unit?

  Help, please.

  See my response above.

  WyreNut

  Message relates to: Centro (AT & T)

• Can not remove the memory stick slot on Satellite A series card reader

  I hava inserted a memory sony stick into the slot of the card and can not read or retrieve it from the slot.

  I need to disassemble the machine to remove or is there an easier way?

  Thanks for the brief info;

• T2i can not format the card

  I used this card several times. I copied the files on my computer properly. When I put the card in the camera to format and turn on the camera, it says "No card in the camera" all my other cards work fine. I can still read the map with my card reader.

  How can I fix this card? Because the camera does not recognize that there is a car in the slot, I can't reformat the card in the camera.

  Have you tried to format it on your computer & card reader? If this does not work, I would recommend replacement before you have important pictures on it & can't get back them. The cards are not that expensive these days.

• iMac can not read the Sony card with card reader

  Whenever I try to read the connection via the USB port on the card using a Sony memory card reader I get the following error: the disk you inserted was not readable by this computer. If I plug the device via USB, I can read the card. Do I need a special card reader to read a Sony card?

  It is possible that you are using an old map player that maybe isn't compatible with the new card. The SD card has evolved over the years, and if you try to use a new card with a former card reader, you can get this kind of message.

• G2 355 J0Y60E #ABV: I can not install the graphics card on my PC

  I can NOT INSTALL GRAPHIC CARD DRIVER ON MY LABTOP I USING WINDOWS 7 PROFESSIONAL x 64 AND I HAVE ALREADY DOWNLOD THE DRIVER for MY COMPUTER PORTABLE IT STILL NOT WORKING AND
  Thank you..

  What is the error message you get when you try to install the driver?

  You have downloaded the correct driver for your graphics card? The correct driver for your laptop is mentioned in the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = da & CC = DK & DLC = da & sw_lang = & Product = 5353028 #N6506

  Please download the softpaq and try to install this. (In case you can not install this in normal mode, try to start in safe mode (by pressing F10 during during the boot process and select "safe mode") and then check if you can install the driver.)

  You can also download and install the latest version of the BIOS from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6886537 & swItemId = ob_135192_1 & swEnvOid = 4059

  This should help.

  If you still have problems, please post your error message here.

• laptop does not recognize the memory card

  ORIGINAL TITLE: Olympus FE - 310 digital camera

  I put my memory card in my laptop but the laptop is not picking up any ideas?

  On Sunday, April 8, 2012 19:48:06 + 0000, helensnaddon wrote:

  I put my memory card in my laptop but the laptop is not picking up any ideas?

  Is your card, an SD card? There is 4 GB or more? If so this is a SDHC card.
  and it is possible that your laptop drive only reads SD regular
  cards, not SDHC ones.

  Ken Blake, Microsoft MVP

• Cannot find the product key and can not use the gift cards to buy Windows 7 from retail store

  Original title: Let Down by Microsoft Retail store

  My daughter lives and breathes on his pc. We had some tough times lately, and of course, his computer has had too many problems. In February of this year, I bought a Win 7 Home Premium for his pc. Since we moved, so I can't find the package with the product key, or the disc. I have $75 in gift cards from Microsoft, I need to buy new win 7 hp. Almost all retailers (in store and online) competitive price a new copy for about $119. We have been saving, and with gift cards, I would have just enough money to buy win 7 hp for my daughter. I went to our Microsoft store in the Mall. (Don't forget I saved for about 6 weeks, we are on a budget, then gift cards have been a miracle!) Guess what? The only place that I can use the maps from Microsoft wants $199.99. To add insult to injury - I can't use gift cards for purchases in line-HELP! We waited 2 months just to be left out... I am very disappointed by Microsoft.
  I thought that we recorded our product with Microsoft when it was originally installed, but cannot find anyone. All solutions?

  If you have purchased windows is installed a keyfinder allows you to recover your product key.

  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm
  I think that the price of $119 is to upgrade xp/vista to windows 7.
  the $199 price is for the full version.