Can not get audio driver working under WXP SP3 on the Satellite A200 - 1 P 8

Similar Questions

• can not get audio to work do not know if I have all the necessary drivers

  think I need more audio drivers. I hope you can help

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not find update driver for NVIDIA GeForce Go 7300 on Satellite A200 - 14 d

  Hello

  I can't find the driver for my graphics card update...

  Hello

  What driver do you need? A graphic driver XP or Vista?
  Have you checked the nVidia page?

  You will find graphic drivers of the GeForce 7 series

• can not get my program works as I changed my account

  can not get my program works as I changed my account

  Please visit: Adobe ID, login and account help

  If doesn't allow it. Please contact support:

  Contact the customer service

  I hope this helps.

  Concerning

  Megha Rawat

• Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  I am a novice and I do not talk about the web, so please excuse my ignorance!

  I content on my web pages in Muse design that descends below the visible window, but when I go to preview in browser, it only presents a preview which is visible in my window. Of course, I can press command + /, but I should be able to use my mouse wheel or my scroll bar to see the lowest content. I just can't understand how do! Is this something to do with the positions of Master Page header footer? They all look fine and normal and all the other sites I've done. In ADDITION, I checked non paged area (Mount table), and there is NO hidden content.

  I tried to move my content down (to 'wrong' it to enable vertical scrolling). I tried to move my foot higher than the content, but all useless page.

  Preview in browser = will just not scroll down.

  Hope it's a simple solution. Thanks in advance.

  See you soon,.

  I had the same problem and it took me almost 2 days to find a solution.

  See if that solves your problem (if all goes well it has been resolved since you posted).

  1. in the model Master, click on Page > Page Properties > metadata

  2. remove the small piece of code next to the body tag-{overflow-y: hidden}

  3. click on OK, then get an overview of your pages.

  

• Satellite L650 - can not find audio driver for Win XP

  I have a Toshiba Satellite L650 and one can not find a driver of his work for Win XP.
  Not even on the official site, the drivers do not work...
  He said no soundcard found

  Please install drivers.
  What should I do? THX

  Hello

  What L650-xxx you have exactly?
  The European driver Toshiba offer page two different drivers audio; Driver audio Conexant and ATI driver sound.

  Please check exactly the sound card, and then use the right and proper sound driver.

  PS: Make sure that Win XP is up to date! You must install all patches, service packs and hotfixes before installing the audio driver.

  Welcome them

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• Satellite 1670 CDS - can not find audio driver Windows XP Home edition

  Hello

  I can't find drivers for satellite 1670 running Windows XP.
  The sound chip is CS4281, but is more recent that I can find for Windows 98.
  Thank you.

  Post edited by: 76021374

  Hello

  Specification of the reading for this Satellite specifications and I really wonder you want to install the operating system Windows XP Home edition on it. First of all this laptop is about 7 years old and I really do believe that the WXP can work well with this low hardware configuration.

  Secondly, this phone is not supported for Windows XP Home edition and because of that Toshiba has never offered drivers for this good old classic. If you can't find a driver on the manufacturer directly, I'm afraid there is not much to do.

• How can I get audio to work with Windows 7?

  I just reinstalled by copy of first 4 Elements in a new machine running Windows 7. There is no sound when I play the old avi with sound files or if I capture new video with sound. How can I fix?

  Running Windows 7 64 bit in mode 32-bit will probably not solve the problem. Windows 7 automatically slides when even in 32-bit compatibility mode when you run 32-bit programs. The biggest problem is that if your 64-bit audio drivers are compatible with the program.

  Then all first, make sure you have the latest audio drivers. If your computer uses the RealTek drivers, visit the RealTek website and get the latest series of pilot hi-def audio.

  When this is done, we will focus only on the DV - AVI captured from your miniDV via FireWire. Your other reviews may have other issues. You say you can play them in Media Player and they sound but in Premiere Elements they do not?

  If Yes, go to the first Edition items menu and select Preferences / Audio material. Click ASIO settings button and then make sure that the ASIO settings are correct for your speaker configuration.

• How can I get FSX for work under Windows 7?

  I just loaded Windows 7 after 4 1/2 hours.  I can't get Flight Simulator x to work with Windows 7.  The program loads (very slowly) and then hang up as if it is moving in super slow motion.

  Hello rcrayton, welcome.

  Looks like possible problems with your graphics drivers. What is the brand and model of your computer?

  Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not get sound to work since the reload of Windows Vista

  Original title: my computer crasheds had to reload Windows Vista. dowloadeds the disk windows drivers. still no sound. all say sound card diagnostics works

  my computer crashed. HADS reloads of windows Vista. I downloaded the audio driver of windows disk, still no sound. all say sound card diagnostics works

  Try to download the drivers on the support site for your computer manufacturer. You will need to provide the model number of your computer.

• How can I get FF to work with organizing Mod (for the mods used with ARE: Skyrim)? I get an error message that it cannot understand the given address.

  I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
  The address was not included
  Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
  You may need to install additional software to open this address.

  The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.

  Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!

  Thank you in advance!

  In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .

  • http://www.nexusmods.com/Skyrim/mods/modmanager/

  Problems with this program to third parties, please see the support forum:

  • http://forums.nexusmods.com/index.php?/forum/1413-NMM-code-development-chat

• I can not get internet explore and Microsoft word to stop the launch at startup.

  I looked at through these programs and autorun boot are not listed.  I checked the configuration and that they are not and I checked AVG and they do not appear as startup items.  They are not in my Start menu.  How can I get these programs STOP opening on startup?  I don't even use internet Explorer - I simply downloaded it once and now it keeps opening.  I used Word once of many weeks ago, and now it opens each time.  How can I stop this from happening?

  Hello Sarah133,

  In addition to the information that Amara has provided, please look at the suggestions below.

  You can check the boot in a few places by using MSCONFIG.
  ·       Click Start on your desktop
  ·       Type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  ·       Go to the Startup tab. There are options to enable all or disable all or you can uncheck a particular program.
  Check if WinWord is set to run at startup, if so, then uncheck the box.
  Now, restart the computer and see if the word appears at the start of your computer.

  You can also check the registry to see if it is set to run at startup.
  Go to the Start button.
  In the start search, type Regedit.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Please make a backup of ther registry before making any changes. Or you can create a system restore point.

  Now, you place the following keys.
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\RunOnce

  Hkey_current_user\\software\\microsoft\\windows\\currentversion\\run
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Runonce

  If the word is in the list, then delete this registry entry only.

  If please reply back and let us know if this helps with your question.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry smartphones can not get Yahoo to work...

  Can someone please help me get on Yahoo.  When I go on Yahoo.com, the site returns but tabs for mail, weather, etc. do not work.  I don't know what I did differently last night, but I came across a Web of Yahoo site that appeared to be meant for PDA / smartphones, but now I can't figure out how to get there again.  I was able to access all my mail, check the weather, read news, etc. etc.  Of course, I'd appreciate any help on this.

  pinzpilot wrote:
  Can someone please help me get on Yahoo.  When I go on Yahoo.com, the site returns but tabs for mail, weather, etc. do not work.  I don't know what I did differently last night, but I came across a Web of Yahoo site that appeared to be meant for PDA / smartphones, but now I can't figure out how to get there again.  I was able to access all my mail, check the weather, read news, etc. etc.  Of course, I'd appreciate any help on this.

  You can get mobile yahoo and not the entire desktop.

• Can not get BAM icommand working to export my Dataobject object and report

  Hello
  
  Using Oracle SOA Suite 11.1.1.5 on Linux
  
  I am new to BAM.
  
  I want to migrate my data object and report to a new environment.
  
  But I can't the icommand interface to work it seems to me that the icommand interface is not available.
  
  There is no BAMICommandConfig.xml - I can only find BAMCommonConfig.xml in /applications/oracle-bam_11.1.1/config/BAMCommonConfig.xml
  
  Said Oracle documentation I can find the BAMICommandConfig.xml of the following path, but I can't find this file:
  
  The BAMICommandConfig.xml file is located in WLS_HOME/user_projects/domains/base_domain/config/fmwconfig/servers/bam_server1/applications/oracle-bam_11.1.1/config/.
  
  Am I missing something?

  Hello

  you use the Linux operating system. so you need to run. / icommand.sh.

  in my previews post, I said clearly that you have to run \Oracle_SOA1\bam\bin\icommand.bat or icommand.sh. based on your env
  Please try with the commande./icommand.sh, you may be able to get.

  for you two question get answered if use. ICommand.sh

  Best regards
  Shiva Shankar
  TechDemocracy