Can not get my Satellite Pro L10

I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

Hi James,

Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

Kind regards

Tags: Toshiba

Similar Questions

  • How can I get my Satellite Pro A300-193 of hibernation?

    How can I get my Satellite Pro A300-193 with Windows XP SP3 from hibernation? (Get out the battery seems a little over the top)

    TIA

    EPX

    How about pressing the power button a bit more?

  • Can I get my satellite Pro 2100 high-speed USB 2.0?

    I have a new MP3 Jukebox that can operate at USB 2.0. Do anything to get my Satellite Pro 2100 to work at speed 2.0 that it currently only works with USB 1.1? Sorry, but I'm not very technical.
    Hope someone can advise me
    See you soon
    Bob

    Hi Bob

    The best solution for you is to buy a PCMCIA USB 2.0 card. As far as I know there are cards with two or four USB ports. This card is not expensive and the installation is not complicated.

  • Upgrade can not display drivers - Satellite Pro U200-10J

    Hi all

    I recently received a Satellite Pro U200, which I am very satisfied so far.

    My current display drivers are the 7.14.10.1147 of the 945GM Express chipset Intel. The new drivers that have been added to the drivers on the Toshiba site list 17 and are the 7.14.10.1227. Unfortunately, they install! I get a message just after the initialization of configuration that these drivers are not the most appropriate for this laptop and it closed facility. When I try to update the Device Manager, it simply tells me that I already have the latest drivers for my machine.

    Please notify; p

    Hello

    Before you start installing the new driver remove the old. You can do this in the properties of the device in Device Manager.

    I did it with my Vista preinstalled Satellite A200 (also with the Intel graphics card).

  • Can not start my Satellite Pro A10

    I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example

    Start:
    Safe mode
    Safe mode with networking
    Safe mode with command prompt
    Last known good configuration
    etc.

    None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:

    multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys

    I can't clear the checkpoint.

    Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.

    Any suggestions?

    See you soon

    HI Leon,

    It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
    A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.

    The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.

    Kind regards

  • No wireless connection - can not operate the Satellite Pro M40

    Hi, first Post so hope I understand that I have Satellite Pro M40 A desktop connected to the router via Ethernet cable computer laptop used in another room with a Wi - Fi connection, I guess that means I had a wireless network? Re-installed Win XP and Service Pack 2 as I couldn't find Toshiba rescue disk now I have no sounhd or wireless on laptop something is obviously missing can not remember what I'm supposed to excuse the ignorance, but any help would be appreciated thank you I use the ethernet cable temporarily to access internet on Sat Pro thanks Derek

    Hello Derek

    If some components of hardware in Device Manager not preloaded properly visit the Toshiba download under http://eu.computers.toshiba-europe.com page > support & downloads.

    You will find all the necessary drivers (WLAN and his driver). When the wireless network adapter is correctly installed, you will be able to configure the WLAN connection.

  • CD/DVD drive is not recognized on Satellite Pro L10

    Hello. can someone help me with the following: -.

    My DVD drive is not recognized on my computer and in the material properties, it says that my CDW/DVD driver may be damaged and needs re-setup or "updated".

    the (r) drive is shown as TSST Corp TS-L462A - can I get the update
    Download Driver from the site? (is it free?)

    Thanks for any help

    Paul

    Hi Paul,.

    You don't say what model of laptop you have, but generally speaking if you are using Windows XP then you will use the standard Microsoft drivers for your scanner.

    However, you can Toshiba drivers and utilities download from Toshiba web site by clicking on the Support section and downloads and selection of files to download. You will need to fill in the details of your laptop so that the list of appropriate driver (unless you have provided these details when you register).

    Kind regards

  • How can I get my Satellite Pro A100 product recovery media?

    When I bought my A100, I didn't any of the product recovery media. I assumed it would be pre - installed on a partition of my hard drive. Seems not to be the case.

    I want to resize my main partition to allow me to install linux on the space that would be made available. While Linux will do for me, just in case there is an error, I need a copy of the product for XP and other software pre-installed recovery media. Direct contacts on the Toshiba site are difficult to locate.

    So I was wondering if anyone can point me in the right direction? I am a UK user.

    Hello

    If the recovery disk was not supplied with the laptop, then you should be able to create a recovery disk using the preinstalled tool called Toshiba Recovery Disk Creator.
    I think that you didn t read the user manual after you have received the laptop

    Anyway usually the recovery disc can be ordered here:
    https://backupmedia.Toshiba.EU/landing.aspx

    But not all the recovery discs would be available, especially if the laptop series was abandoned this means that you can not order a recovery disc if the laptop series is too old you can also try to contact a local ASP (partner) in your country for assistance and could try to order this disc it.

    Otherwise, you must use an original disc of MS Windows all drivers can be downloaded from the page of European driver of Toshiba.

  • USB does not work on Satellite Pro L10

    Hi all

    my experience with the USB on my L10 connections were more confused, once stopped working however, never worked again...

    My two connectors on the left stopped working origionally (so-called peripheral usb not rec, the other thing that happens) when I noticed one on the back (usb2 I think) who worked for a minute then don't work more just like that! It is quite new and I have disabled the backup thing energy in properties. the device, I've tried to use is a microsoft mouse. Hmmm... come on toshiba.
    concerning
    dazza_p.

    [Edited by: admin on 22 July 05 18:05]

    Hello

    My experience is that USB port may stop working, but after phone restart works again. You can also try to remove the USB ports in the Device Manager, and after the scan for new hardware. The ports will be recognized and installed again.

    If there is no possible change hardware malfunction and you should contact the Service partner. I guess the unit is fairly new and warranty will cover all repair costs.

    Good bye

  • Max Memory for Satellite Pro L10

    What is the maximum amount of memory that can be installed in Satellite Pro L10? When I bought the laptop in 2005, it was 1 GB. This limit is now higher with the new BIOS, released November 6, 2009?

    Satellite Pro L10 (PSL15E) can manage with only 1 GB of RAM.
    BIOS update has nothing to do with it and after the update of the BIOS, that this value will not be changed.

  • Satellite Pro L10: where can I get a better graphics card

    Hey

    I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

    Thank you very much

    Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

    Good bye

  • My Satellite Pro A300 series number is not found and can not get the upgrade to Windows 7

    When I get my Satellite Pro serial number, it is said that it is not in the database and I can't go any following get Windows 7.

    Can anyone help?

    Hello

    What model of laptop do you have exactly?

    Which from Toshiba Web site did you use to upgrade to Windows 7?

    Are you sure of your laptop is supported and upgraded Windows 7 ready?

  • Satellite Pro L10 will not start the system

    Hello!

    I have a Toshiba Satellite Pro L10, which won't work for some reason any.

    The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

    It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

    There is also a 30 second countdown if I do nothing the portable samekh automatically.
    It is, none of these things work.

    Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

    He did about 50 times now and still nothing.
    I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

    Help, please!

    If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

    hope this makes sense and I gave you all you need to know.

    Thanks, B

    It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
    If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

    In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

  • Satellite Pro L10-103 - USB ports not working not

    Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

    Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

    Hey Buddy,

    As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

    After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

    In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

  • Satellite Pro L10: Recovery disk is not available

    HELO,
    I lost my disc of recovery for Toshiba Satellite Pro L10.
    Service in Poland say my only: Toshiba do not have this disc now.
    am I to do now?

    I need to reinstall my system.

    Model number PSL15E-00x009PL, serial number 55016672W

    Sorry, my English is bad.

    Krzysiek

    Hello

    It s very strange because this device is not very old, and as far as I know you can order all recover cd. Toshiba should always have a copy of the CD or DVD. I can t believe that it s is not possible.
    I would recommend asking EPA again or to call other ASP in Poland.

    The second possibility is to install the OS from the Microsoft CD-ROM, and then install the drivers set and tools of Toshiba.
    Such Toshiba things you will find on the page of the Toshiba driver.

Maybe you are looking for

  • When installing win7 migration software

    How to keep or transfer all my current software off my HP laptop when or before doing a clean installation of Windows 7 not and the upgrade I have a rc og windows 7 and want to install but don't want to lose all my software that is preinstalled on my

  • Can't leave an infected site

    I landed on hxxp: / /getsecure.cz.cc/firefox-updates The page opens a dialog box asking to download an update. The dialog box blocks any other interaction with ff. I can kill ff from the Windows Task Manager, but when I restart, the offending page as

  • Equium A100-147 - clicking noise from the HARD drive

    For awhile, I had clicking noise from the HARD drive and when the laptop could not, I assumed the reader was packed but trying a replacement nothing happens. I get a blue light for battery and a blue light (low) for the supply of direct current, but

  • Windows Vista home - start menu continues to appear on its own every few minutes

    My Start menu keeps popping up on its own every few minutes. Obviously it should only do this when I click on the Start button on the lower left side of the screen. Can someone advise me on how to fix the hole?

  • Global portal

    What are the conditions to be eligible for a global portal?