Can not get the Google domain name to work with Adobe-accommodation

Similar Questions

• I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  I can't get the charger 10 elements to work with Windows 8.1.  Is there a solution?

  Never mind.  I thought about it all.  Thanks anyway.

• BlackBerry smartphones can not get a stereo Bluetooth headset to work with Pandora

  I have a BB Storm 9530:

  Is it possible to get a stereo Bluetooth headset to work with Pandora?  Or it only works with the 3.5 mm headphone and internal speaker?

  I use my headset for Moto Rokr BT very well with Pandora. While the music is playing, try to hit the button options and see if you get an option to transfer to Bluetooth

• can not get the new hard drive to work in the Pavilion ze4805us laptop

  have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6

  At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports.  For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety.  Western Digital only provides downloads of software and support going back to Windows XP.  Windows Millennium Edition is not able to recognize the full capacity of the drive.  Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.

  It seems that this laptop is the same time that the books mentioned in this thread.  Response from JackShack gives the best explanation as to why he shows quite different in the BIOS.  It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS.  This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.

  I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed.  Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003.  The 2004 related BIOS earlier than probably took supported LBA.  What is the current version of BIOS?

  What is the exact message that you get when you try to install Windows Millennium Edition?

• Can not get the XML save data to work

  I'm trying to store data in an XML file.

  I want to create and store this XML file, I copied this example directly from the documentation (http://developer.blackberry.com/cascades/documentation/device_platform/data_access/working_with_xml... but it does not work):

  // Create QVariantMap objects to contain the data for each employee
          QVariantMap firstEmployee;
  
          // Populate each object with data
          firstEmployee["firstName"] = QVariant("Mike");
          firstEmployee["lastName"] = QVariant("Chepesky");
          firstEmployee["number"] = QVariant("51649875");
  
          // Add each employee to a QVariantList
          QVariantList myEmployeeList = QVariantList() << QVariant(firstEmployee);
  
          // Add the employee list to a top-level QVariantMap, then wrap it in a QVariant
          QVariantMap topLevelEmployeeMap;
          topLevelEmployeeMap[".root"] = QVariant("employees");
          topLevelEmployeeMap["employee"] = QVariant(myEmployeeList);
          QVariant myData = QVariant(topLevelEmployeeMap);
  
          // Retrieve the working directory, and create a temporary .xml file in that
          // location
          QDir home = QDir::home();
          QTemporaryFile file2(home.absoluteFilePath("myXMLFile.xml"));
          qDebug() << "Came here";
          qDebug() << home.absoluteFilePath("myXMLFile.xml");
          // Open the file that was created
          if (file2.open()) {
              // Create an XmlDataAccess object and save the data to the file
              qDebug() << "I came in this if statement";
              XmlDataAccess xda;
              xda.save(myData, &file2);
          }
          else
              qDebug() << "I didn't come in this if statement";
  

  After having tried everything, I can't see the .xml file to display in the file Explorer. The print statement that prints the location... /data/ and the second print statement shows he's going in the case.

  I can not even an XML base to save, so I wonder if I'm doing something wrong.

  Thank you

  Hey there,

  Well, the thing is that she is using an object QTemporaryFile (file2) and according to the description of the class QTemporaryFile:

  ".... QTemporaryFile is used to create unique temporary files safely. The file itself is created by calling ( Open). The temporary file name is guaranteed to be unique (that is, you are guaranteed to not overwrite an existing file), and the file will be deleted eventually to the destruction of the object QTemporaryFile... »

  If the object of File2 is destroyed in your application, that would be your problem...  You check in the file while the application is running?  Otherwise, you must use QFile instead so that the file will still be there at the end of your app... etc. etc.

  https://developer.BlackBerry.com/Cascades/reference/QFile.html

• Can not get the States of relaxation for work in the widget of blank publication of Muse

  Hello

  I don't know what I'm doing wrong, but I cannot get States to trigger (thumbnail) to work in the blank publication. That's what I do:

  I click on one of the triggers (thumbnails), open the States Panel, select the Normal State and fill the tile bearing the image of the . Then I select the rollover State and reduce the opacity to 50% or make any other changes to this State. I see [in the States Panel, in design mode] now in the States Panel which show both normal and Active image with an opacity of 100% and turnover and the mouse down show with an opacity of 50%. BUT when I preview the page in the browser, move the pointer of the mouse on the trigger does not change state of the thumbnail. It does not raise the change of the target, but the thumbnail itself doesn't change States. The idea is that when I mouse over the thumbnail, an image appears in the target box. But I also want the thumbnail to change status while in the rollover State. I have attached a screenshot of the Options Panel in case it helps.

  Any help with this will be greatly appreciated!

  Tania

  

  Depending on your options settings of Composition, changing the active State to the same settings as your rollover State. When you hover over the trigger will change and show the target.

• Can not get the graphic import settings to work

  Hello

  I try to import a graphic by reference to a set DPI (222). The following code example graphic design is important, but don't know the DPI setting. You can see what the problem is? A few notes:

  -J' wrote an equivalent FDK and everything worked well, the same exact way.

  -The GetImportDefaultParams() fills a table of about 45 members and GetPropIndex() retrieves the unique index, which suggests that the parties are working

  -After experimentation, I conclude that parms [index]. PropIdent is still not defined, that seems odd.

  Thank you.

  var doc is app. ActiveDoc;

  var tl = new TextLoc();

  TL.obj = doc. FirstSelectedGraphicInDoc;

  If (!) TL.obj.ObjectValid) tl.obj is doc. MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;

  TL.offset = 0;

  var parms = GetImportDefaultParams();

  index = GetPropIndex (parms, Constants.FS_GraphicDpi);

  parms [index]. TypedVal = 222;

  index = GetPropIndex (parms, Constants.FS_FitGraphicInSelectedRect);

  parms [index]. TypedVal = false;

  var returnParms = new PropVals();

  doc. Import (tl, "C:\\temp\\delete\\222_dpi.jpg", parms, returnParms);

  Hi Russ,

  What exactly is your problem, I don't think that its really the value NULL of PropIdent?

  So I guess that your problem is, dpi is not defined.

  If I change one of them * DefaultParams(), I use this function:

  function SetPropVal (prop, propval, params)

  {

  var i = GetPropIndex (params, prop);

  If (i<>

  Returns false;

  If (typeof (propval) is 'number')

  params [i].propVal.ival = propval;

  If (typeof (propval) is 'chain')

  params [i].propVal.sval = propval;

  Returns true;

  }

  First parameter is the value of constant, the second the value to set, and the third the * DefaultParams.

  Hope this helps

  Markus

• My version 10.4 of Mac is not compatible so I deleted Firefox completely. How can I get the old version (one that works with my system) back?

  I have a Mac OSX 10.4.11. I installed the new update of Firefox and when I tried to open it, he said that it was not compatible with my compatible with my computer. I deleted it and now I would like to know how to install the old version of Firefox - or any version that works with my system. Thank you!

  Please change the download page for other people do not have this problem. He said that the new version works with Mac OS 10.4 and more - I checked before downloading. I'm happy, there is a solution, but the download page does not. Don't use other people waste their time like I did.
  When you download 3.6.24 new version downloads right thereafter. I closed it, but this looks like a glitch.
  Thanks again for your help and to continue to support the old version. Firefox is a great browser.

• How can I get the addon "Colorful tabs" to work with the addon "classic restaurateur theme?

  I have the colourful tabs addon. But after the addition of the addon Classic theme restaurateur (to retrieve my tabs on the bottom), the color tabs addon does not work. My tabs are now all the same color work addon of the tabs colorful so that all tabs are different colors, so to say to which tab is the one that you use the right then the active tab puts a thin line on the tab bar of the same color as the active tab. So if you have 5 tabs open and they are all the diffierent colors, whether the tab your page in the Green, then you will see a thin green line on the screen (sort of like a horizontal border line). I can see a colored line (different from the color of all the tabs are now) under the tab bar. If I click on a different tab, change the color of the line. I can't tell what color my tab SHOULD be if it was just work, so I know that this addon is installed and working, but not to the poster for a reason any. Is it possible to fix this?

  I'm under Win 8.1 (64) and 30,0 FF. Thank you

  If you only use the extension of the CTR for the tabs at the bottom, then there are other ways like code in userChrome.css or an extension like tabs on background that might work better.

  • https://addons.Mozilla.org/firefox/addon/tabs-on-bottom/

  You can move the tabs on the lower position, just above the navigation area without the use of an extension cord with code to userChrome.css that basically, you just give the tab bar a higher value of - moz-box-ordinal-group (most toolbars have a default value for - moz-box-ordinal-group: 1 to show them in the order of DOM).

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #TabsToolbar{-moz-box-ordinal-group:10000!important}
  

  See:

  • [997353/questions/997353] How can I put the back below the navigation tabs?

• How can I get the full domain name host name

  I don't know that it should be easy enough, however I have not had much chance to figure it out myself.

  Basically, I have a simple script that gets all hosts in a cluster, and rename the first store of data, of ServerName_Boot, however when I have this, I just can't find a way truncated fqdn hostname just. In this case my hostname IS exactly 14 characters if it helps.

  Thanks in advance!

  You try to run the split on the host object, not the name itself.

  Just update it $Shortname = $VMHostname.Name.Split('.') [0]

• How can I get the nested case statements to work with listagg?

  I have a statement below that does not work as I want it, here is my code:

  Select

  cases where o.personal_label is not null

  then

  listagg (cases where s.subcodevalue like '% MON %')

  then s.subcodevalue |' '|| o.personal_label

  of other s.subcodevalue

  end,': ')

  the Group (order of s.subcodevalue) as subcodevalue

  on the other

  listagg (s.subcodevalue,': ')

  the Group (order of s.subcodevalue) as subcodevalue

  end

  of mtm_styles_new s, order_mtm o

  where INSTR (o.extras, s.code) > 0

  and o.bodyfitting = s.bodyfitting

  and o.division = s.division

  and s.subcodevalue is not null

  and o.ORDER_MTMID = 'somevalue '.

  It should bring the following

  * MY TEST: RPP

  or the following if the first case is not completed:

  * MONDAY: RPP

  I get an error message saying 'missing keyword', but cannot make out where, can someone please help me here?

  The following works fine as long as it is not a nested case statement, but I need to nest the case statement:

  Select listagg (cases where s.subcodevalue like '% MON %')

  then s.subcodevalue |' '|| o.personal_label

  of other s.subcodevalue

  end,': ')

  the Group (order of s.subcodevalue) as subcodevalue

  of mtm_styles_new s, order_mtm o

  where INSTR (o.extras, s.code) > 0

  and o.bodyfitting = s.bodyfitting

  and o.division = s.division

  and s.subcodevalue is not null

  and o.ORDER_MTMID = 'somevalue ';

  Out alias 'subcodevalue as' the case at the end of the case body.

• Can not get printer hp psc 750 to work with a new Dell dimension 8300

  Original title: the printer does not work

  I have a new Dell dimension 8300.  My printer is a former hp psc 750 printer scanner copier I can't print.  Can anyone help?

  Hello

  You should ask in the Forums of Windows answers corresponding to your version of Windows.

  Windows answers forums
  http://answers.Microsoft.com/en-us/Windows

  --------------------

  Check with HP Support, their drivers and documentation online and ask the HP
  forums for known problems.

  HP PSC 750 printer
  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=57769

  Drivers HP PSC 750
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=57769&

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ------------------------------

  It might be a problem with the computer as an OEM Dell provides support
  for Windows.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• How can I get the editor 12 elements to work with iPhoto.

  I tried to put 12 items to be my external editor in iPhoto. I was able to select in the Advanced preferences, but when I right click a selected photoand external editing, the Editor opens but the photo does not work.

  Same thing for RAW and jpeg, in the iPhoto library, or in a folder.

  Any ideas? Thank you to

  Dave.

  Most likely, you have chosen the logical file rather than the correct file. The current editor is buried in the content of the Support files folder in the PSE 12 folder:

  

• I can't get the sound or video to work on Skype, where he had previously worked.

  I can't get the sound or video to work with Skype where, previously, he had worked very well.

  Hello

  Sign in to Skype and make a Test call.

  Who will give you the steps to solve the problems, or contact the Skype Support.

  https://support.Skype.com/en/

  See you soon.

• When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  When I click on an address, instead of the name of domain appearing in the url field, only the IP address appears. How can I get the real domain to pop?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot

  Use a type of compressed as PNG or JPG image to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).