can not get the printer to work with pc

Similar Questions

• can not get the printer to work when sending my laptop computer that he used to work the printer is on and functional

  Can't get printer to work when sending my laptop computer that he used to work the printer is on and functional. Canon pixma MP180

  Hi NickManchisi

   

  1. for how long have you been faced with this problem?
  2. what happens when you try to print?
  3. do you receive any error messages?

  Method 1 :
  Please refer to the below mentioned article and check if the given steps help.

  http://support.Microsoft.com/kb/308028

  
  Method 2:

  You can even perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time when you have not experienced the problem.

   

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Refer to the following help link on performing a system restore.
  http://support.Microsoft.com/kb/306084

   

  I hope this helps.

• Can not get the printer to work under Windows

  I have a Brother Laser printer and a Canon ip8500 printer.  I tried to get one to run Windows XP Professional.  This week I installed the Hello printer software and it finds my printers but then I get this message "sharing is not supported for this type of printer.  When I click on settings in VMware, disabled the said printer icon.  If I close Windows and click on settings in VMware, the icon of the printer is enabled.  I'd appreciate it if someone could help me get one of my printers to work.  I must do something wrong and just can not understand.  I use VMware version 2 and Snow Leopard on my iMac.  Thank you.

  onemulligan wrote:

  I use Fusion 2.0 (116369) and a version of snow leopard 10.6.2 iMac.

  Fusion 2.0 (116369) is not compatible with Snow Leopard and you should spend at least VMware Fusion 2.0.6 (free upgrade) or VMware Fusion 3.0.1 (paid upgrade).

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• HP Laserjet Pro M251nw color: How can I get my printer to work with Windows 10

  I can't get my printer to work, it is installed, I have updated the drivers, I get a message that it is not connected - I did it is certain

  Hi @jotsol,

  I see you are having problems printing from Windows 10. I'd love to help you.

  I wasn't sure if you meant that you run Windows Update to update the drivers or downloaded the last.

  I would say to uninstall all old software of the printer, if you updated to Windows 10. Then, download and install the latest drivers from HP. color HP LaserJet Pro 200 M251 series full feature software and drivers.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  How is the printer connected? (USB, Ethernet, WiFi)

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.

• How can I get my printer to work with Windows 7?

  I can't get my printer Epson Stylus NX415 installed with Windows 7 Professional, I had recently installed on my computer.  I used to have Vista Home Premium.   and it worked fine.  I get the message, "Cannot be installed on this system of the window."  When I try to find the compatibility for this.

  How can I make my printer is compatible with Windows 7 so I can install it?
  Marsha

  Go to the Epson website and download and install the Windows 7 drivers

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=128287&infoType=downloads&platform=OSF_W_7-64

  It is best to ask in one place.

• Can not get the camers to work

  original title: ca ot get the camers to work

  Cannot get the camera memory card to work

  Please explain exactly what you have already tried.

  The info might be worth a visit:

  Apparently, you have an external or internal USB media player?

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the photos of your choice in a folder on your hard drive
  drive.

  Just a select group of photos do a right-click and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

• Can not get the printer to print with the new windows 8

  I recently rec'd a new computer with the new windows program (8). Printer works sometimes, but not all the time. The setting was listed as offline. I can't understand how to get online. I have sharing enabled. I entered the paraphrase wireless often - sometimes it prints a doc and no mmore. Other times it does not print anything. Can anyone help.

  Hi MargieSchellinger.

  I'm glad to know that you've posted queries in Microsoft communities.

  From your description, I can understand that you can not print in Windows 8.

  I understand that it must be frustrating, but don't worry, we are here to help fix your problem and guide you in the right direction.

  Could you please answer this question so that I can guide you in the right direction.

  -What is the number of brands and models of printer?

  I want you to try the following method and check.

  Method 1: If the printer is offline, then try the following steps to connect to the network.

  With the right button of the new queue in printers and faxes tool and clear the printer offline use setting. This resets the registry key to the correct value.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution.

  Method 2: Please follow the links and instructions mentioned in the link to fix the problem with the printer.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  http://windows.microsoft.com/en-US/windows-8/find-and-install-printer-drivers.

  Method 3: Follow the link which provides instructions on how to install a printer.

  http://windows.microsoft.com/en-US/windows-8/install-a-printer.

  Method 4: To connect printers please follow the link and the instructions mentioned in the link.

  http://windows.microsoft.com/en-US/windows-8/add-device-or-pc-to-network.

  Hope the above information helps.

  Do get back to us and let us know the State of the question in the case where you need further help or your next post.

• After restarting my computer Windows Vista, I can not get the wireless to work.

  Re start my Vista and now l can't get broadband wireless, but before he started he was work ing great. Can anyone help please, or can I use my windows 7 on my laptop by paying a fee

  Paul

  original title: Vista, broadband

  The computer is a Toshiba Satellite model PSLB8E-0CK00YEN

  l cleaned my vista with my drive, everything works, but the broadband wireless

  Which means that Vista has erased my discs, how l can get the disks on my lap top?

  Actually - if you have installed Windows Vista from scratch yourself (booted from the Windows Vista support and followed along to do a clean install or use some CD/DVD by default) then you're the one who has erased your disks and all data about them.  In any case - your "wifi" does not indicate any wiping.  * smile *.

  If it's just a simple Windows Vista DVD, then * you * need to get all the drivers for hardware on this computer.  You may need to use a different machine (of course) in order to get the proper and then drivers transfer to them for the Toshiba by USB/CD/DVD.

  Is this REALLY a Toshiba Satellite L300-20 d?  (Click on this link to check...)
  The * number * of part is PSLB8E-0CK00YEN.

  You should be able to get the drivers you need here:
  http://UK.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK

  Laptops
  Satellite
  Satellite L series
  Satellite L300
  PSLB8E
  Windows Vista 32 bit
  ----- All -----
     
     

  (Click on research)

  Page 3 of pilots - one of the two wireless Lan drivers.  I have no way of knowing that.

• Can not get my printer to work - and no way of contacting HP

  OK, I have a mess.  I bought a new printer HP - HP 8600 all-in-one - N911a.

  He set up and worked fine for about a week.  Then I stopped working.  My wife says that she did that hit 'print '.  (in the meantime, I had to replace the hard drive, so I assumed that was the problem).  New drive hard, all re-installed, but I'm having the same problem with the printer.  Its not recognizing/no impression at all.

  I IYOGI they said that the printer must be bad.

  I connect through a USB cable.

  The computer says "unrecognized device" so I know that the cable is good.

  When I try to print the test page, it is just caught up in the print queue.

  I don't think that the printer is bad, I think that some his conflict with the printer stupid trying to be a network printer.  I'm not a respectable.  From time to time, the computer connects to a non-secure local network, but I did not.  I want to just plug in my printer dang!

  Why the world is so difficult?  And when HP stop supporting its products?

  Sorry, I am over 40 so I'm too old for this world and frustrated b/c it really cost me days to try to get all this done.  I swear, I'm going to just use a typewritter...

  OK, I FOUND a number on the HP support.  GUESS what the problem was?

  I plugged the printer into a power strip / surge protector.  It must be plugged directly into the wall.

  He has his own surge protection.

  It would be NICE that the manual says something about this...

  But mark this one RESOLVED!

• Satellite Pro P100 can not get the screen to work again

  If someone could point me in the right direction, I would be very grateful!

  I bought a monitor to use when I am in the office (it's a LG Flatron L225WT), installed the software that came with it and plugged. Nothing seemed to happen, then in Toshiba HWSetup, I changed my power on the screen 'LCD + Analog RGB'.

  To cut a long story short, the external screen works perfectly now, but I cannot access the internal screen, even after changing the power supply on the display to 'Automatic Selection '. The Fn + F5 key does not appear to have any effect at all.

  I must have inadvertently done something to mess up the computer. Can anyone suggest how I could reset it back?

  TIA to all who can help you!

  -Laurence

  I put t know what laptop you have and don t know what OS you are using, but it seems that you have managed to set the external monitor as the main screen.
  You should change in display properties (right click on desktop-> properties)

  Somewhere in the settings, you should try to score the internal display (1) and should mark use this device as the primary monitor

  You won't find any similar settings or this will not help then set the operating system to the point of time at the beginning. In this case all settings will be reset!

• OfficeJet Pro 8600 Plus: can not get the printer to function after installing new wireless router

  I recently changed routers from D-Link to a Netgear R6400.  I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more.  When I try to change the IP address, which is what I think I do, the screen indicates "this feature has been locked by your system administrator or the one who put up the system."  I'm the only one using this printer and I put in place originally, but I do not remember 'locking' anything.  Will you please tell me how to solve this problem, so I can use the printer again.

  Hello

  Thank you for using the HP forum.

  A suggestion that we recommend is to uninstall and reinstall the software FULL of features.

  Alternatively, you can try the doctor print and Scan?

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Can not get the printer to answer (Dell P703w) printer is turned on, is recognized by the computer as the default printer, but when I try to print a page - nothing happens

  Printer is turned on, is recognized by the computer as the default printer, but when I try to print a page, I get nothing. Have you tried "Troubleshooting" and it says I have 3 items in the quieh that prevent printing?

  Hi, Mike,.

  A moderator has moved this thread to the hardware and drivers Forum.  Note the drop-down menus by clicking on the links below.  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware

  Save the documents you want to print

  Open the Printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the print queue

  Start > type services.msc

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the Service

  Close Services window

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the IEEE... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Computer reboot and Windows will reload the drivers

  Back to Services.msc

  Right-click on print spooler and select start

  Wait for Windows to start the Service

  Services nearby

  Try printing again

  Go to the manufacturer's website and search for driver updates

• Can not get the web service works

  I get the following error message when you try to call ASP.NET web service on the same host.
  
  TypeError: Error #1034: has no Type constraint: cannot convert function-2010 in Namespace.
  to mx.rpc.wsdl::WSDL/::processNamespaces()
  to mx.rpc.wsdl::WSDL$iinit()
  to mx.rpc.wsdl::WSDLLoader/mx.rpc.wsdl:WSDLLoader::resultHandler()
  at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::resultHandler()
  at mx.rpc::Responder/result()
  at mx.rpc::AsyncRequest/acknowledge()
  to: DirectHTTPMessageResponder / completeHandler)
  at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/flash.net:URLLoader::onComplete()
  
  I use http://localhost/Hello/Service1.asmx?WSDL as the wsdl and it works when I browse it with the browser.
  
  Any help would be much appreciated.
  Thank you
  

  Got it... Finally!

  In my Tools.as file I had a static method named Split(Array,delimiter). I added this because I didn't like the stock of String.Split implementation... ie you get nothing if the delimiter is not found in the string, I wanted an array containing a single element in this document, the original string.

  in any case... There was a conflict of names with the Split method in the SDK because as soon as I changed the name of the method of SplitMeUp it worked and I got no longer error when loading of the WSDL.