can not get windows puts down dale load KB2492386 and KB2522422

Similar Questions

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• I HAVE A DRIVE AND REDEMPTION CODE CAN NOT GET IT TO DOWN LOAD TO MY COMPUTER, HELLLLLP!

  CAN'T THIS DOWN LOAD TO MY COMPUTER, HELLLLLP!   DRIVE JUST SHOULD INSTALL IT I THOUGHT, ADD CODE REDEMPTION AND IM IN LAW? WRONGGGG, THEY WANT A SERIAL NUMBER, I DO NOT HAVE AND CAN NOT FIND!... NOW, WHAT

  Hello

  You can check the following links for assistance

  Redemption code help

  Numbers of students and teachers edition series, redemption codes and product codes

  Find the serial number of your Adobe product quickly

• Just reinstalled Windows 7 SP1 to allow the update of Windows 10 but can not get Windows update to apply the updates.

  Brand new Windows 7 SP1 installation on a new disc wont format download updates from windows update, just stay to "check updates". Tried troubleshooting for windows update but starts ok, but never complete too.

  I tried troubleshooting Microsoft online diagnosis that difficulty various problems but windows update has not changed

  All clients by default update can not handle KB3168965 (released four days ago), most a few others. Download and install KB3161647 included in KB3161608.

  https://support.Microsoft.com/en-us/KB/3161608

  KB3161608 requires KB3020369 installed.

  https://support.Microsoft.com/en-us/KB/3020369

  Manual installation of updates requires research to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• can not get quick popup to save the password and plugin install

  I use Firefox on Win7 os b4bit 10.0.0.2. I found that I can never get quick popup with a password form submission. Even the quick installation plugin popup can never get... The quick popup can display only safe mode.

  I tried to re - install the whole browser and erased all of the plugins/extensions. Never worked... Help, please!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• I have windows 8 and can not get my gigabit cam to load - help please!

  All cameras operate on all windows PCs - I use windows vista, but have now windows8. My cam-pcl-pc110 gigabit is not responsible or

  recognized by my pc. Does anyone can help that I'm not very versed on the pc! Do I have to buy a new cam?

  [Moved from comments]

  All cameras operate on all windows PCs - I use windows vista, but have now windows8. My cam-pcl-pc110 gigabit is not responsible or

  recognized by my pc. Does anyone can help that I'm not very versed on the pc! Do I have to buy a new cam?

  [Moved from comments]

  "All the cameras operate on all windows pc?
   
  Lol all the hardware and software support come from the manufacturer of software and hardware (of the product in question.)  If the hardware manufacturer (Gigabit you said?) supports this model camera (cam-pcl-pc110) under Windows 8 - they will provide drivers, you can get through them and install.  If they are not - you may be looking to get a new camera.
   
  Another series of questions...
   
  Windows 8 Pro?  With the Media Center pack?

• I can not get windows to load.i have made the recovery discs, but cannot get to work. How can I make this .thanks

  When I turn on the computer, it goes to a blue screen and stops there.

  If you have performed according to instructions of the manufacturer of the computer Vista recovery disc and you encounter problems by encouraging them to work, you must contact the manufacturer of the computer for help.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• I can not get windows to date. I get an error number: 0 x 80240036 when I click on the update button

  After going to the windows update page and clicking on the express install button I get an error number: 0 x 80240036. Any ideas on FIXING THIS?

  I have seen this error quite a bit lately and the majority of the case because Windows XP is not upgraded to SP3.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• I can not get windows to start.

  I can't log on my computer except in safe mode. I don't know what the problem is. I am running XP service pak 3. It acts like it will start normally. "" and then just after the windows xp screen comes in a gray box flashes on saying info no input signal go to energy saving and then takes me "you want to start windows normally" or SafeMode etc.. Ive tried going to last known good configuration and nothing works but the mode without danger. Help, please!

  Hi margaretbrown,

  This problem may be caused by one of the options below.

  1. monitor not connected correctly.
  2. bad hardware

  Monitor not connected correctly

  Verify that the monitor is connected to the back of the screen, as well as the back of the computer.

  If the monitor seems to be connected correctly, check that a cable is not loose by disconnecting any cables that may be disconnected at the back of the screen (usually the data cable cannot be disconnected). Then unplug the data cable connected to the back of the computer, and then reconnect the cable. By connecting the cable to the back of the computer, ensure that the cable connection is strained. Most computers will also have the ends of screws that can be screwed to keep the connector in place.

  Faulty hardware

  If the connections look OK, unfortunately it is likely that the monitor or the computer graphics card is bad. To test this component is bad, either connect a different monitor to your computer or connect your monitor to another computer.

  * If another monitor works on your computer, it's probably a bad screen.
  * If your monitor works on another computer, it's probably a bad video card.

• I can't get Windows Live Mail connected online

  I have the internet connection, but I can not get Windows Live Mail connected online, nor Internet explorer.  Any other, Firefox, Skype, Chrome... works very well. Thanks you for FELP.

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• Signature on a router encrypted on a Windows XP Edition network.with family business, access encryption code is I can't get Windows to accept a code with so many characters and length 55 numbers

  Original title: signature on a router encrypted with Windows XP Home Edition

  I have a Toshiba laptop with Windows XP Home Edition. I am trying to connect wireless to a Cisco router on a corporate network. Encryption access code is length 55 numbers and I can not get Windows to accept a code with so many characters that I can on the router. Is this because I use Windows Home version? Y at - it an upgrade that will help you? Will I be more successful if I update to Windows XP Professional?

  Hello

  You should contact the support staff of assistance companies.

  You can also try to post this topic on the TechNet forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

• Im not getting a completion on my load down can help you?

  Im not getting a completion on my load down, it stops one can of 96% you tell me why?

  It took three attempts but I got the last time by uninstalling all previous queries CS6, restart the computer from scratch using Firefox as browser.

  Maybe that's a problem with Safari. I can't prove it, but it was a success for me. John to try.

• Can not get updates Windows 7, error code 646

  Windows updates fail almost always error code 646 today.

  Other error codes are application error 100, event id 1000 and mshtnl.dll (registry errors?)

  8 Windows Explorer has stopped working properly, running on windows 7

  There has been a change in the health of windows, event 42

  Here are some of my problems

  * original title - can not get updates, Windows 7 instead of 8 as its supposed to, registry errors *.

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP