Can not pass 9.3 - get 'you are not connected to the Internet.

Similar Questions

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• ITunes 12.3.2.35 says it can not connect to the internet, no connection, but my internet works fine.  I installed Windows 7.  Any help?

  I am using windows 7 on my pc.  I just installed the new Itunes, 12.3.2.35, and it does not connect to the internet.  I ran diagnostics and it said that the only test that failed was "secure link to iTunes Store failed.  What could be the problem?

  Thanks for any help.

  Yes, I had the same issue and have also windows 7. Here's what I did to remedy.

  1. go to your Start menu and in the search the bottom type in cmd menu.

  2. right click on cmd at the top of the menu, and then click "Run as Administrator". A black box should appear.

  3. type netsh winsock reset. It should invite you to restart your computer.

  4 restart your computer and then open itunes again.

  I did and now my itunes is on the rise and running and connection to the store. I hope this helps!

• my WMP can not connect to the internet

  When I try to update the album info I get a message saying that I am not connected to the net, although other programs can connect to the net I already clicked on more options > confidentiality > media info updated box net but I always get the error message any help will be appreciated

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         What is the accurate and complete error message?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

  Method 2:

  Follow the steps described in the following link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Method 3:

  If the above step disable and enable Windows Media Player to Windows feature on or off, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn off Windows Media Player, click media feature. And uncheck Windows Media Player and click OK.

  c. restart the computer to apply the changes.

  Note: follow the steps above to activate or activate Windows Media Player and check if the problem occurs.

  For more information, refer to this link turn Windows features turn on or off:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• browser can not connect to the internet-help!

  Running A Dell 3000 desktop with XP.  After a reasonably stable relationship, my browser does not open an internet connection.  I tried IE and Firefox, neither of which work. When I try to open the browser, I get "connection to the 207.46.250.101 site." and then the browser tells me that it cannot open the web page. Operation of the fine to send and receive Outlook e-mail.

  The connection is through Motorola modem and router D-Link.  My office is connected to the router which is connected to the modem.  Other home computers (wired and wireless) continue to work well on the same modem-router, set up.  Comcast tech support was not able to help.  We went through recycling, ipconfig, ping, etc.  I bypassed the router by attempting a direct connection to the modem - same result.  It seems that the router and modem are in order and the problem seems to be with the office or the software.

  I tried to restore the system to an earlier time when the problem started, which did not help.  I have no restore points more early to get to the system restore.

  I got the following message with attemtps have failed to get on the internet: "Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.  Check the settings of the firewall for the HTTP port (80), HTTPS port (431) and FTP port (21). »

  I have disabled the Windows Firewall.

  Previously, I used zone alarm and uninstalled it, although it seems always on the list Add/Remove programs in Control Panel.  Nothing opens when I double click to open the program.  When I try to remove zonealarm, I get the following message: TrueVector Internet monitor has not been uninstalled.  Uninstall wasn't able to stop the True Vector software services, this will happen if other software uses the true vector engine.  to uninstall zonealarm mare that all other true vector programs have been closed. "I don't know what another program uses TrueVector, or if it has nothing to do with the problem.

  Sorry to be verbose, but it took a lot of time and I wanted to give as much information as possible about the problem.

  any suggestions?  Thank you!

  
  

• I placed a time limit on my AirPort Extreme and now I can not access my airport utility to disable, because I can not connect to the Internet?

  Unable to connect due to the delay of access and can not turn off the limit

  Airport the warm reboot... He will return to the default settings for 5 minutes so you can remedy.

• Can not connect to the Internet: this site is not reachable

  Hi all

  Recently, I am not able to open most Web sites,

  It happened all of a sudden, it comes with below error:

  
  

  This site is not reachable

  Kickass.Re refuses to connect.

  Try:

  • Reload the page
  • Checking the connection
  • Check the proxy server and firewall

  ERR_CONNECTION_REFUSED

  In order to get your help

  Adware can be installed on your Mac. Remove the Adware.

  1. use Malwarebytes Anti-Malware for Mac to remove adware.

  https://www.Malwarebytes.org/antimalware/Mac/

  Download, install, open and run by clicking on the "Scan for Adware" button to remove the adware.

  Once this is done, exit Malwarebytes Anti-Malware.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  3 safari > Preferences > Search > search engine:

  Select your preferred search engine

  4. visit the site that you want it to be the home page

  Safari > Preferences > general > home page

  Click on the button "set to the current Page.

• HP 15 Notebook PC LOT33UA #ABA: I can not connect to the Internet.

  Each network device can connect to my router except this laptop. I tried to use an Ethernet cable but no luck. Can you help me?

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you're not able to connect to the network wirelessly with your laptop

  Please read the tips and the steps below, find out what is relevant to your current situation and try

  by performing a few steps which could help solve the question

  1. check that the led wireless, try to turn on the wireless by pressing the wireless button

  2. check if Wireless [WLAN] is enabled in the BIOS

  3. check if you have yellow "!" mark or red ' x' for Wireless Adapter in Device Manager

  Note: make a right click on the adapter, uninstall the driver and restart the device [Windows will load the drivers again]

  4. check the last time wireless worked fine and perform system restore, reset the BIOS default setup

  pressing the F10 key in BIOS

  5. power OFF the Unit, remove the AC adapter / CC & battery, press in and hold the Power button for 1 minute

  6. you can also download and install the last update of the BIOS for the unit on the Site of HP Support

  7 uninstall drivers Wireless Device Manager again, and this time download and re-install the drivers of

  the HP's Support Site

  8. If you use HP Wireless Assistant on your device, please uninstall the same and re-install again

  9. check if your wireless card detects any other nearby wireless network it, in this case delete existing wireless

  Profile and recreate the same

  10 incase if these steps does not resolve the problem, you can try removing and reinstalling the card group wireless

  Note: Please do this step only if you are comfortable doing

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• Computer laptop Sony Vaio can not connect to the Internet.

  Original title: Internet

  I bought a Sony Vaio laptop to my grandson. (Model UN. PCG 61611L. It is about 2 years. He can't go on the internet. It is not our internet provider so I think that

  He needs a recovery disk. Where can I buy one install?

  Hello

  Yes, I agree that you'll want to contact Sony about this. However, if the only problem with the laptop is not able to connect, then you have a recovery disk.

  The first thing we do is to ensure that you have all necessary drivers installed on the laptop. Again, this is something you can find at the Sony support site.

  http://eSupport.Sony.com/Perl/select-System.pl

  Because this laptop is not able to get online, then you will probably need to use another PC to go on the support site. Be sure to insert the appropriate for the Vaio model number and download all drivers in system on a flash drive, or other portable storage unit. Then just plug the drive into the Vaio and install these drivers.

• I have a xp edition version 2002 family and can not connect to the internet, is it possible to download updates on a different computer to a usb port and transfer updates

  Please could you help me that I am not the most until no one date when irt comes to this. my daughter has a windows xp version 2002 and I can't connect to internet, I know that the computer is dated but I'd like to update the computer, is it possible to download the updates on your part on my computer and transfer bu using a USB

  Hello

  The short answer is almost certainly yes.

  In order to better inform that we will need information from you...

  What is the brand, the range and the model of your PC (or card mother brand and model if a custom build)?

  What service pack are you in?

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section on your service pack level

  Is there any device listed in Device Manager problem?

  • Click Start
  • Click on run
  • Type devmgmt.msc and press enter
  • Search for devices in "Other devices" and devices marked with exclamation point (!) and let us know what they are

  Furthermore, we are not Microsoft, just a collection of individuals from all over the world who can help people like you solve their PC problems.

  Tricky

• iOS 9.2.1 check failed because you are more connected to the Internet. What I'm doing. It's so boring. I am connected and 5g wifi works fine on safari etc.

  As above

  Looks like your signal doesn't work well. What network are you truly connected to? You mention 5G, then you mention Wi - Fi, which is? If it does well in OTA update, then I suggest you connect the device to the computer and iTunes and updated in this way.

• Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

  Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I can't download photoshop elements because it keeps saying 'you're not connected to the internet.  Well, if I'm not how did I get this far?  No problem with Safari or Mail.

  I can't download photoshop elements because it keeps saying 'you're not connected to the internet. Well, if I'm not how did I get this far? No problem with Safari or Mail.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html