Can not put the dwt /BC remote site file

Similar Questions

• How can I change the definition of remote site without breaking all the links?

  I created a website and put it here http://home.Comcast.NET/~alpsf/index.html to test it during construction.  Now when I change the definition of remote site to the local site in DW, all the links are broken.  I suspect now that the problem is I did my site root and ~alpsf/ DW inserted in all the links.  Is there a way to fix this?

  Thank you very much.

  You can do a search and replace to change the links in the world. Make sure you do a full backup of the site before doing this incase you do not correctly. Let me stress what still once, backup your entire site incase you need to restore. If you have created a "new site" and it will not part of the / ~ alpsf site, then you will need to define a new site and copy all the files in this folder (I'm guessing that this is the case). I copy the files outside Dreamweaver. You could do this without touching the files in the ~ alpsf directory. There are many variable here because I don't know exactly what you are doing.

  On the file menu select window/results-select search. (This is done if the search engine is not open).

  Find: all of the current Local Site

  Search: Source Code

  Search: "/ ~alpsf/".

  Replace: ' / '.

  That should do it, but it is a very delicate thing. I wouldn't have a problem doing this as long as I backed everything up.

  Jim

  Published: you will need to enter in your css, spry files and all others who has links to do the same (this time only select search in: current document when the document is open). Once this is done, delete the entire remote site and upload the changes once you check that everything is complete.

• Can not put the item in the basket on the Amazon site

  In Firefox (15), Safari, but not Opera I can't put an article in the basket on the Amazon website. This problem occurs ONLY when you purchase an article in clothing and accessories, where it is necessary to specify a size. If I search for and select that item, like a pair of pants, the section where the item is put in the basket is dimmed, and there is a statement to select a size. I selects a size, and then move the cursor to the point where I can add it to the cart. But this section remains dim instead of shiny. I can't add the item to the basket. UNLESS I order a belt! A belt has a size, you must specify, and you can put it in the basket. I DIDN'T HAVE THIS PROBLEM until ABOUT a WEEK AGO, after downloading a software update that contains a HP printer driver. That the problem got solved by a technician HP working remotely. I talked to Apple several times, he cannot understand what is the problem with the Amazon site. I don't have this problem on a MacBookPro running 10.6.8. I have it only on a MacPro 10.6.8 also running desktop machine. I reinstalled 10.6.3 on the desktop Mac since the Snow Leopard DVD and updated to 10.6.8 (not including the HP driver on the chance that could have triggered it. Unable to move items "sizes" to cart persists, as described. Note once again, that I have the same problem in Safari, but not a problem at the opera. I encouraged cookies and third party cookies. I tried to restart with disabled modules. I have deleted cookies from Amazon, and Amazon to re - install then allowed them. There is no firewall to the top. The desktop machine is about 6-8 years. Even if I only have 1 GB of RAM, there is no apparent hardware problem. This could be a firmware issue? Of course, I have the workaround to use Opera or the laptop if I want to buy socks, but it's annoying to have this inconsistency. Any advice would be appreciated. Thank you. Gene

  If clearing cookies doesn't work, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.

  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other files to present as cookie cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.

  • http://KB.mozillazine.org/cookies

• try to pay some bills and cannot access the Web page. I make each month and do not know how to correct it. does not that this program can not display the page's Web site

  happening only on a few sites of bill payment.

  Hello
  
  1. what internet browser do you use?
  2. If you are using Internet Explorer which version do you have installed?
   
  If you use Internet Explorer see the methods below.
   
  Method 1.
  I recommend you follow the steps listed in the article below and check.
  You cannot connect to or connect to Web sites in Internet Explorer secure
  http://support.Microsoft.com/kb/813444
  
  Method 2.
  If the problem persists, add sites to the trusted Web site and check. Refer to the article below for the procedure.
  Security zones: adding or removing websites
  http://Windows.Microsoft.com/en-us/Windows7/security-zones-adding-or-removing-websites
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can hear his only, can not see the video when playing wmv files received by e-mail

  Original title: wmv files

  I receive emails with extension of wmv file, but cannot hear the sound.  I need to download and where?

   
  Hi 123lj,
   
  1. what program you use to play wmv files?
  
  If you use Windows Media Player to play the file, then try these steps and check the result.
  Step 1: Check Windows Media Player video playback settings
  a. Click Start, type of media player, and then click Windows Media Player.
  b. click the ALT on the keyboard to display Tools menu, click Options.
  c. click on the performance tab.
  d. under reading video and DVD, check if "Enable DirectX Video Acceleration for WMV files" is selected. If this is not the case, then select it.
  e. click ok to apply the changes.
  f. close media player and check the result.
   
  Step 2: Check the updates of Windows to see if there is an update available for your video card
  a. see question ' "what types of updates can Windows install automatically?".
  b. follow the instructions to install the update of the driver.
   
  Step 3: If your driver software update does not resolve the problem, try to reduce (or turn off) video hardware acceleration by following these steps.
  a. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.
  Note: some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
   
  See Read an audio or video file: frequently asked questions
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can not put the correct date, time, or whatever it is on the LCD on my HANDYCAM DCR-HC30

  I had not used my cHandycam for quite awhile for the date and the time is shown in the January 1, 2004, at 12: 00 and I was not able to change using the LCD screen. I'm fairly certain that the remote control battery is no good because I never changed it. The camera still records both Ribbon and the memory card, but I would like to be able to set the date and time. Has anyone else had the same problem with this Handycam or know how to fix. I charge the internal battery by pluging in there for more than 24 hours. The internal battery is bad and if so, is it replaceable by me? Thank you.

  If you can access the MENU of the Handycam, please follow the steps below to set the date and time.

  1. turn on your camcorder and open the LCD.

  2. press on P-MENU then MENU.

  3. Select CLOCK SET by pressing the HIGH or arrow DOWN found at the upper and lower part of the screen, then press OK in the lower right corner.

  4 set the YEAR by pressing the HIGH or DOWN arrow found at top and bottom of the screen, and then tap OK in the lower right. Follow the same procedure with the MONTH, DAY, HOUR and MINUTE, and then tap OK.

  NOTE: To midnight, set at 12:00 AM. For lunch, set for 12:00

  You can also view page 22 operations here Guide: https://docs.sony.com/release/DCRHC30.pdf

  If my post answered your question, please mark it as "accept as a Solution.

• Can not put the file of 4 GB key USB 16 GB?

  So I have a 64 GB drive (C :) in my Windows XP laptop and a Cenron 16 GB USB drive. In the computer laptop was a video which is 4 GB, and no matter how I drag or copy in the flash drive, an error message will appear and keep saying that the USB is full and I need to delete some files. Even if I tried to empty on the flash drive (which allow the 15.5 GB left) and check if video is used by other programs, the result is the same. I want to know why it happened and how to fix it?

  Thank you.

  The USB (no doubt you mean a USB flash drive) is probably formatted using FAT32, for which the maximum file size is 4 GB less 1 byte.  If you want to use the drive for larger files, you will need to reformat using NTFS.  Of course, reformatting will destroy all data currently on the disk.

  You can try to convert the disk from FAT32 to NTFS, which is supposed to preserve the data, but I suggest that you try not to have any non - back up important data.

• Can not put the image to 'Fit to screen' on the third screen (wacom) .d Photoshop cc 2015

  In the update of 2015 when I open two windows of the same file both images zooming in and out together. I'm working with a Wacom tablet screen on which I do hide photos and so I want the image to 100% or greater. But on my main screen 24 inch, I used to keep the same image to 'Fit to screen' to see the entire image. I can't do that more. I don't know it's a preference that I can't find.i

  I use two monitors and the Wacom tablet such as one-third of the screen.

  Hello

  If you use the Zoom tool, please ensure that you do not have Windows all Zoom checked in the Options bar.

  I hope this helps.

  Howard.

• Can not disable the software, can not put the licensed software

  I had two computers on which I signed in first 13 items, and and 13 Photoshop elements, then I reset the computers, without disconnection.  These computers are returned to Amazon.   But now, when I try to connect to my Macbook and my iMac, I get an error saying that I've reached the maximum number of allowed computers.

  So, how do this license on my Macbook and my iMac?

  When you have a non-functional computer and cannot turn off

  Don't forget to request ONLY activation support set your number of activations

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990

  Learn how to enable or disable Adobe applications

• Can not find the 'script - layers of exporting files"more

  I want to export all my layers in JPEG files.

  I can't find this feature more.

  Generally, it could be found in: file > script >...

  This is under file > export.

• Can I put the Satellite P100-240 with internal fingerprint reader

  I have a Satellite P100-240.
  Although he did not come equipped with material to print finger scanning, it has clogged the hole in the box where he would go.
  So I wonder, can I get the hardware scanning separately and adapt it to the laptop?

  I don't see any option for the material to be sold separately on the Tosh site and I'm not even sure who makes the hardware for them so I can source it independently.

  Can we offer here advice or information on this operation?

  Hello

  You are right. Some P100 units support the fingerprint, and some units have been delivered without this feature.
  As I m not wrong not these fingerprints can be upgraded

  But to be 100% sure you should ask the local ASP (authorized service provider) for details.
  But in my opinion you can not put the laptop with fingerprint reader.

  Good bye

• during Windows installation I got this rundll32.exe and in the window below says windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  during the set up after using the windows recovery Cd, I got this massage.
  RunDII32.exe
  Windows can not access the device, specified path.or file. You can not have the appropriate permissions to access the item.
  and in another window below I have windows Script host who say,
  Can't find script "VBScript" script "c:\System.sav\Util\TDCTWKs\HideCMD.vbs" engine

  Hello

  For problems using the recovery disk, contact the manufacturer of your computer.

  It is the process of recovering from the manufacturer, not Microsoft.

  See you soon.

• I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  I installed JZip and now I can not put my homepage of everything except the jzip search page. How to disable the functionality of jzip?

  See:

  • http://KB.mozillazine.org/about:config

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.