Can not run the Palm installation disc

Similar Questions

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• Can not run the program "keytool": java.io.IOException

  Hello
  
  I would like to follow the procedure to change the password
  glassfish server hosting APEX earphone
  using the change key word subcommand of past, but the keytool utility
  not found:
  
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config >/opt/glassfish3/bin/asadmin
  / opt/glassfish3/bin/asadmin
  Use "exit" to exit and online 'help' for help.
  asadmin > change of master-password mydom01
  Enter the current password > changeit
  
  Enter the new password > changedit
  
  Re-enter the new password > changedit
  
  Can not run the program "keytool": java.io.IOException: error = 2, no such file or directory
  Past change key word command failed.
  asadmin >
  Multimode command failed.
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config > what java
  / usr/bin/Java
  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config >
  
  Glassfish entire works well outside it.
  
  keytool could be found in/usr/java/latest/bin/keytool.
  
  We need to have that in the path? There is no requirement in the
  Installation Guide for this, nor did the RPM installation adjust the system
  path accordingly.
  
  I hope someone can tell my how things should be in regards to keytool?
  
  Thank you, Tom

  Hi Tom,

  the procedure to change the password for the listener of glassfish server hosting APEX

  ... more like a topic related to GlassFish for me. I guess you will get the best answers to these questions in a GlassFish related forum...

  For what it's worth, I'll try my best even when:

  Can not run the program "keytool": java.io.IOException: error = 2, no such file or directory

  This seems to be a pretty clear error message: keytool , which probably is used to manage keys for users of GlassFish, was not found. This means, you are either running on an operating system that is not officially certified for GlassFish, or you GlassFish has not been configured correctly.
  You have run

  GlassFish@ahost:/opt/glassfish3/GlassFish/Domains/mydom01/config > which java
  / usr/bin/Java

  ... which means that you assume your GlassFish runs without being set JAVA_HOME. If that's true, I'm install you GlassFish correctly from this setting.
  Anyway, you have also discovered that

  keytool could be found in/usr/java/latest/bin/keytool.

  ... that is not + / usr / bin + and probably not in the way of global search of the user on whose behalf your GlassFish is running. Then, you can either create a link [*] for c++ / usr/bin/keytool + do (finally) to + / usr/java/more late/bin/keytool +, or you setup JAVA_HOME to be + / usr/java/last +.
  [*] Note that depending on your operating system, there may be more than one stage of indirection, for example my Ubuntu a + / usr/bin/java + pointing on + / etc/alternatives/java + which points on + / usr/lib/jvm/java-6-Sun/jre/bin/java + where + / usr/lib/jvm/java-6-Sun / + points to the directory containing the real JDK to use. You will probably find something like this on your system. My Ubuntu box has a link for + / usr/bin/keytool +, so I get when running "what keytool.

  We need to have that in the path? There is no requirement in the installation guide for that, nor the RPM installation has adjusted the path system accordingly.

  Again, this is not a forum of GlassFish.

  I hope my advice helps you solve your problem. If they are not, please choose the appropriate forum for your next post on this topic. And I guess, giving additional information about your OS and how you manage your JDK (and which version you use) help people here to help you.

  Thank you

  Udo

• Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  See if anything here help: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

• HP solutions Center can not run because your installation of the device is not full (Windows 7)

  I downloaded and tried to install HP Photosmart C309a all-in-One Driver Software 14.0 Rel.5 in a new installation of Windows 7 Professional (not an upgrade). Installation works very well until the moment of the connection to the printer.

  I tried the wired and wireless network connections. The screen "Found network printers" lists the printer with the correct IP address and MAC address. Network Diagnostics screen shows any errors. The screen "Installation of your printer" poster "Detected printer", then says "printer setup has failed to complete." Retry does not help. Removing and reinstalling the software do not help.

  The Windows devices and printers control panel shows the printer as "Series of HP Photosmart C309a (redirect 2)". I am able to print a Test Page from Windows printer without error. The 'print options' are also available.

  The printer works fine with other computers on my home network, one running XP and a Vista running.

  How can I get the software installation to complete successfully and provide the printer the HP Solutions Center?

  Thanks for your help.

  Well, I have solved my problem. I'm not sure that these steps are necessary, but here's what I did.

  1 follow the instructions in "Completely uninstall and reinstall the HP software" HP. In particular, 'clear the temporary files and folders' and 'Disable Terminate and Stay Resident (TSR) programs and any other lighting programs' before reinstall you, then "Reactivate startup programs", after the reinstallation.

  2. install base drivers, and NOT the complete software package with applications.

  3. If the basic install works, then install ALL the applications (eg Solution Center). Do not try to install some applications but not others.

  4 remove the applications that you do not (e.g., Online Shop).

  Maybe the steps 2-4 are not mandatory, but they worked for me.

• Can not run the demo of StarCraft or downloaded files

  It is not just drop the files basically downloaded everything as downloaded demos... I can't run the DEMO of StarCraft for example, even on here, if I download it. I must have a CD or a DVD-ROM... Its very annoying... Basically, I can't run everything that said (Type: file) he outside, implemented programs.

  Will you suggest try here...

  http://us.Blizzard.com/support/index.XML?locale=en_US&gameId=3

  --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Can not download the PDF installation file

  After the failure of my G4 power, I swapped the hard drive in another G4 an economical alternative to buying a new power supply. C2 did not like that. He spotted the new machine and wanted a re-authentication... which is not Adobe, as we now know.

  So, I am trying to download the new files... and find that I can't download the PDF installation.

  Same problem? After I clicked on the PDF file (at the top of the list of the downloadable), asked me to specify an application to open. Duh... I sailed to Adobe Reader and clicked on it - and got a blank white page with the url of the PDF file in the upper part. Nothing else. -Nothing else. -Nothing else.

  If you mean by reauthentication, he asked to enter a serial number, Adobe does that.  They demand it.  You are allowed to install your software on two machines, so you should be able to get re - authenticate the software with your serial number of initial installation, as long that you only installed on one machine.

  If you had already installed on both machines, you can contact the Support from Adobe to fix things to eliminate lost activation.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Had to replace the motherboard: System does not boot, the XP installation disc runs to a failure.

  Thus, the motherboard in my PC started to die.  I replaced it.  Start-up of the new system has prompted a Safe Mode boot.  Choose Safe Mode, the system restarts after mup.sys.  Choose the last known good startup the initial windows screen appears briefly, then restart the system.  Boot from the original installation disk, all kinds of drivers charge then the last message that appears is loading Windows Executive.  A
  BSOD appears stating something to the effect of an error with the hard drive, verify the presence of virus, remove the new hard disks, etc..  Hard drives is a virus.  So, how do you round a re - install defective and/or repair or a defective Mode start safe mode with new material?

  Thank you

  Hello

  Since you have replaced the motherboard, you may need to reinstall the operating system.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I can not run the most recent version. I get a window saying firefox.exe is not a Win32 file

  I can install the 5.0.1 version but it won't work. I got this version works when someone elso was using my computer. I don't know how it happened, but the calculation froze and I couldn't run Firefox afterwards. I got Firefox to my computer. Downloaded the latest version once again and I tried to run it. I've done several times without success

  It seems that the installation is corrupt.

  Follow these steps.

  1. Go to Download Firefox 5.0.1 and download the installer to your desktop. If necessary, use Internet Explorer to download, but in this case, choose "Save" when you see the prompt. Do not choose "Run"
  2. Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, customizations, etc. (don't tick the box).
  3. Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the installation file downloaded previously on the desktop.

  Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.

  As a precaution, make a backup of your bookmarks as follows:

  1. Press CTRL + SHIFT + B to open the Bookmarks Manager.
  2. Click on the link to import and backup and then click on HTML Export and save the file somewhere.

  You can use this file at any time to restore your bookmarks if that proved necessary. Simply reverse the procedure and choose "Import HTML" instead.

  NB. If you use a download accelerator, turn it off before trying to download Firefox. These utilities are a common cause of corrupt files, in which case you get the error message you mentioned.

  If this suggestion solves the problem for you, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same problem.

  Thank you.

• can not run the program in Windows 7 64 bit xp mode

  I have a problem running a program that runs perfectly OK under Vista 32 bit and XP with sp3, however do not work in virtual XP mode or on a WIN7 64 bit system.

  I uninstalled XP mode and made a new installation with no luck.

  Went into the tab compatibility properties and selected OS, he worked under.  (Which was XP sp3 and Vista SP1)  Did not work.

  In XP Mode, the program launches but does not see the USB stick files are on, he needs to interface with.

  In Win7, the program launches and can see the USB files are on... but wont interface with them.  Messsage says "another program can use this disk.

  As the program is running in XP systems, which prevent to in Virtual XP in Windows 7.

  Any help is appreciated!  Thanks in advance.

  Hello

  I suggest you to ask your question at the following link.

  Windows Virtual PC and XP Mode

• Can not run the upgrade of Mavericks from the App store

  I have an old iMac, I'm trying to update and I can't get the upgrade of the Mavericks to run from the App Store. It's an iMac 7.1. I upgraded manually it 10.5. ? to 10.6.8. I then went to updates in the app store. Mavericks and El Capitan have been listed. I've tried both but got the same message:

  "We could not complete your request. There was an error in the App Store. Please try again later (4)"

  I can't believe there is a problem with the app store, so does anyone have an idea what could be wrong?

  Thank you

  John

  Try to connect to the App Store and log in again.

• Can not run the executable file by LV7.1

  Hi all

  I'm surprised, I can't build and run the executable file LV7.1.

  I used to write a few vi with LV7.1 and built the executable according to these vi. It was no problem to build and run this executable file at that time. Now I can open these vi well with LV7.1, bu I can't run this executable file, it will be a mistake, please refer to the attachment. I'm trying to compile an executable file according to a simple vi, and then I can't run this exe file much more.

  Can you help me solve this problem? Thank you in advance.

  Evan

  @Christian: this is not correct.

  One of the reasons to do this is if LV 7.1.1 is installed, and then you install an application, including the runtime engine built in 7.1. It corrupts the execution engine.

  See here: http://digital.ni.com/public.nsf/allkb/680E61A4D02158A186256F7A0073C228

  Daniel

• I can not run the sample ' weather guesser "on the Simulator on the Simulator.

  Hello
  I can't run this example on the BB10 Simulator.
  When I build the other samples of this function.
  I think that the IDE generates for a device but not for Simulator

  Here's what I have in the console of generation:

  Generation of the default configuration for the weatherguesser project *.

  all the
  C:/bbndk-10.0.4-beta/host/Win32/x86/usr/bin/qmake-spec not taken into charge/blackberry-armv7le-g ++ o arm/Makefile weatherguesser.pro CONFIG += device
  WARNING: Did not find:... /SRC / *. HPP
  WARNING: Did not find:... /SRC / *. HPP
  C:/bbndk-10.0.4-beta/host/Win32/x86/usr/bin/qmake-spec not taken into charge/blackberry - x 86-g ++ o weatherguesser.pro x 86/Makefile CONFIG += Simulator
  WARNING: Did not find:... /SRC / *. HPP
  WARNING: Did not find:... /SRC / *. HPP
  make - c / arm f all Makefile
  make [1]: Entering directory 'C:/ndk-10.0.4-workspace-lundi-aprem/weatherguesser/arm '.
  make-f Makefile.Release all
  make [2]: Entering directory 'C:/ndk-10.0.4-workspace-lundi-aprem/weatherguesser/arm '.
  make [2]: nothing to do 'all '.
  make [2]: leaving directory 'C:/ndk-10.0.4-workspace-lundi-aprem/weatherguesser/arm '.
  make-f Makefile.Debug all
  make [2]: Entering directory 'C:/ndk-10.0.4-workspace-lundi-aprem/weatherguesser/arm '.
  make [2]: nothing to do 'all '.
  make [2]: leaving directory 'C:/ndk-10.0.4-workspace-lundi-aprem/weatherguesser/arm '.
  make [1]: leaving directory 'C:/ndk-10.0.4-workspace-lundi-aprem/weatherguesser/arm '.

  Build completed *.

  Thank you for your help

  For some reason, the generation of Simulator orders are commented in the weatherguesser sample in the Makefile:

  simulator:
  # No x86 version of cascades available, yet.
  #   $(MAKE) -C ./x86 -f Makefile all
  
  Simulator-Debug: Makefile
  # No x86 version of cascades available, yet.
  #   $(MAKE) -C ./x86 -f Makefile debug
  

  Simply uncomment the lines so it looks like this:

  simulator:
  # No x86 version of cascades available, yet.
      $(MAKE) -C ./x86 -f Makefile all
  
  Simulator-Debug: Makefile
  # No x86 version of cascades available, yet.
      $(MAKE) -C ./x86 -f Makefile debug
  

• Can not find the download / installation package for Services of ripple.

  I see a lot of posts talking about the fact that I should just "start and run the services of ripple" to test and debug my app phonegap/cordova.

  I can not however for the life of me figure out how to start waving services.

  It is not in /program files/ripple, this isn't in program files/research in motion/ripple

  I've never seen or downloaded a specific package to the ripple.

  There is nothing called ripple - services.bat in one of the directories of SDK WebWorks 2.3.1.5 \BlackBerry.

  the CRX ripple file does not install in chrome, if I drag on--but I could get through the chrome Web store.

  I'm hosting the site via APACHE, but none of my plugins are testable in ripple which means that I have to run the Simulator (slow) or (slower) charging for all debugging device... What is worse is that I cannot debug any javascript except in chrome... which means since I can't access one of the plugins (barcode scanner (, a home-rolled prepared by myself), I have no idea what's going on.

  Can someone help me find links to what I'm missing?

  To install the CRX, you need to drag onto the page to chrome://extensions

  Once you do this, you should have a ripple the button to the right of your address bar. Go to the page in question and click the button.

  I hope you get closer!

• Can not run the test stimulus plan

  Hi all

  We have 3 ESX 4.0 for each of sites using MRS for failover and us using EMC CLARiiON CX4-240 to store data with MirrorView/A

  Before we have been successful with failover and failback, but sice I added more VMs with raw LUN address and try again to run the recovery test and then not qualified, we have received a message: "error: prepare storage access to perform the operation was refused.

  Please recommend to me what the problem is to fix

  Thanks and greetings

  Pham Duke of

  Can you please send your recent SRM error log?