Can not scan using my Photosmart 2610 Scan button on 10.6 Snow Leopard

Similar Questions

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• can not get the color option in the dialog box print in snow leopard w/epson

  I upgraded to snow leopard and then updated

  my printer epson 595 driver. but when I go to print, the print dialog box print settings has no color option. It is grayed - out any of my old settings or type of paper I use.  called Epson and they had opened something in preview.  I have the color option, they say it's a prob of pshop.  any ideas?

  

  Well, for a 'proper' color workflow, when you choose Photoshop to manage colors (and select the correct destination profile) you are supposed to choose without color management in the Epson driver. (which is now indicated by the parameter of color being disabled... I guess) there are a number of sites that go through the steps of printing from Photoshop for an Epson, but I don't know if they have this covered new behavior.

  http://www.gballard.NET/NCA.html

  http://www.russellbrown.com/tips_tech.html

  http://www.computer-darkroom.com/ps12_colour/ps12_1.htm

• All-in-one HP Photosmart C6280 not connected to the internet, and can not scan to computer

  My HP Photosmart C6280 all-in-one not connected to the internet, and can not scan to the computer.  I got it for a few years and must plugged into my Macbook to print, but now I want to use it to scan photos directly to my computer.  Can someone help me to do this?  Much appreciated!  (Not sure where are my original softward records!)

  Oh, OK, well this isn't probably the problem, but for good measure, you should get the latest version of the software for your printer from the "support & drivers" link at the top of this page.

  In the meantime, we will reset the printing system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Top of the window, Select the default tab . Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Photosmart 7520 e ALL-IN-ONE: can not scan to e-mail BLAH display panel eprint photosmart 7520 e all-in-one

  my printer can not scan to e-mail to printer display panel in the months ago very well but right now not working it says unable to connect to web services (work wireless) how fix it please help

  How to check it

• OfficeJet Pro 8620: can not scan from my printer on my computer

  Hello. My computer recently downloaded windows 10 and since then I can not scan from my printer to my computer (although I can scan my computer on my printer).  I get the following error message (and hp scan doctor found no problems): "the analysis could not be performed because of one or more of the following problems: - computer connection is lost, the application of scanning the computer is currently in use, OCR application - is not installed on the computer.

  Is there a way to fix this?

  Thank you!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  Once you have installed the software,

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)
  

  

  Hope that helps.

• OfficeJet Pro 8600 pro, I can not scan to a NAS or my linux box. The error of the Linux box is:

  OfficeJet Pro 8600 pro, I can not scan to a NAS or my linux box.  Web browser for the Linux of the error box is: "you can't use this feature because it has been disabled."  For more information, contact your network administrator or the person who set up the printer. When I try to send the file to a NAS by IP address, password, and account name it tells me that the file is not found.  I can get on the site by copying the ip address and the path to my dir browser.

  In the Linux box, I can print to the printer.

  Sorry, but HP does not support the Linux operating system.  The only thing that HP offers for Linux support can be found here.

• HP Officejet 150: Can not scan wireless

  I have a HP all-in-ONE Officejet 150 and that you are unable to scan wireless.  Right now, I can't even the bluetooth icon to turn blue, although it said that the radio is on.  I took my old printer because of such problems.  I handed to factory, combined with my Sony computer, but it does not recognize my computer.  Suggestions?  I can use a cable and get it to the scan, but that defeats the purpose of bluetooth technology.

  Hi @Dragonbebe,

  Welcome to the HP Forums!

  I understand that you can not scan wireless with your mobile printer HP Officejet 150. I'm happy to discuss this issue for you!

  This printer can only scan with the printer cable USB is plugged. As the wireless Bluetooth connection is strictly to be printed. Please see the user's Guide, for more information your printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• HP envy 5532: can not scan from my hp envy 5532 to my PC.

  message says that the computer is not responding, check the USB and wireless works, both work. As this printer did not come with a USB, I used one of my old lexmark printer. Help I can not scan from printer to pc.

  Hello! Welcome to the forum @scoobby

  I posted a troubleshooting guide for you to try below, for the problem you are having with the scan on your computer. Afterwards, you should be scanning the image!

  An error 'the computer is not responding' for HP ENVY 5530 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 4510 Printer series

  Good luck

• Can not scan (HP Scanjet G4010) for printer (HP Deskjet 6980) since my Mac OSX 10.9.2 update

  Hi, since the update my Mac OSX 10.9.2, I can not scan to the printer. When I look at 'Printers and Scanners' under ' preferences system, the printer is (HP Deskjet 6980), but not the scanner (HP Scanjet 4010) and I can not add the scanner to the list. " I am able to print items off the computer, but cannot scan and print. When I printed a report on the printer page, it says that it its status is "offline." Any suggestions?         Thank you!

  Hi there Bulldogs3, welcome to the forums!

  I saw that you encounter a problem when you try to add your Scanjet G4010 to your Mac up-to-date 10.9.2. If you have not yet downloaded the installation for the Scanjet, please do it here: HP Scanjet ICA software for Mac OS X 10.6, 10.7, 10.8 or 10.9.

  If that is not always do the trick, follow these 2 steps and add the printer and back scanjet.

  1 mac OS x: how to reset the printing system

  2. repair disk permissions

  I hope that helps you.

  Good luck

• HP 6500 has more than 4 in 1 machine can not scan wireless in Vista

  I can not scan from my HP 6500 a Plus 4 in 1 machine to my computer wireless wireless running Vista Home premium (64-bit). HP technical support says that the problem is with the function of WIA scan on my computer. Any help would be appreciated

  * original title - can 't scan from my HP 6500 wireless has more than 4 in 1 machine. According to HP, the problem is with the function of WIA scan on computer (Windows Vista). Any information would be appreciated *.

  Hello

  Uninstall and reinstall the HP scan utility and check if this solves the problem.

  You can download it from this link:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3795406&

• To print from the computer, but can not scan from printer to computer. Tried everything. Disconnected power supply, etc, nothing works.

  Have no problem when you print a document from the computer. Can not scan from printer to computer. I don't know that I've scanned because I went from windows 7 to 10. Printer not repeat myself found computer.

  Hi, Rolland,.

  Welcome to the Microsoft community. I might help you.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the scanner?

  2. Do you get any error messages? If Yes, what is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupted driver.

  2. Hardware problem.

  Method 1:
  I suggest you to run hardware store and check if it helps.

  (a) press the Windows keyboard.

  (b) Troubleshooting type in the search box and press enter.
  (c) click on material and audio.

  (d) click on hardware and devices and follow the on-screen instructions.

  Method 2:
  If the problem persists, I suggest you to download and install the latest scanner driver\software on the manufacturer's Web site.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• can not be used to unlock this iPhone. !!!! What should I do?

  can not be used to unlock this iPhone. !!!! What should I do? This message appears when I type my apple ID: SCOTT its my work laptop I neeedddd help urgenttttttttttttttttttttttttttttttttttttttttt

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• I bought an ipad. Now I can not to use it because it is locked in icloud. I don't know who is the seller.

  I bought an ipad. Now I can not to use it because it is locked in icloud. I don't know the seller. What can I do?

  If an opportunity iOS device has been "Locked Activation" then only the former owner can unlock, either by providing you with the account ID and password, either by removing it from its list of devices (as it should have before selling) s ' please see http://support.apple.com/kb/ts4515

  If you are unable to contact to do this, then I'm afraid you will not be able to use the device - there is no other way to release all. Apple cannot open it for you.

  If possible, you should return whenever you bought it and ask a refund as this event that the unit is completely useless.

• When I try to insert key it says its the key by default and can not be used. Sticker on the bottom of my laptop is all cleared off the coast.

  I recently installed Linux, now I have installed Windows 7 Hp 36 bit now when I try to insert my key it says its the key by default and can not be used. To make it better. My sticker on the bottom of my laptop is all set off but I Got the serial number and product and model. What should I do?

  I did install the ISO wrong or my key has expired?

  You can't just use any key, the product key for your computer is unique. If the product key on the COA sticker at the bottom of your laptop is damaged, you will need to purchase a new product key for Windows 7 Edition Home Premium and use:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key