Can not scan wireless between mac and photosmart 7515

Similar Questions

• HP Officejet 150: Can not scan wireless

  I have a HP all-in-ONE Officejet 150 and that you are unable to scan wireless.  Right now, I can't even the bluetooth icon to turn blue, although it said that the radio is on.  I took my old printer because of such problems.  I handed to factory, combined with my Sony computer, but it does not recognize my computer.  Suggestions?  I can use a cable and get it to the scan, but that defeats the purpose of bluetooth technology.

  Hi @Dragonbebe,

  Welcome to the HP Forums!

  I understand that you can not scan wireless with your mobile printer HP Officejet 150. I'm happy to discuss this issue for you!

  This printer can only scan with the printer cable USB is plugged. As the wireless Bluetooth connection is strictly to be printed. Please see the user's Guide, for more information your printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• Do not click on in the VM and can not move files between hosts and virtual

  Do not click on in the VM and can not move files between hosts and virtual

  Home - Windows XP x 64 Edition

  Virtual - Windows 2003 Web Edition

  -vmware.log

  ...

  sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
  sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
  sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
  sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
  sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

  ...

  Any ideas?

  Thank you

  If your license key allows, update your VMware Workstation version 7.1.4

  Otherwise, at least upgrade your VMware Workstation to version 7.0.1

  In the menu bar, help-> Check for Updates on the Web.

• HP 6500 has more than 4 in 1 machine can not scan wireless in Vista

  I can not scan from my HP 6500 a Plus 4 in 1 machine to my computer wireless wireless running Vista Home premium (64-bit). HP technical support says that the problem is with the function of WIA scan on my computer. Any help would be appreciated

  * original title - can 't scan from my HP 6500 wireless has more than 4 in 1 machine. According to HP, the problem is with the function of WIA scan on computer (Windows Vista). Any information would be appreciated *.

  Hello

  Uninstall and reinstall the HP scan utility and check if this solves the problem.

  You can download it from this link:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&product=3795406&

• Can not scan wireless Photosmart Premium C410A

  My C410A runs well wireless for all functions except scanning. It will not respond to a command to scan wireless. Support long sessions with HP and Microsoft Netgear (mfr-router) have failed to identify the source of effective workaround of prob. has been to use the USB connection for the scan only function. Everyone knows the inability even to scan wireless?

  Problem solved after three hours on the phone with HP technicians yesterday and today. Bottom line: the signal from my router Netgear Wireless-G (WGR614v10) is not enough to support stable wireless scanning, and therefore the permanent solution is to scan to my HP C410A only via the USB connection. A secondary issue was my inability to scan from my second printer, a HP all-in-one Photosmart 3210. Technology concluded that, because of the presence of the solution Center for the C410A, the scan of 3210's function, which depends on a previous Solution Center version much (v7), could not coexist on the same computer. So, the solution to this issue is simply to use the 3210 for everything except scanning.

  Thanks for your efforts. Detective Conan.

• ASUS computer: can not scan wireless because I've upgraded to windows 10

  Since I've upgraded to Windows 10 on my Asus computer, I can not connect through the HP Solution Center to scan.  I have a HP computer I upgraded to 10 and everything works fine.  I'm using version 14 of the softward.

  If I wired my computer to the printer, I can scan, but can't scan remotely.

  Can someone help me!

  Hi @Lorraine9,

  Thanks for getting back to me.

  There is corruption in Windows. It is possible that the printer driver has been corrupted, so we will need to remove it and reinstall.

  First, try the steps in this guide:

  • HP printers - printer problems after upgrade to Windows 10

  If the problem persists, follow the steps below to see if you can solve the problem.

  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10

  • Perform the clean boot in Windows 10 / 8 / 7

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding:

  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Remove printer drivers and reinstall:

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:
  1. click on the Start button
  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".
  3. click on programs and features to launch the window.
  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your HP Photosmart if you see that your HP Photosmart listed, click on it and choose uninstall.
  5 follow the prompts on the screen to complete the uninstallation. Once the uninstallation is completed successfully, please close the programs and features.
  6. then click again on the start menu
  7. this time, type devices
  8. click on devices and printers to open the window.
  9. in devices and printers are looking for your HP Photosmart camera. If you see if please right-click on it and choose 'Remove' or 'delete '.
  10. Once your HP Photosmart camera is like showing in devices and printers please click on any device under the list printers once just to highlight. Click on the above print server properties
  11. click on the tab drivers
  12. search for your HP Photosmart driver. If the list, please click it and choose Delete
  13. select Remove Driver only
  14. Select OK
  15. click apply and then OK in the print server properties window.
  16. close the devices and printers.

  Please proceed to the next step.

  Step 2: Install the device:
  Please click here to download the full functionality of the software and the driver for your printer when the download is complete, follow the guests on the screen to install your printer.

  If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect.

  Once installation is complete, please try printing and scanning.
  Source published by my colleague @X-23.

  If the problem persists, continue.

  • Make sure all Windows updates are updated on the computer.

  Then try to open the hidden administrator account and try to reinstall.

  • How to enable the hidden administrator account Windows 10

  If the problem persists, create a new user profile and try again.

  • How to create a new Local user account in Windows 10

  If the problem persists, you may need to reinstall Windows 10

  I hope this helps. Please reply to this message with the results.

• Can not scan wireless to the printer to the computer

  I can't scan my Photosmart Wireless B110 printer wireless to my laptop using Windows 7 IE. I can scan wireless using the laptop, which shows that the system can work. It allows to analyze all right, but it just stopped and I tried everything I can find on the site of HP. I deleted the printer and that restored it and I uninstalled all the software and tried to reinstall it but kept getting fatal error message saying that there is a newer version of the same software already on my computer, even though I had removed everything I could find with the name of HP on this subject!

  A specific problem seems to be that the laptop will not recognize the IP address of the printer so that every convenience store programs think that the printer is not installed so I can print wireless from laptop and scan also. I would appreciate your help to be able to scan from the printer and hopefully discover why the IP address is not recognized.

  Thank you for your answer fast (I'm not used to it as you can see from my previous posts!).

  I got the same error message when I pressed the icon Apps so I went to reset the static IP address, as you suggest. The box that says 'Suggests a manual IP' is grayed out so I gave the IP as it was. Then, I moved the section DNS server under which I had left empty as suggested in the other post I had followed. I put the 8s and 4S who told you and now it works perfectly.

  Thanks a lot for your help. He needed only two positions experienced to get my printer working again but I had to wait a long time before you me is reached. There must be a lesson there for HP to take on board. In any case thanks a lot again. I gave fame and marked the post as solved.

• MX410 does not scan wireless using Mac

  Hello

  Recently, I was forced to create a new user on my Mac (OSX Yosemite), and since then the scanner on my MX410 does not work wireless. I get the message:

  Cannot scan for these reasons:

  -Scanning is off.

  USB - cable is disconnected.

  Please check and try again.

  Scanner driver will be closed.

  2.156.0

  If I change users for older users, it works very well. If I go into System Pref/Printers & Scanners/Scan/Open Scanner it scans very well wireless.

  Any suggestions or recommendations?

  Thank you

  Using Navigator MP EX or ImageCapture? If you use MP Navigator, make sure you check the settings on the new users to make sure that it is looking for the network version of the scanner.

  http://kbsupport.Cusa.Canon.com/system/selfservice.controller?configuration=1011&PARTITION_ID=1&SECU...

• Dell Inspiron 1545: Can not scan wireless for my laptop

  I have a Dell Laptop Inspiron 1545 it is my main computer. I also have a Dell Dimension 4600 series desk top that I use very rarely. My HP printer D110 all-in-one is set up for these two. My problem is that I can't scan to the Dell Inspiron 1545 laptop wireless to the printer. When I try the following message appears on the printer screen: try to may computer or see the documentation press OK.

  The last time I used the top of desk, which was a year ago, I was able to scan to it from the printer. However, I think that the printer and the computer are connected, but am not certain. I am able to print wireless from the Dell Inspiron 1545 to the printer without any problems.

  I have DSL.

  Any help is very appreciated.

  Thank you

  Hi @BlackSheepFan,

  From your description, I think it would be better to remove the software, clean up a bit of the computer, and then reinstall the software. Please complete all of the steps below in the order and let me know the results.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• I have Deskjet 3070, I can not scan from my laptop and therefore have the ability to scan to a PDF file

  In addition, I can view ink settings and other features of the printer and scanner. The printer and the scanner works perfectly fine, but the elements analysed are beingsaved as JPEG, rather than PDF files where I can create a paginated document a lot if necessary

  Hello

  Please clarify your intent with can't scan from the laptop.

  Any error speciifc or behavior?

  What operating system, what type of connection?

  Shlomi

• can not scan using my Mac... frustrated!

  I have HP Photosmart C7180 all-in-one printing. Everything works but the scanner. I got an error message stating: "Sorry, an unknown error has occurred" before I'm gone to the site and downloaded the update to Snow Leopard 10.6.5. After downloading, I get an error message stating: "sorry, scanner could not be initialized (scanner not found). '. I have lost my installation CD to do a complete reinstall. What should I do?

  If you are using Snow Leopard and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded), you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• To cut and paste between Mac and Virtual Machine

  My husband and I have VMware Fusion installed on our MacBooks. We use it to run WIndows XP.

  His continues to have problems. Windows crash then left outstanding programs. Now, he can not copy / paste between Mac and Virtual Machine.

  I can't find all the differences in our backgrounds. I'm not having problems he knows.

  Any advice on how to solve this problem, so it can copy / paste between systems again?

  Assuming that the MAC is stable and not giving any problems I try and see why the XP VM crashes and at least re - install VMWare Tools on XP because that is what is needed to copy and paste between host and guest operating system.

  Look in XP Event Viewer to see if you can see what happens wrong... Click Start and then right-click my computer and then click on manage, and then click Event Viewer.

  Perpahs try running a virus scanner or applications malicious XP if you think that it might be infected.

  If all else fails, try and repair the machine virtual XP from your XP CD...

• All-in-one HP Photosmart C6280 not connected to the internet, and can not scan to computer

  My HP Photosmart C6280 all-in-one not connected to the internet, and can not scan to the computer.  I got it for a few years and must plugged into my Macbook to print, but now I want to use it to scan photos directly to my computer.  Can someone help me to do this?  Much appreciated!  (Not sure where are my original softward records!)

  Oh, OK, well this isn't probably the problem, but for good measure, you should get the latest version of the software for your printer from the "support & drivers" link at the top of this page.

  In the meantime, we will reset the printing system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Top of the window, Select the default tab . Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Workaround for users Mac OSX 10.9.4 that can not scan

  Recently, I upgraded my Mac Mini with OSX 10.9.4 and were unable to scan using the Scan button on the printer all-in-one Deskjet 4400 (I've updated all my Apple software). I accidentally found that if I go to System Preferences and click on printers and Scanners, I can click Scan then open Scanner and can scan from there.

  It is not the easiest way to analyze, but at least I am able to scan. Hope HP will soon find a way that it will work only with the Scan button on the printer.

  Hello

  Full features software is not available for your printer for OS X Mavericks, I regret to inform you that such an is only available for newer models and won't be available for your printer.

  Scan from the front panel only is not supported on the operating system, but only through Capture of Image, preview or Printers Scanners & in the following document:

  http://support.HP.com/us-en/document/c03967506

  Kind regards

  Shlomi

• Can not scan (HP Scanjet G4010) for printer (HP Deskjet 6980) since my Mac OSX 10.9.2 update

  Hi, since the update my Mac OSX 10.9.2, I can not scan to the printer. When I look at 'Printers and Scanners' under ' preferences system, the printer is (HP Deskjet 6980), but not the scanner (HP Scanjet 4010) and I can not add the scanner to the list. " I am able to print items off the computer, but cannot scan and print. When I printed a report on the printer page, it says that it its status is "offline." Any suggestions?         Thank you!

  Hi there Bulldogs3, welcome to the forums!

  I saw that you encounter a problem when you try to add your Scanjet G4010 to your Mac up-to-date 10.9.2. If you have not yet downloaded the installation for the Scanjet, please do it here: HP Scanjet ICA software for Mac OS X 10.6, 10.7, 10.8 or 10.9.

  If that is not always do the trick, follow these 2 steps and add the printer and back scanjet.

  1 mac OS x: how to reset the printing system

  2. repair disk permissions

  I hope that helps you.

  Good luck