Can not start my Satellite L305D-S5940

My laptop is Toshiba Satellite L305D-S5940 with Windows Vista Home Premium. The following message comes when I try to start it.

Windows could not start. A recent hardware or software change might be the cause. For fox the problem:
1. Insert your windows installation disc and restart your computer.
2. Select language settings and then click on "next".
3. click on "repair your computer".

If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred trying to read the boot configuration data.

Unfortunately, I do not have the windows installation disc. What am I supposed to do? I can't access "safe mode" by pressing F8. I'd be grateful if someone helped me feed my computer please.

Now, it's quite complicated especially if you cannot boot your laptop in safe mode.
I'm afraid you may not do much and best and solution the easiest would be to new installation OS m.

You don t have the windows installation disc, but you maybe DVD recovery?

Tags: Toshiba

Similar Questions

  • Can not start my Satellite Pro A10

    I have a Toshiba laptop Satellite Pro A10. When he tries to start windows, it comes up with the "We apologize for the inconvenience, but windows did not start successfully" etc. I tried all the options for example

    Start:
    Safe mode
    Safe mode with networking
    Safe mode with command prompt
    Last known good configuration
    etc.

    None of the options works. All I get is a flow of information about drivers and it then hangs. The last driver in the list is:

    multi (0) disk (0) partition (1) \WINDOWS\System32\Drive rs\Mup.sys

    I can't clear the checkpoint.

    Unfortunately, I can't find the disc that came with the laptop, so I'm well and truly stuck.

    Any suggestions?

    See you soon

    HI Leon,

    It is quite normal that there is a list of drivers displayed when you try to boot into 'safe' mode However, if initialization fails, obviously there is a problem with your operating system and your only options are to try to fix the problem by using the recovery console (you will need to boot from a CD of original Microsoft installation), or you can restore the original Toshiba CD recovery full operating system.
    A third possibility would be to start with a utility such as Norton Ghost or Acronis image backup/restore and restore a backup previously taken by an external device.

    The simplest option is to restore from a backup that is already taken, but if you don't then you would be better restore from the recovery CD Toshiba you can get at any Toshiba authorized Service partner.

    Kind regards

  • Can not start my Satellite A10

    Hello / I have problem whith my laptop... it's not started windows system / / I see only the toshiba logo...
    Maybe someone knows how to load computer whith my recovery cd?

    Hi Sergei,

    To boot from the recovery CD: -.

    1 insert a CD into the CD-ROM drive

    2. turn on the laptop while pressing the CD key until the phone beeps.

    3. follow the on-screen instructions to restore your operating system.

    As an alternative to the above, you can also press the PF12 key during the feeding sequence and this should allow you to choose the CD-ROM as boot device.

    Best wishes

  • I can't start with Satellite P10 by pressing the power button more

    I can't start my Satellite P10 by pressing the power button more.
    Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

    I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

    So it must be a problem with the key.
    No idea what to do?

    Thanks for any help

    The best.

    Tobias

    If it s a button or a power supply electronic problem, then you can't do anything.
    In this case assistance by the technicians of laptop would be necessary.

    But the next time that you should try this option if the laptop turns on not;
    Remove the battery and unplug the AC adapter from the laptop for about 30 min.

    After this short period of time to reconnect the two parts and check if the laptop could start.

    Good luck

  • Can not start, help!

    Hello

    I use 16 G WiFi touchpad, I can not start my device, it's just to see the HP logo only, I think that my WebOS is dead, how can I get the OS and reinstall?

    Hello Refale,

    to restore your device, you will need to use the webOS Doctor tool. To access the webOS Doctor tool, you will need to go to http://www.hpwebos.com/account and sign in. Then, click on the Options button of the device next to your keyboard and click on Get webOS Doctor.

    There is a link on the site, in case you forgot your password.

    If it's still a no go. You can take a look at webOS Internals Web site. They have a list of addresses to download for all doctors to webOS.

  • Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade

    Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade.

    The only option I have found is to click again on the download button, but the circle of download rest bike for a long time and ultimately that nothing happens.

    See if that helps...

    Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.

  • can not start any other os that mac os install dvd

    I can not start any version of windows or ubuntu on my mac pro 1.1.

    Tried:

    Windows 98

    Windows 2000 Professional

    Windows 2008 Server

    Windows XP home

    versions of Windows 7 Professional 32 & 64

    Ubuntu 10.04 lts 32-bit

    Ubuntu 14.04 32-bit and 64-bit

    most will show a cd when you hold down the ALT to start up

    and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.

    searching the Internet, it seems many people have this problem.

    Details of my machine:

    Model name: Mac Pro

    Model identifier: MacPro1, 1

    Name of the processor: Dual-Core Intel Xeon

    Processor speed: 3 GHz

    Number of processors: 2

    Total number of Cores: 4

    L2 Cache (per CPU): 4 MB

    Memory: 16 GB

    Bus speed: 1.33 GHz

    Boot ROM version: MP11.005D.B00

    Version of the SCM (System): 1.7f10

    Chipset model: NVIDIA GeForce 7300 GT

    Type: GPU

    Bus: PCIe

    Slot: Slot-1

    The PCIe track width: x 16

    VRAM (Total): 256 MB

    Provider: NVIDIA (0x10de)

    Device ID: 0 x 0393

    Revision ID: 0x00a1

    ROM revision: 3011


    The system version: Mac OS X 10.7.5 (11 G 63)

    Kernel version: Darwin 11.4.2

    Boot volume: OSX

    Boot Mode: Normal

    Ensure the virtual memory: enabled

    64-bit kernel and Extensions: No.

    We window directly on the hardware, you must install via Boot Camp

    http://www.Apple.com/support/Bootcamp/

    a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.

    The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/

    http://Forum.Netkas.org/index.php?topic=1123.90

    Also:

    https://help.Ubuntu.com/community/MacPro

    http://AskUbuntu.com/questions/507354/how-to-install-Ubuntu-14-04-on-my-Mac-Pro-1-1-with-a-raw-hard-drive-by-a-bootabl

  • I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

    I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

    You can repair XP or try the following:
    http://support.Microsoft.com/kb/917964
    http://support.Microsoft.com/kb/307545

    TO

    Re - install http://support.microsoft.com/kb/978788

  • Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

    I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

    The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

    Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

    Any ideas on this would be greatly appreciated.

    Hi NuWaveDC,

    Thank you for taking the time to post on the Microsoft answers Forums.

    Please see the following article for an explanation of this error code 10.

    Explanation of error codes generated by Device Manager

    http://support.Microsoft.com/kb/310123

    Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

    Please post back to let us know if this information was useful or not, so that we can help you if need be.

    Robyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BITS can not start (error 80246008), tried to solve it, received error 1079, please help.

    Hello

    I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!

    I tried to solve it using the steps suggested,

    It's what you tried, if not, please do it might help

    See if anything here helps.

    Error 1079: the account specified for this service is different from the account specified for other services running in the same process

    If you receive this error message, follow these steps:

    1. Click Start, click Run, type services.mscand click OK

    2. double-click on Background Intelligent Transfer Service.

    3. click on the tab to open a session.

    4. click Local System account and then click OK.

    5. right click on Background Intelligent Transfer Service and then click Start.

    0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed

    because the download manager could not connect the smart Background

    Transfer Service (BITS).

    http://support.Microsoft.com/?kbid=910337>

    You receive an error message when you try to download updates from the

    Windows Update Web site or the Microsoft Update Web site, or when you

    try to start the Background Intelligent Transfer Service 0 x 80246008

    http://support.Microsoft.com/kb/916251>

    An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

    http://support.Microsoft.com/kb/940520

    13:06:42 UTC 08/26/11

  • I have age of empires 3 and I can not start the program.

    Hello

    I have age of empires 3 and I can not start the program.
    The program is installed, but once the autorun.exe appears (with the icons of the game, uninstall, website, out) I click on play and the game does not just start. My computing needs are fairly good for the game because I used to play the game on the same computer later.

    Thanks for your help

    David

    Bink is what plays the scenes cut in many games.

    Installation folder of AOE 3 the binkw32.dll should be in games.
    If it is then it is may be damaged and reinstall the game normally would set the
    problem.

    AutoPatcher.exe - I do not know because I never use auto-patchers with games.
    I have always to download the patch and install manually.
    However, my game has the RockallDLL.dll file.

    I don't really know a good site to lead you to these files.
    You can find a binkw32.dll in another game. Try doing a search of
    Program Files (x 86) (or another location if you install games to the default locations). If you have the file in another game you can copy into your AOE3
    folder of the master installation.

    There was a lot of discussion on these forums about AOE3 so a
    search of these forums may find another suggestion.
    You can also try the specific AOE3 forums-

    Age of Empires Forums - Forums

    Age of Empires III heaven Forum

    .

  • CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

    Hello

    Can someone help on this

    CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

    I just installed esx 4.0 update, one under vmware workstation and get this error

    Try to do this:

    Client-> ESX vSphere / vCenter-> left click on the ESX Server-> Configuration-> advanced-> vmkernel.boot.usenumainfo-> Vmkernel-> uncheck the box (this may require a restart if she does not take effect immediately)

  • Why not start 4090XCDT Satellite with DVD-R/W drive?

    Hello
    I fear I know the answer, but confirmation would be very useful for me!
    Bought a Satellite 4090XCDT opportunity where the former owner has replaced the original CD-ROM with a 2004 Quanta Storage SDW-042 DVD - RW.
    Seems that it was not so smart I have thougth - computer laptop won't boot from CD (BIOS is set to CD-floppy-HDD, of course). So I can't install any system Windows on it. If I insert Windows 2000 boot disks, for example, it reads all the four of them and then said "no CD-ROM not found", probably because no DVD - RW driver is available on the Win2k installation media.

    Is it possible the BIOS since the 1999 (?) Satellite won't be able to boot from the DVD player in 2004 even though the previous owner _had_ installed a Windows 98 that was able to read - but not boot - DVD player? Can I solve the problem to downgrade the drive from DVD - RW to a CD-ROM, the Teac DC-224th (which I believe was the original) or a similar one?

    TIA

    Post edited by: Merkur_1

    > Is it possible the BIOS since the 1999 (?) Satellite won't be able to boot from the DVD drive of 2004 even if the previous owner had installed a Windows 98 that could read - but not start - DVD player?

    Is it possible that the BIOS does not recognize the new CD/DVD drive because of the bad settgins of master/slave/c-salt.
    You should know that not all CD/DVD players are compatible.

    But it could also be a failure of CD/DVD drive and the BIOS does not therefore see the STRANGE news.

  • TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

    Hello

    I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
    I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

    Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

    I am the administrator!

    If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

    I have a Toshiba Satellite U400 and I installed Win XP too.
    I have a user account administrator and Toshiba Power Saver works properly!
    No problem don't like on your system!

    However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

    Check that both are enabled!

    If this doesn't help then reinstalling again this tool.

  • Recovery disk will not start on Satellite 1110

    I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

    So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

    I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

    Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

    Anyone here knows a remedy to this problem?

    (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

    I am in the United Kingdom, and is a UK machine if that makes a difference.

    Hello Micha

    Is this your ODD works properly with the operating system?

    I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.

Maybe you are looking for

  • recover programs after the installation of automatic updates

    Without any warning whatsoever, my computer shuts down as automatic updates are installed. I lose all open windows that I work with. When the computer starts, my session is not restored. Files of works, open photo galleries, etc., don't open as well,

  • old data files of firefox

    I had to reset Firefox 3 times. Whenever I notice a folder of "Old Firefox Data" appear on my desktop with the following figures, following the title. What are these files? What should I do with them? Thank you.

  • Satellite R - resource conflict

    I get 2 resource PCI network controller problems one withbus: device 09: 02 00 function and anotherbus: device 09: 04 00 function And to return to f1 and f2 to Setup have no idea what is wrong help Thank you

  • Equium A60-692 - cannot open the start menu and keyboard problem

    I have a problem starting my laptop A60-692 and I'm not near the points of service. When I push the power button the screen goes through its startup routine gives her marching band welcome charge to the top of my desk.But when I click on the start on

  • installation of WMP11 on windows media center 2002 problem

    I tried to install Windows media player 11 ((WMP11) WMP11) on windows XP media center edition 2002 worm, pass program copy of windows validation and display the following message: "Installation cannot continue, one or more of the following problems h