Can not take the series of laptop HP Pavilion g6-1200 of sleep

Similar Questions

• can I take the ps off laptop and put it on the desk?

  My laptop crashed, we bought a desktop computer, laptop is fixed now but I want to use the Office to edit now can I load the desktop and uninstall it from the laptop or is there another process, I have to go by?

  You can install Ps up to two systems independently of the OS (maybe too well Win/Mac or everyone).

  Kind regards

  Ashutosh

• can not install the driver wifi for my pavilion 1008em g7

  Hi, this is my network controller u can me sent the good driver for wifi adapter? Thank you

  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Hello:

  You need this driver...

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57965.exe

• Can not find the drivers for laptop

  Hello! So I reinstalled windows 7 on my laptop, serial number 584037-001.
  Now I can't find a single driver for it online, except for a site that sells recovery .img files for like $10 a piece.
  Concidering that the laptop is like 2-3 years I have no interest what so ever to put more money on it. And the only driver I need (assumption) unit ths network control.

  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C & REV_00
  PCI\VEN_1814 & DEV_5390 & SUBSYS_1636103C
  PCI\VEN_1814 & DEV_5390 & CC_028000
  PCI\VEN_1814 & DEV_5390 & CC_0280

  This is the ID of the control unit. I frantically searched on this site and many others without a bit of luck.
  I love you, if you find drivers for me!

  Hello

  The driver for the hardware in your first post id is on the following link.

  RALink WLAN Driver.

  All the other drivers you need can be found o Page of the HP product below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5227089#N412

  Kind regards

  DP - K

• WRT54G can not block the Windows 7 laptop

  Use the page Access Restrictions in my WRT54G Router, I am unable to block my Windows 7 laptop, it of MAC address, either by its static IP address.  I have IPv6 disabled in the configuration of the wireless adapter.  However, the laptop is able to access the Internet as if there was no access restriction.  It is the only Windows 7 workstation in the House and the only workstation that I can't block access Internet using Access Restrictions in the router.

  Any ideas would be greatly appreciated.

  The router is a WRT54G v4, which is essentially a WRT54GL.  I've updated firmware to 4.30.13 4.30.5, and that solved the problem.

• BlackBerry smartphones can not connect the torch for laptop

  OK... I downloaded, rebooted, reconnected, clicked, clicked, installed, uninstald and still I can't get my torch to connect to my laptop... Help please...

  This is how, according to RIM:

  http://www.BlackBerry.com/BTSC/KB10144

  I hope that helps you.

• Can not change the brightness of the screen - HP ENVY 17 laptop

  After the upgrade to Windows 8.1, I have the problems below:

  -I can not change the brightness of the screen on my laptop

  -When I clicked "Contact technical support" on HP support assistant program, he showed an error "HP support assistant has stopped working"... and closed the program. I downloaded a new at HP, but the same problem occurred.

  My laptop PC info

  Product name: HP ENVY 17 Notebook PC

  Product number: A9P84UA #ABA

  Please instruct me how to fix it. Thank you.

  I posted the step by step guide here: http://www.tomshardware.com/forum/id-2748304/amd-intel-enduro-laptop-brightness-fix-win.html but if you are familiar with registry just search FeatureTestControl and see if the value is using f840 or f940 and replace it with ffff then restart your computer. should work now. But if you are still having the same problem trying to follow the steps on this post. see you soon!

• can not see the BTH003 on my Qosmio laptop bluetooth headset

  can not see the BTH003 on my Qosmio laptop bluetooth headset

  Hi koko,.

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.

  (1) what is the exact error message / complete you receive?

  (2) what operating system is installed on your computer?

  (3) what is the brand and model of the Bluetooth headset?

  (4) have you made changes on the computer before this problem?

  I suggest you to follow the steps from the links and check if it helps.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• I can not get the latest version of photoshop on my laptop, my office has 20151114.r.301 x 64 my can of laptop ONLY get 20150529.r.88 x 64

  I can not get the latest version of photoshop on my laptop, my office has 20151114.r.301 x 64 my can of laptop ONLY get 20150529.r.88 x 64.

  What gives?

  Hi again,

  Use this link to make a direct download - http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#cc2015

  Concerning

  Rohit

• I used "msconfig, in an attempt to speed up my laptop. I did something wrong and I can not enter the first 13 items, only the trial version. I'm on vacation and he would like you could give me a temporary serial number fo three weeks please. Phil M

  I used "msconfig, in an attempt to speed up my laptop. I did something wrong and I can not enter the first 13 items, only the trial version. I'm on vacation and he would like you could give me a temporary serial number three weeks please. Phil McMillan

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Cannot install Windows XP on my Probook 4520 s in mode ACHI... can not find the correct drivers anywhere!

  Hi all!

  I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:

  -I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...

  -Have these:

  PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.

  PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.

  Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ...  BSOD and reboot even when...

  -tried to find out all the correct drivers, no results...

  -When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.

  Help me please guys, if you can.

  Thanks in advance, Peter

  I had the same problem and now works properly. That's what I did:

  1 position (BIOS) setting to IDE compatible mode

  2. install XPP as usual.

  3. install the drivers for the chipset Intel (sp46692)

  4. download and run softpaq for Intel Matrix Storage Manager (sp45106)

  5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI

  > Port controller 5 series/3400 Series 6 Chipset

  6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.

  7. Select "PCHM SATA AHCI Controller 6 port".

  Windows says it is not compatible, but it will be restarted from the nest

  8 restart the computer, and set its mode controller SATA (BIOS)

  9 complete! Windows does not boot ok

  I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.

  Miguel.

• Re: Satellite P500 of USA - can not read the local DVD

  Hello

  Sorry to appear such a luddite acquired but this laptop great USA from eBay.
  User manual appears to indicate that the player is going to adapt to the locality of the drives I want to play.

  Not had any luck with playback at all to this day, the error message 'not compatible' etc., any guy of suggestions?

  See you soon,.
  Michael

  Hi mate

  I think that the portable player s (optical disc) DVD region is set in the United States and therefore you can not read the DVD released for the European market.

  To resolve this problem, you must change the option of DVD region 2 region.

  My computer-> drive CD / DVD-> properties-> Hardware tab-> choose the CD drive / DVD-> properties-> DVD region

  Notes; You can change this settings ONLY 4 times. After that the parameters is no longer editable.

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.