Can not turn HARD drive restore or create the restore on Satellite A135-S4727 disc
Hello
I have an A135-S4727 (Pentium dual core, 2 GB of ram, windows vista, 160 GB HDD).
Recently, I decided to use my HARD drive recovery funtion to restore OTB ' cos I wasn't satisfied
the way I use my hard drive.
My system did not come with a recovery disk and recovery disc creator software (I checked it when I arrived but)
has been re-insured by the fact that the hidden partition has been and is still intact)
I just thought that I would start from the hard drive recovery console, whenever I needed.
I tried to do this for always (now pressed zero, hit) but it boots to windows in any case.
I am so angry and frustrated rite now ' cos I am out of warranty and do not know why I should come on a forum to find a way to restore my laptop.
I googled the web for 2 days now and nothing other than similar complaints found...
Toshiba... (X-)
The right and the ability to restore its system is a given... (unless you plan to charge us a pc falls down for reasons every time you guys don't even know most of the time)
Please someone end to this nightmare and tell me what to do and how...
Boyfriend sorry but to be honest I put t understand you complaint;
The newest series of laptops is not delivered with the recovery disk but is equipped with Toshiba HDD recovery option.
This option can be used to retrieve the laptop computer from the HARD disk, and there is also an option to create the recovery disk.
This recovery disk can be used if something goes wrong with the HARD drive or partition from the image on the HARD drive.
It s highly recommended to create the recovery DVD!
And this info is in the manual of the user who is always pre-installed on the laptop!
I also found this info here in the user manual that can be consulted online on the Toshiba page we (the Satellite A135-S4727 is a laptop in US)
Check it out here * 56, page of the user guide: *.
[Satellite A135-S4727 Manual: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1757708& rpn = PSAD0U & SelCategorie = 3 & selFamily = 1073768663 & odel selM = 1757708% 7CPSAD0U #]
Here you will find details how to create the recovery disk.
I put t know how you manage a unit bought new but if I buy a new device, then the first I do is consulted the user manual that comes with this device.
In any case; I think you can order a new disc of recovery of the ASP in your country
Good bye
Tags: Toshiba
Similar Questions
-
HP Pavilion dv7-6c95dx: HP Pavilion dv7-6c95dx Windows 7 x 4 Can not find Hard Drive
I have a HP Pavilion dv7-6c95dx. I put in a new hard drive. I can't get Windows 7 x 64 to recognize during the installation. I tried the Intel Chipset drivers on the HP download site for my laptop. I also tried the x 64 drivers from the Intel website: http://downloadmirror.intel.com/24293/a08/f6flpy-x64.zip.
I tried with the original hard drive in and Windows 7 does not recognize either.
Any ideas on how to get Windows 7 to recognize the drive?
Brian
I understood why Windows 7 does not recognize the hard drive. I tried to install Windows 7 from a USB key. I burned the BONES on a dvd and booted on the dvd and he found the hard drive. It is trying to install Windows 7.
-
Installation of Windows 7 - can not find HARD drive
Hello.
I am trying to install Windows 7 Pro. Setup does not find my HARD disk.
I tried loading sata drivers - did not help.
I have run the hard drive test and had no error.
What can I do
My laptop HP G62-b40sw
O.Thankfoalyousuggestion
I'vsolvethproble
thinwindowdidn'semHDbecausoothethaNTFfiletypsyste I... Ext). Don'knoiirealltru
I'vdeletealmpartitionanmakonlonneNTFpartitioaniworkno
Probablit'nothbessolutiobuhavnotheide
-
Original title:
When I start my computer, a message on the screen says I have no hard drive installed. my computer will load eventually after many attempts and when I clicked on my D drive, where all recovery files are kept, it tells me that the disc is damaged and inaccessible. Can someone help me before I'm locked out of the computer for good? Thanks in advance Andy D.
Determine the manufacturer of HD computer. Go to the manufacturer's website and download their software/utility to check the Dowload HD it and burn it to CD or DVD according to the instructions. Boot from the disc newly manufactured. Run the utility to verify. If necessary, replace the HD and restore backups.
Tom Ferguson
-
can not turn on power windows firewall after the expiry of pre-installed McAfee
Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.
New pc, Lenovo Win 7 Professional.
Thank you; Ricky
Did you uninstall McAfee? If not do it first and then try to use the windows firewall.
If still a problem, run the McAfee available here - cleaning tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS101331 -
Photos imported from my iphone came on the side and when I turn and try to save, it won't let me save it like that saying "windows Photo Viewer cannot save changes to this picture because there is a problem with the pictures of file properties". What should I do?
I don't know if the following links answer your question, but
they may be worth a visit:Good luck and * proceed at your own risk *.
FWIW... There is a very long discussion (several pages) to the
following link:Cannot change the imported iPhone 4S photo
https://discussions.Apple.com/thread/3444951?start=0&TSTART=0More Discussion
iPhone 4S image properties is not compartible with Windows?
Editing can be done on the computer due to the error
"Windows Photo Viewer cannot save changes to this picture.
because there is a problem with the properties of the image file".
Any help?
https://discussions.Apple.com/message/17291884#17291884More Discussion:
We cannot turn a few photos in Windows 7 (but can turn others)
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524A simple solution is to open the photos in paint or most other
digital image editor and modify it.Some people have reported success using the following free download
to remove the metadata.Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
http://www.SteelBytes.com/?mid=30&cmd=download&PID=15Here's a way to turn...
Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
the rotator Lossless JPEG free
http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/Free download JPEG Lossless rotating
http://annystudio.com/software/jpeglosslessrotator/ -
Can not find update driver for NVIDIA GeForce Go 7300 on Satellite A200 - 14 d
Hello
I can't find the driver for my graphics card update...
Hello
What driver do you need? A graphic driver XP or Vista?
Have you checked the nVidia page?You will find graphic drivers of the GeForce 7 series
-
Authentic copy does not
I did a reinstall sometimes come back now, he says he wants me to recheck my copy of copy of Windows Vista and I tried but on my computer and on the phone and its does not work.Hi Gary,.
1. what exactly happens when you try to activate a copy of Windows Vista?
2. What is the full error message that you receive?
You can try to check and validate the copy of Windows Vista.
Consult the following link:
What is the validation, and how does it work?
You can also read the following article and check:
-
How can I get dreamweaver 8 on a computer that is not a hard drive?
My computer windows 8 is not a hard drive and I have the CD of Windows 8, but need to understand how to download and get the activation key. Thank you!
Hi Krissych,
Please try the link below to download Dreamweaver.
http://www.Adobe.com/downloads/other-downloads.html
Kind regards
Anand
-
Can not turn Security Center on, error 0 x 80070424
I can not turn on Security Center; I get the Ox80070424 error message. How can I solve this problem?
Hi Lillie B.
I see you get error 0 x 80070424 while trying to turn the Security Center. I'll help you with this problem.
1. What is the brand and model of the computer?
2. what security software is installed on the computer?
3. have you made changes on the computer recently?
Method 1.
I suggest you to consult and follow the steps in this article and check.
Windows Update, error 80070424: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80070424
Method 2.
I suggest you to consult and follow the steps in this article and check.
Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall: http://support.microsoft.com/kb/968002
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
For Windows XP: 322756 (http://support.Microsoft.com/kb/322756/fr/)
For Vista: Back up the registry: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry
Method 3.
I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833
Method 4.
Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
I am trying to upgrade to windows Vista Home Basic to windows 7 ultimate - my western digital not recognized hard driver. When upgrading the hard drive is not in the list of places to install. In addition, the driver is not found.
Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Can not turn on Windows Update
My PC has been infected with XP antivirus2011. I ran Malwarebytes and it cleaned well enough. The only problem is now I can not turn on Windows Update, even via the control panel. Any suggestions?
Hello
1. do you get any error code/message during the installation of the updates?
2. have you done any change in software on the computer lately?We start this problem with running the FixIt in the article below and follow the rest of the methods in the two articles below.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
http://support.Microsoft.com/kb/906602I hope this helps.
-
Hard drive crashed and I can not turn off Lightroom
Hard drive crashed and I can not turn off Lightroom in order to to use on another computer.
Hi johnr.
What version of Lightroom do you use?
If you use the CC version, you can simply install it on any computer (if exceeds the number of activations, you'll be prompted to disable)
If you are using the standalone version, let us know what version do you use?
You can also contact us to contact customer service
Kind regards
Assani
-
I bought standard XI but the download - new laptop is not a hard drive. Can someone please send me a link to download so I can activate with my serial number?
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
- Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Download and installation to Prodesigntools help links are located on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".
-
I have a Macbook Pro which is not a hard drive. How to install Adobe Photoshop elements 11 that came with the Epson scanner, I bought. I registered S/N, and I can't find the free download anywhere alone trials.
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
Maybe you are looking for
-
My HP Photosmart all-in-one (which is only a few months old) stopped communicating with my router Netgear DGN1000 Adsl a few days before Christmas. Instead of the 192.168.0.9 ip address that he used before I turned off the router, ITI is back with an
-
Nokia BH-214 and stereo headset BH-214
Unable to connect to the Nokia BH-214 stereo headset.
-
Lenovo X 1 Yoga (20FQ) clean Windows 10 Pro Install UEFI
Hello I decided to do a clean install of Windows 10 Professional (x 64) on my Lenovo X 1 Yoga (20FQ). I'm currently pulling my hair out trying to install Windows 10 in UEFI mode, I want to do so that I can use all the features of the TPM and bitlocke
-
WRVS4400N slowing down my internet connection of 100 MB
Hello I have a Cisco WRVS4400N on the latest firmware and I just had my Virgin internet connection set to level to the 100 MB. Once I thought it was put at level I checked with a broadband speed test and she is back in the download 15 MB and 5 MB dow
-
How can I get my original installation of return?
I bought an upgrade which was a fake there upgraded me but not turn on how can I pick up my original installation? I have no disks to install it came pre-installed Currys.