Can not turn on the Satellite A60

Similar Questions

• Can not turn on the Satellite M30

  Hello everyone...

  I have a Satellite M30 laptop for time enough and I'm having a problem with it. When I try to turn it on, it makes a kind of scratch noise and then nothing happens. The hard drive lit wrath but the computer does no sound and no picture on the screen. I tried to turn it on with and without the battery and the same thing happens.

  A few days before this happened that I could see the windows startup screen, after that the computer crashed, even when I went to the BIOS Setup screen, the computer also crashed, so the problem was not on the hard disk. A few days later, when I tried to turn it back on, it makes a single probe and nothing else happened. Can it be a motherboard problem? can I try before sending it for repair

  I'm scared of m it s a serious problem.
  Depending on the symptoms that you described the laptop cannot get the message and so I think there may be an error on the motherboard.
  I don t think you will be able to locate the fault. It is simply not possible for the common user like you and me

  If you have no choice as to the request of the service provider for Toshiba for help.

• Satellite L500 - can not turn on the new wireless network card

  I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
  But I can not turn on wifi with FN + f8 key - Windows.

  This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
  Can anyone provide another solution than to change the map?

  PS.
  I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
  PSP.
  I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

  Post edited by: Ipcur

  Hi Ipcur,

  Why you traded with another wireless network card model?

  He works with the wireless network card preinstalled Toshiba?

• Satellite Pro A300D-152 - can not turn on the S-VHS output

  After I installed Windows 7 (32 bit), I can't turn on the S-VHS output (TV).

  Any solution?

  Hi Longhorn_1,

  First of all, you should check if the display driver is installed correctly. This means that in Device Manager it should t be any yellow exclamation point.
  New drivers, you can download from the official page of Toshiba.

  In addition, you use output S-video if you press the FN + F5 key combination.
  Generally you must connect the S-video cable first, before turning on TV/laptop. After that turn on your TV and select the S-video port and then turn on the laptop. FN + F5 key combination to switch between monitors.

• I can not turn off the microphone on Satellite p100-194

  No matter what I do, I can't turn off the microphone of shit, he's always watching on my speakers, I have all the right settings in the sound control panel... believe me!

  Does anyone know how to disable the security...

  * monitor on my speakers even when I uninstalled all the sounddrivers! ... * it seems to be a bios problem... HEEEEELP!

  is there perhaps a bios fix?... or no solution at all on this model, I use win 7 32 bit...

  Hi leon-k,.

  Usually, you can cut the speakers in the Windows sound settings. Go to control panel > hardware and sound > sound.

  Now, choose the recording tab as Akuma written and click Properties > listen. On this tab, you can change the volume and disable the microphone set.

  Check this box!

• Satellite L - he can not turn on the installation of the driver

  Hello

  I bought new laptop having problems:

  Sometimes when I turn on it just flash light and stop again. I have to press the power button, then it boots. I don't know why and any solution for this so my dosent seller accepts if I return to him.
  Does that create major problems in the future if I do not have difficulty?

  Whenever I turn on the pc all the sudden voiceguard #252 device of mini port driver automatically installs and after that it is showing the message that voiceguard mini engine port # 252 was not properly installed. I don't know what is the reason. Can someone help me solve this problem?
  Whenever it is showing the same thing when I turn on my laptop.

  Hi samir,.

  To be honest it is really hard to say something about it because you didn t post important information about your laptop model and the operating system

  Regarding your first problem: it happens when the power adapter is connected or only with the battery?

  On the second problem I m of ideas, but it would be important to know what OS you are using.

• Can not turn on the Realtek8187B satellite L40 wireless modem

  I can't turn on my modem wireless-Realtek 8187 B, I can't see any wireless network. My OS is Windows XP Home edition.
  Yesterday, I installed Win7, but the same problem stays.

  This means that my modem is broken?

  To activate the WLAN you must follow:
  -Switch WLAN on the position WE
  -Use the FN + F8 key combination to turn it on.

  Can you see the flash cards when you press the fn (default on the top of the screen)?

• Can not turn off my Satellite L670-1DN

  Can not cut at all. Works well but on permanently. Any help would be appreciated.

  Can you please send more details?
  Are you using the original OS that you got with it?
  Since when you have this problem?

  What happen when you try to turn off on a regular basis using the Start button?

• Can not play games on Satellite A60

  I the A60 (Mobile Radeon 7000 IGP) and cannot play games on it. Particularly annoying is that I freeze in second life with a gray screen. I have contacted ATI who told me to look here but I have the updated driver from this site. Someone at - it ideas?

  Hello

  First of all, I think that you can not expect that you will be able to play the latest games because of limitation technique graphics card. Only thing that you can do right now is to install the driver designed by the manufacturer of the graphics card or downloaded from some independent sources.

  It will require your graphics card to run faster, but I hope you won't have overheating problems.

• can not turn on the windows, using Security Center?

  recently, I was infected by the virus of fake anti-spyware program called desktop defender 2010. I think I have all that, but is windows Security Center is still saying it is offline and when I try to turn it on, it tells me that it cannot be started. Anyone know what the problem is or how to fix it? Thanks in advance!

  The computer is not completely cleaned up damaged Windows. Make sure that the machine is really clean:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer really is malware-free, then make sure that the Security Center service is running.
  Start > Search > type: services
  When Services appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK for UAC and Services open up high. Scroll down to the Windows Security Center and it is is not running double-click to launch it.

  If this does not work, you can try to repair the system files with the System File Checker. Start a command prompt in the same way that you did Services exception type: cmd
  At the command prompt, type: sfc/scannow [Enter] MS - MVP - Elephant Boy computers - Don ' t Panic!

• Can not turn off the password request after inactivity

  Whenever I get out my phone, it displays a login window when I get back.  I went to the power options, checked "Don't require a password on wakeup" and rebooted, but it keeps asking for the password.  Where else this function is controlled?

  Tried your suggestion - created the new account of a user with administrator privileges & disconnected.  When I did, he triggered a BSOD & restarted.  When I logged on as the new user, the problem does not occur.

  Now, the question is to know how repair my existing profile - I wouldn't do it again.  Is there somewhere in the registry where this function?

  http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
  See if you can follow the above article.
  First part is the creation of an account of neww you have already done so.
  The 2nd part is to copy files to the new account.
  Remember that you must have 3 accounts to carry out instructions. For example, create a 3rd account if you do not. Just to get this done with copy.
  PS You should always have 2 admin accounts. The 2nd admin account acts as your account of emergency backup if the 1st admin is corrupted and you can not connect it. In this way, you will never get locked out of the machine.

  t-4-2

• I can not turn on the camera with windows 8 installed?

  When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.

  When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.

  Put its stupid but yes here it goes. Click Fn + f6 to access the settings - > click on settings in the camera-> in where you will be able to unlock your camera. Once you do this, you should be able to use your webcam

• Satellite P300 - I can not turn off the microphone

  Hello. There is my problem:
  I can't disable the built-in microphone. When I connect another microphone in a mic - record goes on the two microphones.
  If the webcam is disabled in Device Manager - microphone works nevertheless.
  Change of sound intensity of a microphone in a mixer system - two microphones volume varies.

  Satellite P300 PSPC4E
  Windows XP

  Hi Thomas, this is already known, question - buggy / incomplete drivers for the conexant card, it is possible to cut the mic, but this feature has been disabled by the manufacturer! already half a year toshiba does not not for requests for the user on the Conexant drivers for Windows Vista cause! We need as much as possible, even application of various users push them to realize that this is a serious issue and build an update to solve this problem! Other manufacturers have already solved that for their products. Fans are also experimenting with the conexant drivers welcome!

  all similar problems with this sound card I have described in details here:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128858#128858
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128859#128859
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=128878#128878
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37343&TSTART=15

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.

• Sometimes can not turn on my Satellite A200

  Hi all!
  I would like to ask you a question about the power button...
  At the moment you press the power on button all the lights in the front (logo Satellite, power supply, HARD drive) are turned on or is there a time limit?

  I m application because I thing there is a power problem... Sometimes I can´t be able to on the laptop...

  Thanks in advance!

  Hello

  When I press the power button on my Satellite A200 power driving second left) is activated immediately. Second later the HARD disk activity is represented with flashing that LED HDD. Two or three seconds later by SATELLITE led is also enabled.

  If you write sometimes, it is not easy to give a precise answer. Try to be a little more specific.