Can not turn on WiFi on my Satellite C660-2RP


I can't seem to activate / disable the wireless network.
FN + F8 key does not work, but other combinations FN + Fx works well.

Flash cards for UTILITIES-TOSHIBA-START restart does not work and flash cards are not displayed.
The drivers are up to date.

In: control panel-device driver network card
my card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC-> enabled.

My PC: Toshiba Satellite C660-2RP (PSC0QE)

15 days ago ca officials!

I restore at a later date, but nothing comes back.

Could you help me find the button enabling / DISABLING WIFI because I do not see a solution
Thank you.

Message was edited: assignment has been translated


I don't know if this will help but try to reinstall that Toshiba value added package (PVAT). Remove the preinstalled and after restarting the laptop version installed last versin that you find on the download page of Toshiba -

Tags: Toshiba

Similar Questions

  • EliteBook 2530p. Can not turn on WiFi Windows 10

    EliteBook 2530p, Windows 10 home

    Ive just upgraded the machine above 10 win 10 with the help of this site. Everything works fine except one thing, I can not turn on WiFi.

    The orange LED on the touch screen under the screen and the front edge of the machine are both orange and when I try to use the touch screen to turn it on nothing happens.

    All other keys work fine so I don't think that's the problem. I don't know another way to activate the WiFi on this machine.

    The WiFi card is recognized in Windows 10 Device Manager and I have re-installed the card and made sure the antenna cables are properly connected.

    Anyone had similar problems with WiFi / Win 10 works is not on this machine model?

    Any help or advice appreciated.


    I'm frustrated, trying to get the WiFi works because it is a machine I was in the process of selling and I had no user file to worry about, I decided to clean install Windows 10 and re - install Windows 7.

    I did this and load all nessasary drivers but no matter what I did the WiFi refused to turn on. I did several searches and HP Wireless Assistant who got the status of 'Wireless LAN' was OFF but the Start button is grayed out so I couldn't activate it.

    While remaining in the wireless Assistant I hit the WiFi button on the touch screen and a message appeared telling me to unplug my Ethernet cable. As soon as it is unplugged the button power on in the Wireless Assistant has become clickable and I was able to turn on the WiFi!

    So it seems that if you connect an Ethernet cable to this model of HP, the WiFi system is disabled and the only way for him help is by unplugging the Ethernet cable.

    I think I'm going to stick with Win 7 because I'm still not sure that the wireless card is supported under Win 10

  • I can not turn on WiFi

    I just bought an iPad 4th generation.  I can't connect to the internet, and when I looked up the Wifi no service came.

    I went to the Apple website and it was recommended that I have unplug the router again.  Now that I lost the WiFi in total, in other words, I can't turn on.

    I just updated the software to IOS 9.02.

    What can I do now?  Can someone help me please?

    Thanks in advance


    view these documents

    Recommended settings for the WiFi routers and access points - Apple supported

    To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

    If your iPad is still questions after these two continue to this

    Reset your device to factory settings - Support Apple iOS

    If the problem persists contact apple, you have the additional help of 90 days with a new purchase.

  • Can not turn on WiFi

    Have HP Pavilion dm - 4 1165dx - normally F12 turns on WiFi, but this isn't work - like its frozen - 3 month old machine and it was working 24 hours previously - ideas?

    So thank you very much for trying to help me - here's what worked in the end - when I got home, hooked to the laptop by a thread, and then went to the site already advanced by a technician:

    Weblink for HP Quick Launch Buttons:


    Installation instructions
    1. download the file by clicking on the button 'Download' or 'Get software' and save the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

    and the problem has been solved-

  • HP Pavilion dv6 Notebook PC: I can not turn on Wifi after upgrade to windows 10. Having to uninstall my VPN system

    No wifi after windows 10. Uninstall my VPN afterwords, but still a problem of sam.

    The keyboard button vill not turn blue. Tryied the Microsoft solution

    Hey @Lajen,

    You will need to return the system to Windows 7 using your diskettes. All this work and then upgrade to Windows 10 has.

    Thank you.

  • I can not turn off the microphone on Satellite p100-194

    No matter what I do, I can't turn off the microphone of shit, he's always watching on my speakers, I have all the right settings in the sound control panel... believe me!

    Does anyone know how to disable the security...

    * monitor on my speakers even when I uninstalled all the sounddrivers! ... * it seems to be a bios problem... HEEEEELP!

    is there perhaps a bios fix?... or no solution at all on this model, I use win 7 32 bit...

    Hi leon-k,.

    Usually, you can cut the speakers in the Windows sound settings. Go to control panel > hardware and sound > sound.

    Now, choose the recording tab as Akuma written and click Properties > listen. On this tab, you can change the volume and disable the microphone set.

    Check this box!

  • How can I turn on the WLAN on Satellite C660-107?


    How can I activate the wifi in my C660D? I can't find a driver for it. It of not Wifi cointant, is it possible?

    Thanks for the help!


    Sorry, but I must ask you this: have you checked s user manuals document you have with your laptop?
    I mean, there, you can pick up all the info on your new laptop including overview on hardware, pre-installed software and functionality.

  • Can I turn off webcam on my Satellite C660 - 1 7?

    I have a Toshiba Satellite C660 - 1 7 and I would like to disable or turn off my Webcam.

    Is this possible please?



    To be honest I don't understand your question. Webcam is on if use you it with an application like Skype or pre-installed Webcam application. When the cam is on the little blue light near the cam is activated.

    When the application is closed cam will be off.

    Please be so kind and explain your problem in more detail.

  • HP EliteBook 8560p: can not turn on WiFi: the button is orange, and nothing happens when you press


    I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.

    The laptop is a little new: I use only 2 months.

    1. number and product name

    HP EliteBook 8560p
    НР LQ589AW

    2 operating system installed (if applicable)

    Windows 7 Professional 64 bit

    3. error message (if any)

    No error message

    4. all changes made to your system until the problem occurred

    My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.

    Additional details:

    In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.

    I already tried things:

    1. Reinstalled all the HP drivers from original CD.
    2. Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
    3. Checked the mobility Center as suggested in one of the threads available on this forum;
    4. Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).

    Thanks for any help!


    I managed to solve the problem...

    Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.

    I hope this helps.

  • Can not turn on WLAN on my Satellite A60

    I have a portable satellite a60. I coludnt turn on wireless LAN. something seems to you in there. How can I do?


    I'm sure that your device has a wireless card buy please check on the underside of your laptop, if there is WiFi label. If so, the unit has onboard wireless card permanently. Switch wireless, you can find on the right side of your laptop. Set it on it and configure your WLAN.

    Good bye

  • Can not turn on WiFi if it isn't already during computer startup laptop HP Pavilion G6

    1. number and product name
    HP Pavilian G6-1336SA

    2 operating system installed (if applicable)
    Windows 7 64 bit

    Usually, my Wifi works fine and the blue light comes on during startup and I can switch it switch using the F12 key.

    However, if my system starts the color is orange when WiFi is off, he's not the F12 key and activate the WiFi does not appear in the configuration options of Windows mobility.

    This is a problem that keeps coming back from time to time and is quite frustrating because I often have to reboot the system to operate.

    Any help would be greatly appreciated. Thank you

    Ensure that the BIOS is up to date here and the WiFi pilot is the most recent. He could have used a different wifi card installed during the manufacturing process, you may need to try each by using the most recent driver version. It could be a default WiFi card. If the option to turn on all together it is missing, which usually indicates a faulty WiFi card. Youl could also try reinstalling the wireless card listed on page 52 of this guide.

  • can not turn on wifi on ubuntu 11.04

    recently, I installed ubuntu 11.04 on my l645 laptop and I could not find out how to turn the wireless on this subject. but wireless is working properly, when I start the system using the live CD?

    can someone help me solve this problem?

    Hi viraj_1,

    Maybe the driver WLAN card isn t installed correctly?

    The problem is that most of the users here using the preinstalled version of Windows and Toshiba doesn't support Linux. I recommend you ask some Linux experts.

    In addition, check out this interesting article:
    [You know a useful site for Linux on PC support? |]

  • Satellite L500 - can not turn on the new wireless network card

    I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
    But I can not turn on wifi with FN + f8 key - Windows.

    This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
    Can anyone provide another solution than to change the map?

    I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
    I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

    Post edited by: Ipcur

    Hi Ipcur,

    Why you traded with another wireless network card model?

    He works with the wireless network card preinstalled Toshiba?

  • Satellite L650-11R: I can not disable the WiFi using Fn + F8 module


    I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.

    It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.

    When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
    Wireless network card is listed in the Device Manager, it works.

    Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.

    Does anyone have a problem like this?
    Can someone help me?

    Thanks in advance.

    Hmm generally the FN + F8 should switch on / off the Wlan correctly.
    Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
    Try it

    Welcome & good luck

  • Satellite L30-101 - it can not turn on


    I had a Toshiba L30-101 given to me for my birthday in 2006, he initially had Windows Vista on it so because of problems with this program.
    I was later forced to get rid of this program and to install Windows XP, and I have not had a problem since.

    However, last night, I forgot to bring my laptop, normally I do not panic as it happens in sleep mode, and yet when I lift the cover (when I do this windows XP starts and allows me to reconnect my phone) I have met with a black screen, nothing has been loading, nothing has changed, I was faced with a black screen.
    I pressed the standby key and nothing happened, nothing happened even when I hold the button for a bit longer.

    I disconnected the battery, and although 2 green lights showed that I should be connected on the right, I was always with a black screen. I left him a little and he's always like now, only 2 green lights went and it seems that there is no life be it current. I can not turn on,
    I tried to reboot and nothing has changed.

    I don't know what to do as this has never happened before. I might add that, even if I changed the program for XP I didn't no problems with it for 2 years and a half, until now.

    Could someone help me at all?


    Have you tried to remove the battery and the AC adapter? Remove the two, wait an hour and try again.

    If it doesn t work I think that there is something wrong with the motherboard. Maybe it needs to be replaced or another part.
    Therefore, you can contact the nearest ASP and ask for help.

    Good luck!

    Welcome them

Maybe you are looking for

  • Is it possible to save e-mail messages in a folder on the hard drive of my computer

    When I click on Select All to my saved messages, to move them to a folder in my documents, I can't move them all. I can move individually, but that's slow going, as there are hundreds to move. Is there a faster way? Is there a quicker way to move, pe

  • IMAP Trash do not sync

    If I delete something in my Inbox in Thunderbird moves it to the deleted items folder. However, this folder synchronizes with my IMAP server so the email still appears in the Inbox on other devices and does not appear in the Recycle Bin. I searched f

  • Mark this shortened Page keyboard no longer works

    For some reason, mark it this Page (control-D on Mac) no longer works. I hit him, and nothing happens. I know that the command-D in the Finder window works, because it is a duplicate of the file on that I hit command-D. But it is no more bookmarking

  • Setting up the Environment Variables for the unit

    Hello I'm trying the license of the unit on an internet connection that requires a proxy. The unit for some reason any he manages really evil and tries to communicate without using the proxy server. I've been looking around and can't seem to find a c

  • My computer is stuck in ' configuration updated: step 1 of 3-0% complete.» Do not turn off your computer.

    My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing.