Can not turn save the password

Similar Questions

• Can not turn off the password request after inactivity

  Whenever I get out my phone, it displays a login window when I get back.  I went to the power options, checked "Don't require a password on wakeup" and rebooted, but it keeps asking for the password.  Where else this function is controlled?

  Tried your suggestion - created the new account of a user with administrator privileges & disconnected.  When I did, he triggered a BSOD & restarted.  When I logged on as the new user, the problem does not occur.

  Now, the question is to know how repair my existing profile - I wouldn't do it again.  Is there somewhere in the registry where this function?

  http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
  See if you can follow the above article.
  First part is the creation of an account of neww you have already done so.
  The 2nd part is to copy files to the new account.
  Remember that you must have 3 accounts to carry out instructions. For example, create a 3rd account if you do not. Just to get this done with copy.
  PS You should always have 2 admin accounts. The 2nd admin account acts as your account of emergency backup if the 1st admin is corrupted and you can not connect it. In this way, you will never get locked out of the machine.

  t-4-2

• Satellite L500 - can not turn on the new wireless network card

  I have little problem with client model T. Satellite l500-1ek. I change orginal at BCM94321MC wifi wifi card mini pci card (rev 6). Card works well - everything is ok - driver installed ok.
  But I can not turn on wifi with FN + f8 key - Windows.

  This isn't a software issue - this button should work before starting any kind of system, but do not work. I tried everything, including the update of the BIOS. Card works correctly, but can not turn on wifi: (.)
  Can anyone provide another solution than to change the map?

  PS.
  I have reinstaled value-added package and Flash utility support card - fn Panel works but buton f8 disappeared.
  PSP.
  I tested with another card from mnipcie and have same problem - can not turn on wifi - fn + f8 does not work

  Post edited by: Ipcur

  Hi Ipcur,

  Why you traded with another wireless network card model?

  He works with the wireless network card preinstalled Toshiba?

• Satellite Pro A300D-152 - can not turn on the S-VHS output

  After I installed Windows 7 (32 bit), I can't turn on the S-VHS output (TV).

  Any solution?

  Hi Longhorn_1,

  First of all, you should check if the display driver is installed correctly. This means that in Device Manager it should t be any yellow exclamation point.
  New drivers, you can download from the official page of Toshiba.

  In addition, you use output S-video if you press the FN + F5 key combination.
  Generally you must connect the S-video cable first, before turning on TV/laptop. After that turn on your TV and select the S-video port and then turn on the laptop. FN + F5 key combination to switch between monitors.

• I can not turn off the microphone on Satellite p100-194

  No matter what I do, I can't turn off the microphone of shit, he's always watching on my speakers, I have all the right settings in the sound control panel... believe me!

  Does anyone know how to disable the security...

  * monitor on my speakers even when I uninstalled all the sounddrivers! ... * it seems to be a bios problem... HEEEEELP!

  is there perhaps a bios fix?... or no solution at all on this model, I use win 7 32 bit...

  Hi leon-k,.

  Usually, you can cut the speakers in the Windows sound settings. Go to control panel > hardware and sound > sound.

  Now, choose the recording tab as Akuma written and click Properties > listen. On this tab, you can change the volume and disable the microphone set.

  Check this box!

• can not turn on the windows, using Security Center?

  recently, I was infected by the virus of fake anti-spyware program called desktop defender 2010. I think I have all that, but is windows Security Center is still saying it is offline and when I try to turn it on, it tells me that it cannot be started. Anyone know what the problem is or how to fix it? Thanks in advance!

  The computer is not completely cleaned up damaged Windows. Make sure that the machine is really clean:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer really is malware-free, then make sure that the Security Center service is running.
  Start > Search > type: services
  When Services appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK for UAC and Services open up high. Scroll down to the Windows Security Center and it is is not running double-click to launch it.

  If this does not work, you can try to repair the system files with the System File Checker. Start a command prompt in the same way that you did Services exception type: cmd
  At the command prompt, type: sfc/scannow [Enter] MS - MVP - Elephant Boy computers - Don ' t Panic!

• Can not turn on the same monitor if connected to the TV displays error no video signal".

  Original title: barely tv cell

  have on my computer and the screen does not light. He lit up a bit but not on. I have connected my laptop to my tv via the vga cable. Start the computer screen turns off after startup. Start in safe mode, it works. Restart n normal mode turns off screen. TV said no video signal. What causes this?

  Hello

  Try the steps mentioned below and check if they help to resolve the issue.

  Method 1:

  Use the option ' enable video low resolution (640 × 480) ' start and then update your video card driver

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  (d) log in your computer with a user account with administrator rights.

  (e) If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

  If these steps resolve the issue, you are finished. If this is not the case, go to the next set of steps.

  Method 2:

  Start the computer in safe mode and disable your video card

  (a) click the Start button, click the arrow next to Shut Down and then click on restart.

  (b) do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  (c) on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.

  (d) log in your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  (e) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the list of categories of equipment, expand the category of display cards. Take note of your graphics card.

  (g) with the right button of your graphics card and then click on disable. Confirmation prompt, click Yes.

  (h) close all open windows and restart your computer normally.

  (i) when your computer restarts, if you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see update a hardware driver that is not working properly.

• Can not turn on the Satellite M30

  Hello everyone...

  I have a Satellite M30 laptop for time enough and I'm having a problem with it. When I try to turn it on, it makes a kind of scratch noise and then nothing happens. The hard drive lit wrath but the computer does no sound and no picture on the screen. I tried to turn it on with and without the battery and the same thing happens.

  A few days before this happened that I could see the windows startup screen, after that the computer crashed, even when I went to the BIOS Setup screen, the computer also crashed, so the problem was not on the hard disk. A few days later, when I tried to turn it back on, it makes a single probe and nothing else happened. Can it be a motherboard problem? can I try before sending it for repair

  I'm scared of m it s a serious problem.
  Depending on the symptoms that you described the laptop cannot get the message and so I think there may be an error on the motherboard.
  I don t think you will be able to locate the fault. It is simply not possible for the common user like you and me

  If you have no choice as to the request of the service provider for Toshiba for help.

• Satellite L - he can not turn on the installation of the driver

  Hello

  I bought new laptop having problems:

  Sometimes when I turn on it just flash light and stop again. I have to press the power button, then it boots. I don't know why and any solution for this so my dosent seller accepts if I return to him.
  Does that create major problems in the future if I do not have difficulty?

  Whenever I turn on the pc all the sudden voiceguard #252 device of mini port driver automatically installs and after that it is showing the message that voiceguard mini engine port # 252 was not properly installed. I don't know what is the reason. Can someone help me solve this problem?
  Whenever it is showing the same thing when I turn on my laptop.

  Hi samir,.

  To be honest it is really hard to say something about it because you didn t post important information about your laptop model and the operating system

  Regarding your first problem: it happens when the power adapter is connected or only with the battery?

  On the second problem I m of ideas, but it would be important to know what OS you are using.

• BlackBerry smartphones can not connect, reset the password for the update!

  forgotten my password.  When I go to the login page, I get my e-mail address, click on 'forgot password' and it comes up with a new page where I get my new email address, and there is a picture of 6 letters/numbers that I'm typing in order to reset my password.  I type in exactly as stated, click on 'submit' and it comes up saying "image does not correspond to" or something like that.    I entered it exactly as shown.  No matter how many times I do it, he only says 'no match' - so, I can not connect, or if I can reset my password.  To make things worse, there is no method communicating with blackberry, or anyone who is competent in order to obtain assistance.

  Seems I am dead in the water and locked forever.  It seems that many others have the same problem with no path for resolubion.

  gandcsundvik wrote:

  To make things worse, there is no method communicating with blackberry, or anyone who is competent in order to obtain assistance.

  You must call Sprint, they are your software first line and the device's hard support channel. If they cannot solve the problem, you must ask them escalate the problem to a support technique level RIM. They will, and if they do not offer to do so, you must request this firmly.

• Can not turn on the Realtek8187B satellite L40 wireless modem

  I can't turn on my modem wireless-Realtek 8187 B, I can't see any wireless network. My OS is Windows XP Home edition.
  Yesterday, I installed Win7, but the same problem stays.

  This means that my modem is broken?

  To activate the WLAN you must follow:
  -Switch WLAN on the position WE
  -Use the FN + F8 key combination to turn it on.

  Can you see the flash cards when you press the fn (default on the top of the screen)?

• I can not turn on the camera with windows 8 installed?

  When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.

  When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.

  Put its stupid but yes here it goes. Click Fn + f6 to access the settings - > click on settings in the camera-> in where you will be able to unlock your camera. Once you do this, you should be able to use your webcam

• Can not turn on the firewall...

  Whenever I try to turn on my firewall, I gives me an error for letting me know that Windows could not process the request. I was wondering if anyone else has had this problem, and I think it's probably a virus.

  Your laptop has an overheating problem (something that you did not clear before that).

  So that should be your main concern.

  As soon as possible (if you haven't already), copy all your personal documents and files on an offline support (USB, flash or CD/DVD drive external HARD disk drive).

  The laptop is apparently reached the end of its useful life.

  You can get a quote on repair of the material and compare the cost of a new pc. You want to check a good local reputation to small not big-Box-store shop on quote.

  Before you know it, our assumption was that she had a malware infection and who had been my main goal. The assumption is still legitimate because you reported punches a.

  You can consider a notebook cooler (of an electronics store) to mitigate the heat problem, but that will probably be only slightly lower. The laptop hard drive may be causing the overheating.

• Can not turn on the editing tools in this forum in Safari 9

  I created this post in Safari on Snow Leopard 10.6.8 5.1. As you can see in the first picture, there is an edit above the text area box. However...

  When I try to create a post in Safari 9.1.1. in the Yosemite 10.10.5, I don't see what I'm typing unless I highlight (see second photo attached). Of course, the color of the text was missing to white - and without editing tools, I can't do anything on this subject.

  I could use the code to change the color of the HTML text, but this isn't a real solution; everyone knows how to do this, and I barely do. Any suggestions on how to activate the 'full' editor in Safari 9.1.1?

  Note: This problem does not happen with text boxes on other sites - this alone (Apple Support). However, I can't be sure that the problem is specific to this Web site, or if my browser ignores a style sheet blocking something, etc. I just need suggestions to diagnose the problem, so I can use my MacBook to publish on this site.

  Attached photos:

  Area of text in Safari 5.1 under Snow Leopard support forum

  

  Support the forum text box in Safari 9.1.1 on Yosemite

  

  Post edited by: Mr. Mellow, to move it to the appropriate category of support

  My browser is Firefox, I started Safari 9.1.1 and here is a screenshot of the response box to your post showing a clickable link to the Advanced Editor:

  

  So I can't reproduce your problem.

• Can not turn on the monitor on the Satellite once the display turns off after 10 min

  Hello..

  I have a problem with my laptop...

  When the screen turns off after 10 minutes, it no longer lights!

  I move the mouse, try typing on the keyboard, but it does not work...

  to activate the display again once I should close the lid for the hibernation, then open it again!

  I hope that you will help me @_ @!

  Hello

  Check it please http://support.microsoft.com/kb/917332/en-us
  To correct the behavior please download and apply the patch (KB917332) which could be found in the resolution detailed below. I hope this will help.