can not use the card slots to post my camera photos gallery of windows crashes

No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?


No, I have not found solution. on my pc-card slots will not work cause the pictures of my camera fall during validation on windows Gallery?

Just a guess... but if the photos are originally Photo
Gallery crashing... you can shot in RAW format
format. For example... Nikon RAW files have a. NAVE
extension and Canon RAW files have a. CR2
extension. If this is the case, install the
After the codec pack could solve the problem if
your camera is included:

Expand the 'Détails' section to see supported devices.

Microsoft Camera Codec Pack
(Windows 7, Windows Vista Service Pack 2)
This package will allow RAW supported
camera files visible in Windows Explorer


Maybe you can copy your pictures to a folder on
your hard drive as follows:

Insert the memory card into the correct location on the media
Drive... If open windows... Close them.

When the card is inserted... If you go to... Reach... Start /.
Computers / devices with removable storage... is the
player card on one or several removable disks?

Removable (e :)) drive
Removable disk (e :))
Removable drive (g)

If_Yes_you can download photos from there. Left
by clicking on the drive letter that corresponds to the memory
card slot should display the directory of the card and you
can copy and paste or drag and drop the photos of your choice
in a folder on your hard drive.

Just a select group of photos do a right-click and choose...
Copy... then navigate to the folder you want in and
Right-click on the folder and choose Paste.

Tags: Windows

Similar Questions

  • Can not use the card PXI controlling SCXI for something else

    Hi all

    We have a hybrid chassis of 1052 with a PXI-6221 (control of the special SCXI version) into the slot of the 8th and, while it allows us to access map of the SCXI-1540 module without problem, if I try to add the NI PXI-6221 to the list of data acquisition cards to read the definition of system files or I make reference to any channel in a task of analog input (custom device) it is telling me that the resource is reserved. When I list the card in the system definition file, it gives the error message even if I turn off the single-point support timed by the hardware.

    I went back to the documentation for the Web site and I couldn't find a place where it says you need a card PXI for controlling SCXI cards but that the PXI card controls became useless.

    I'm doing something wrong?

    Thank you.

    Dear Claudio_G,

    That should really be a limitation in VS2011 because there are future news added since VS2011.

    And the reason why it works in the custom device could be the one custom unit as PXI6221 and SCXI1540 are separated internally in which the task and VS that it works in the same task.

    Then when it works properly in the custom device I recommend to use this way or other wise update to VS2013.

    Kind regards

    Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |

  • I'm unable to connect to the internet and I also can not use the WinXP system restore.

    No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

    The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

    Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "") and enter the command:
    and after the info that appears in the State resulting.

    Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.


  • I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

    I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

    There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

    The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

    1 back up all data.

    2. disconnect all external storage devices.

    3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

    4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

    5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

    6. triple - click anywhere in the line below to select this option:

    chflags -R norestricted /V*/*/S*/*/Caches

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    7. Quit Safari. You go back to the OS X Utilities screen.

    In the menu bar, select

    Utilities ▹ Terminal

    Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

    Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

    8. Select

    ▹ Restart 

    in the menu bar.

    9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

    Select and copy this line as in step 6:

    sudo /usr/libexec/xpchelper --rebuild-cache

    Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

    If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

    Wait for a new line ending with a dollar sign ($) below what you entered.

    10. make as in step 9 with this line:

    sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

    You can then quit Terminal.

  • Satellite A100 (PSAARA) - I can not use the remote control

    I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

    Thank you!

    If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
    If this does not help please let us know.

  • Cannot find the product key and can not use the gift cards to buy Windows 7 from retail store

    Original title: Let Down by Microsoft Retail store

    My daughter lives and breathes on his pc. We had some tough times lately, and of course, his computer has had too many problems. In February of this year, I bought a Win 7 Home Premium for his pc. Since we moved, so I can't find the package with the product key, or the disc. I have $75 in gift cards from Microsoft, I need to buy new win 7 hp. Almost all retailers (in store and online) competitive price a new copy for about $119. We have been saving, and with gift cards, I would have just enough money to buy win 7 hp for my daughter. I went to our Microsoft store in the Mall. (Don't forget I saved for about 6 weeks, we are on a budget, then gift cards have been a miracle!) Guess what? The only place that I can use the maps from Microsoft wants $199.99. To add insult to injury - I can't use gift cards for purchases in line-HELP! We waited 2 months just to be left out... I am very disappointed by Microsoft.
    I thought that we recorded our product with Microsoft when it was originally installed, but cannot find anyone. All solutions?

    If you have purchased windows is installed a keyfinder allows you to recover your product key.

    I think that the price of $119 is to upgrade xp/vista to windows 7.
    the $199 price is for the full version.
  • T2i can not format the card

    I used this card several times. I copied the files on my computer properly. When I put the card in the camera to format and turn on the camera, it says "No card in the camera" all my other cards work fine. I can still read the map with my card reader.

    How can I fix this card? Because the camera does not recognize that there is a car in the slot, I can't reformat the card in the camera.

    Have you tried to format it on your computer & card reader? If this does not work, I would recommend replacement before you have important pictures on it & can't get back them. The cards are not that expensive these days.

  • Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

    I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

    In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

    The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

    Any ideas?


    You can download the drivers (and especially in your case for the sd-card-reader) here:

    and here

    So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

    If you have any other questions, just ask. ;)

    Good bye

  • Why can't I click on some parts of my screen only if you are using firefox. I can not use the upper part of my scroll bar, but can use the background. I cannot click on the top of all sites, but he can click on any part of the site.

    If you use firefox, I can't use my up arrow of the page or click on the upper part of the scroll bar to make it move. Can I use the middle and the bottom of the bar. Also, I can't click on some items that are on a certain part of a web page (upper part). When I use firefox to open my email the same thing. I can't click on the upper part of the page e-mail delete tab, check e-mail tab, etc. However, I can click on it when I use internet explore so I don't know if it of a firefox issue or not. Thank you

    Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

  • I can't use the card wifi on my laptop. It shows that the signal is strong, but I'm unable to visit Web sites in Internet Explorer.

    original title: error WiFi

    I can't use my WiFi on my laptop.  It shows that the connection is made and the signal is strong, but can not use Internet Explorer.  WiFi switch is on.  I tried the Windows button more X and that did not help.  I get an error message: the NIC "Realtek TRL8187B Wireless 802. ' 11 b / g 54 Mbps USB 2.0 Network Adapter "experiencing driver or hardware related issues.


    Get the latest drivers from the support site for the computer and try to install after you remove the old drivers.

  • I use iphone 5 s updated to 9.2, but I can not use the network and call :( Please help me

    I use iphone 5 s updated to 9.2, but I can't use the network and call someone help me please

    What happens when you try to use the network?

  • Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition


    This is my setup
    Computer: Satellite Pro 4600 model ps460e 02hyt en
    Operating system: Windows XP SP3
    Mini pci wireless lan card: pa3070u - 1mpc mpci3a-20

    My problem:
    The operating system has been improved in win 98se to windows XP SP3.
    The mini pci wireless lan card does not work I try to download the right drivers but I have a big problem all driver downloads does not work. I don't know the physical name of the Council.
    Where can I find a solution for the update of these drivers? Is it possible that the mini pci wireless lan card does not work with windows XP SP3?

    Please I wait your help

    Thank you

    [email protected]

    I imagine that it will be compatible with SP2 well. You can test it please and post the result?

  • Satellite A100-062 psaane: can not get the card reader to work

    Hiya... Please can someone help?

    I try to use my card reader with a Pro duo stick.
    I put it in the Pro duo adapter and when I put the card in the slot of the card reader that nothing happens...

    Thank you in advance if you can help.

    cordially imalive

    I use the memory stick duo adapter and when I on it on the inside of my Satellite in Windows Explorer is happening again drive (F) and symbol that shows Memory Stick.

    Try to please several times to put inside. I remember that in my case it worked after the third time I put it in the slot.

  • Can not use the USB ports on my Satellite P10

    I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

    Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
    Any suggestions? I want to add an external mouse drive DVD etc...

    Any help appreciated... Mark


    Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
    I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

    The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

    In Device Manager, you may turn off the power save the unique option to the USB ports.
    You can do this in the properties of the USB port

    Additional I advise to use a USB hub with external power clean.
    These devices are not very expensive and will allow you to connect and use several devices together.

  • Can not use the Gmail account more

    Since that day (May 27, 2015) I can't use one of my accounts Gmail w / T.Bird more. On the other (older) I had to put safety at 'low' or something today via the web interface of Gmail. Then he worked kind of new (AddressBook adds now no longer works, but that is another problem).

    When I check my email from Google via a web browser, then I see that there are emails. But I do not see these mails in Tbird. Google did some extensive fiddling with today?

    Thunderbird still works with a gmail account?

    Now for this address book


Maybe you are looking for

  • Compatibility of the OSX installation discs?

    I went in the OSX installation process and realized, I had the second installation disk. The version I have only sold in a bundle and is inexpensive, where some other versions are much cheaper and sell with only 2 disc, which is exactly what I need.

  • Open lines additional drawing on the Smith chart

    If someone could tell me why the plot of smith, projected in the attached VI has drawn additional ones on a beautiful I would be eternally grateful. If you change the line style to be fair "points", you can see that there is no notes right, but once

  • Logic Analyzer

    Not sure how to connect the Logic Analyzer to expand the table of truth. New on EE.

  • How does indexing?

    For some reason, I found that my index is off and I can't turn it back on. I know the index off is supposed to help by running a set of office faster, but I'm concered than a PC Cleaner trial my did this, if this isn't what I wanted. Any help it turn

  • DOES not-location of the ATA CD/DVD device Sony Q58A device 0 (channel 1, Target 0, Lun 0)

    HERE IS THE MESSAGE of ERROR I see IN DEVICE MANAGER-"Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». This problem has been occurring for a week, so I even re