Can not use the wireless network card after the upgrade to Windows XP Home SP3 on Satellite Pro 4600 edition

Similar Questions

• Lenovo g550 can not use wifi or video card after clean install of windows 7 ISO generic

  My hard drive crashed and I have no cd of restoration windows does not see the WIFI card or video now. I updated the drivers to support, but there's work to see them. I tried not to update the version of the bios again. Y at - there a step I'm missing?

  Update: wifi was disabled in the BIOS, so I allowed it and re-installed video driver and it worked as well.

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• My Satellite Pro A300 series number is not found and can not get the upgrade to Windows 7

  When I get my Satellite Pro serial number, it is said that it is not in the database and I can't go any following get Windows 7.

  Can anyone help?

  Hello

  What model of laptop do you have exactly?

  Which from Toshiba Web site did you use to upgrade to Windows 7?

  Are you sure of your laptop is supported and upgraded Windows 7 ready?

• Can I use the key of Windows 7 Home Premium to Windows 7 Home Premium Service Pack 1?

  I have a product key for Home premium windows 7 64 bit I can also use it on Windows 7 Home Premium Service Pack 1

  Original title: Windows 7 HP 64 bit product key

  Yes, you can, as long as the product key is not already in use. The product key doesn't care if its Windows 7 Edition edition or Home Premium Home Premium SP1.

• Can not change the themes for Windows 7 Home Premium.

  I use Windows 7 Home Premium on my Toshiba Satellite laptop. I can't change anything in relation to the themes. Specifically, I want to change the wallpaper. But I just can't. I ran the File Checker system under the prompt as an administrator, but he couldn't find anything wrong. I just want to change the wallpaper. Can anyone help?

  UPDATE. I just fixed the problem. I'm gone in 'Start' and then typed "services.msc" in the search field and press "enter." I scrolled down to "Themes" and saw that it was on 'Manual' and it is supposed to be on "automatic".

  Double-click "Thèmes" and in the drop-down menu, select "automatic". Don't forget to click on 'Apply'. When I did this, I could change my themes. I want just convey you that to someone else. "Dissed" thank you for responding and trying to help out me.

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• Can not use the laptop as Windows 10 use 90% of the hard drive, what can I do in addition to using an external hard drive?

  Dell Inspiron 14-3000 Series

  I have this laptop. My question is why do you want to sell a computer with 32 GB drive hard when you know that the OS will seize 20 GB? How am I supposed to use this computer? I can't upgrade the HD and why I should buy an external drive for a laptop?

  So, I'm totally confused.

  Thank you

  This isn't a real laptop - it is a glorified tablet/internet device.  It is fine as a Windows to replace a chromebook, but forget not run anything challenging about it - it is designed for one purpose: be inexpensive.

• Can not find the drivers of Windows XP Home for Satellite P100-120

  Hi all,

  I have just formatted my laptop and I can't find drivers Xp Satellite P100 - 120 (PSPADE)...
  The http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp url P100 series there are only some PSPA0E, some PSPA3E and some PSPA6E... it isn't my laptop series PSPADE!
  Any suggestions?

  Thank you all.

  Hello

  This P100 laptop came with Vista. Am I wrong?

  It seems that the XP drivers for laptop that were shipped with Vista are not available at this time.
  I would recommend so choose and install drivers XP another series P100.
  Usually many laptops are delivered with the same specifications of equipment and you can expect that other drivers will run on you laptop.

  check just...

• How can I change the language on Windows XP Home SP3 from Japanese to English?

  I tried to change it in the Control Panel, but no there is no language option.  Y at - it another option other than buying a new version of Windows XP?

  Is not possible. You can buy the complete installation in English which, incidentally, must do a clean install... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• Satellite A100 (PSAARA) - I can not use the remote control

  I used Toshiba A100 PSAARA, but now I can not use the remote control to operate all things?

  Thank you!

  If the remote control suddenly stopped working trying to restore the operating system to an earlier time using System Restore tool.
  If this does not help please let us know.

• Can I use the product key to my Home Premium pre installed windows 7 64-bit OS that are in my label of windows laptop back?

  I downloaded the iso file of windows 7 Home premium 64-bit. can I use the product key to my Home Premium pre installed windows 7 64-bit OS that are in my label of windows laptop back...

  Original title: the Windows 7 product key

  Yes you can. To learn more:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  If your computer is pre-installed with Windows 7 Home Premium, you should have a recovery if partition:

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ------------------------

  If the recovery partition is damaged or does not, you can then use the downloaded Home Premium as an alternative.

• Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade

  Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade.

  The only option I have found is to click again on the download button, but the circle of download rest bike for a long time and ultimately that nothing happens.

  See if that helps...

  Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions.