Can PCI 6602:How I use digital lines of the Board of Directors and at the same time to generate trains of pulses by using a meter?
My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx.
I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). What I do in my request, it's that I'm starting to generate the pulse train on the output of 2 meters and after that I play with the State of digital lines.
Traditional, it was no problem to use the meters and digital lines at the same time, everything went perfectly, but in DAQmx, is not possible.
What's happening: I start generating train of pulses on the output of counters, no errors, but when I try to change the State of a line of digital port the generation of the pulse train is stopped. What happens when I start the task associated with the digital way.
My question is: is it possible to create a channel on digital lines without changing the channels created for meters?
Another thing that I managed to do with the panels 'Measurement and Automation Explorer' and Test for PCI-6602, is basically the same thing, I generate trains of pulses on the output of the 7 meter and try to start a job on the digital line, but I get an error:
"Error-200022 occurred in test Panel.
Measurements: Resource requested by this task has already been reserved by another task.
On the contrary if I use the counter 0 or a counter 1 to generate trains of pulses I encounter the same problem.
What resources are used by 2 to 7 of the PCI-6602 card counters and the counters to 0 and 1 do not use?
Thanks in advance for any answer!
After doing some real tests on this device, I found that it is a normal behavior for the jury of 6602. This is because when you start a task digital all 32 lines are configured for digital i/o, so it replaces your meter operation. The article below the link explains a little more on this subject. You must start the digital task before the task of counter to use the features of both in your program.
2 meter and above will not work correctly when you perform digital i/o on NI 6601 or 6602
Tags: NI Hardware
I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?
Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.
Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.
can someone help me to show how read datalog multiple files at the same time?
Here is the example of my case.
I have 500 files in a folder. each file contains a waveform and its setting.
and then I want to do a card spectral these files, because these files have been saved in the order.
the point is to know how to read these 500 files at once? I made a program to read these files, but the program can read these files in one by one. So it is very uncomfortable to read 500 files one by one. can someone help me solve this problem? Thank you. I hope you can show me the program. Thank you again...
Well, in the range of functions daughter, you will find a function to list the contents of the folder. This allows to get the names of all the files datalog, and then use a loop FOR to read.
No one is obliged to provide 500 names of files manually - that's why we use a programming language to let the computer do the stupid work
How many user take RDP at the same time with different user login ID in Server R2 2012?
How many user take RDP at the same time with different user login ID in Server 2008 R2?
How many user take RDP at the same time with different user login ID in Server 2012 starndard?
How many user take RDP at the same time with different user login ID in Server 2008 standard?This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it
How to open two PDFs at the same time (for example on two related screens)? It was always possible in the previous version of the Adobe Reader software. Now while one of them is open, I can't open the other, because it is hidden, and I have only shown in the taskbar as a thumbnail.
You can disable this in the Edit menu-> preferences-> General
iI am trying to share a number of edited files and sending one at a time takes too much time. How to share several files at the same time?
Yes, you can select and send/share several files at once.
Start https://cloud.acrobat.com/send. Click Select files to send and then follow the instructions in file selection. If you want to add more files, simply click on add files:
You can include up to 50 files by "transaction".
How to display multiple images at the same time in CS6?
If you go to window > reorganize you can choose from several display options. Below, I have chosen two horizontal spaces since I have two images, but you can select other options if you have more than one image.
Is the problem that you have plain text of 400 lines, and you are wanting
- Tags around each line automatically? If so, try to stick a
copy all the text in a separate empty file, then go in Edition > search
Just a heads-up - I'm on a Mac, so if you're on a Windows computer, the
keyboard shortcuts may vary a little.
For the search field, enter the character of CR - on my Mac, I have to
Hold down the command (probably the control in Windows) key while hitting
Check back for it leaves the input field. That should put a line break
in the search field.
For the replacement field, enter this:
... and then, place the cursor between 2 tags and it shift-return (or
-have to insert a line break).
If you run find/replace, should replace all line breaks, so
you will need too just add the opening:
.. .and closing...
There may be a better GUI or regex how to do in DW, but how is it
I know what to do (if it is still what you ask).
> Is it possible to do this? Instead of having to select 400 separate lines and
> put around them, list item code is possible to do in each
> single-line at the same time? I really hope that nothing. I'm sitting here to make
> this, thinking, "there must be an easier way." Please, tell me there!
> Thank you!
> - Alyse
How to select multiple cells at the same time? What is the keyboard shortcut?
Thank you to.
Flo, a french guy.
Hold down the CMD key when you select the cells.
How to watch two clips at the same time on the other, with an opacity of 50% each. It is confirmed that the position of the object even two clips of mergers.
PPut a clip on top of another in the timeline panel. In the video Inspector reduce the opacity of the clip on top.
I live in Spain, where I have a few computers to service. The internet lines here are slow and unstable, so it is difficult to get all of the updates in without entering the trail other activities.
I wonder if it is possible to download El Capitan on a single computer and then distribute to others, after which I can update at the same time am.
Would this be possible?
According to the license agreement, the license of the OS is for you only, but you can install on any computer YOU own and control. So if download you it and then reject the Setup program before you start, you can find it in your Applications folder from where you can copy it somewhere safe to use on another computer that you own.
Because the download is linked to your Apple ID, use it on another computer does not work as it should download it using their own Apple ID or they will never be able to reinstall or update that the used ID does not correspond to their.
And, since you said you 'service' of computers, you will need to look at another type of license - you will need to contact Apple. The retail license is nothing for you.
I used the first cs 6 to add some titles be subtitles, but I need to change the font family, how to change their entire family of fonts at the same time? Thank you
You can not. For now, it's both. But it would be nice if the PP had a kind of this feature of type CSS, where you can set fonts, sizes, colors, etc. in one 'preset' and have these parameters to ripple through all titles of the project whenever the preset has been changed. Please tell Adobe you want such a feature.
I am trying to extend this line along the same angle using the tool by selecting the end anchor and opening the dialog box move.
I offer 10 cm from the same angle, looking at a clip, endpoint does not seem to be on the same angle that my initial line, what am I, I did wrong here?
adjustment in preview.
in fact I have get it now...
If I place the anchor in the middle of origin (0,0)
the zero angle is horizontal going right. Here, a shift of 5 cm along the horizontal position.
at 90 degrees, it is a vertical climb of origin (0,0) of the distance 5 cm or - 5 cm vertically according to the 2D space mapping illustrators.
and so on, 180 degrees, moves the point of anchor-5 cm horizontally as 180 is the opposite of the direction of 0 degrees
and finally, rotate another 90 degrees (180 + 90 = 270) + 42 degrees = 312 degrees it will go through the same angle/vector as my original line (No 315 degrees because my original point was not precisely placed on the origin.)
Original point zoom not accurately on the origin...
I'm almost embarrassed to ask this, because it seems so simple. But I am new to LR and need help.
I want to apply a preset (exmample, a preset that resembles the film) to multiple pictures at the same time. (similar to edit in Photoshop batch) but I want to want the balance of whites etc is necessarily the same thing, of course. Help, please!
Make that 99jon wrote, then select all the thumbnails of the images you want to apply a preset. (ctrl + click is sometimes a bit boring to select different in the grid images when browsing a large number of them. consider using the spray can and apply a label of color to the images you want brand. and then filter for color you "pulverized").
After selection there is no need to switch to the module development for appl a saved preset. In the library module go to quickly develop Panel and select the preset from the "Preset" drop saved.
Make sure that the preset affect only the properties you want to change. If the white balance must remain intact, then check the box for the white power off balance when you save a preset.
I used a PXI-6254 adapter connected to the scb-68 and I try the digital output signal 16 on port 0 at the same time, so I chose to use the connector 1 port 0 line 8-23 but I can't outpul all the signal, he works for line 8-15, but for the rest, 16-23 does not work and I do not know the reason.i join 6254 board configuration and vi that I use
I have taken a look at your code and noticed you write only FFFF, who would write only the first 16 lines, 0-15. Did you follow the first 8 lines of activity? If they work, I recommend that you add 8 extra bits, up to 23.
Maybe you are looking for
How to merge small movie files that were recorded with an IPhone with larger files that were recorded using the portable camera? When I merge the parties left and right files wieder in QuickTimePlayer are cut. Conversely, when I expand the IPhone mor
Computer is Windows XP Home Operating System and I would like to format hard drive is connected in a basket through the USB port to the decision-making of the motherboard... The problem is that the computer recognizes that the drive has been connecte
After update of Mozy backup, WordPad opens at startup. Here is what is documented in WordPad: [LocalizedFileNames]MozyHome Status.lnk=@C:\Program Files\Vodafone PC Backup\oem.dll,-20101 He cannot stop open
missing sound recorder, windows 7
my all in one j6480 won't turn on or off by pressing the power button. from pluging in the power cable to the output, the display panel stays on by a flashing point moving from left to right, repeatedly. also, there is a faded beeps coming from the p