Can ping but not connect to the system in real time

Similar Questions

• Can I download a background on the system in real time and run it?

  Hi, I would like to take advantage of some tools in the system in real time.

  I thought that I could download it by file transfer,

  

  and then did something like this in the system in real time.

  

  Probably it is not...

  However, there is other ways to achieve my thought in the system in real time?

  Do you mean the exe was built for windows, so that it is not allowed to run in time real system?

  Fix.

  I have to communicate between CompactRIO and servers through an ethernet cable...

  so... you write a program runs on the cRIO and bring it to your servers over TCP.

• Can Ping but not connect via Remote Desktop - how to change the settings of the outside LAN adapter

  I have a Windows Server 2012 machine connected to a Windows 7 Pro machine via a switch.

  Internet is shared on the Windows Server and the port sharing network has a static ip address. Similarly, the port connected to the Windows 7 Pro has a static ip address. I was able to desktop Windows 7 remotely from the server without any problem until very recently.

  Recently, I had to change some properties of the LAN on the machines and I was changing the gateway by default for the Windows 7 Pro, when I was hunting from my remote desktop session and I was not able to reconnect since. I don't know if I accidentally blew the subnet or the default gateway, but I know for sure that I do not touch the part of the parameters ip address.

  In addition, I can't ping the server computer but I am not able to connect via RDP. Please suggest any possible causes and solutions for this case. Both computers are remote and I can connect via the internet to the server computer.

  As my title suggests, I'm trying to find out if there is a way to reset the settings of the adapter LAN from Windows 7 to my server and proceed from that.

  Please let me know if you need more information.

  Thank you.

  RAM.

  Hi Ram,

  Please contact Microsoft Community.

  Problems with Windows Server 2012 are supported in the TechNet Forums. I suggest you send the request in Windows Server 2012 general Forums TechNet.
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Hope this information helps.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Said computers that windows could not connect to the system event notification service

  Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

  I played the system restore. Solved the problem, but why did it happen?

• Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.

  Original title:

  Try to connect Huawei Sonic to win7x64 pro edition using bluetooth.  Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone.  How do I overcame the problem of connection I want to transfer photos from phone to PC?

  Hello

  1. are you able to communicate and share with other Bluetooth devices?

  2. what happens when you transfer files?

  3. do you get an error message?

  4 you did changes to the computer, before the show?

  Method 1:

  Connect the phone to another computer and check.

  Method 2:

  If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.

  http://support.Huawei.com/support/

• can read but not write in the Numbers worksheet

  Can read but not write in the worksheet Numbers on my MacBook.

  Hi Frederic,.

  This also happens if you are still in the screenshot. Is there a "Done" down button on the right?

  Quinn

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• Install OR Vision on the system in real time

  Hello

  I am trying to install NI Vision RT and NOR-IMAQ RT on my controller PXI-8108. However, I still get an error, there are unresolved dependencies and that some version of NIVISSVC is necessary.

  

  Does anyone know a solution to my problem?

  Is this problem related to the problem described in the knowledge base (Document ID: 46PK6PP6)?

  Some data from my host system:

  -LabVIEW 8.6.1

  -Measurement & Automation Explorer 4.6.1

  -NI Vision 8.6 (treatment of Image and Machine Vision, and Services)

  NOR-IMAQ 4.1

  OR-IMAQ I/O 2.2

  NOR-IMAQdx 3.2

  The PXI controller:

  PXI system (OR PXI-8108)

  PCI-GPIB

  -Chassis 1 (PXI-1042 (q)

  PXI-6733

  OR PXI-8432/4

  PXI-6233

  Thanks in advance for your help

  Bernd

  After installing Vision 9.0 and NOR-IMAQ 4.4 on my host, I had no more problems with the installation on the system in real time.

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Windows could not connect to the System Event Notification service.

  I have a DELL Latitude E6500 32-bit computer Vista Ultimate SP2 with a wireless network in the home network. I got the above error message tonight and I don't know what to do about this. He said that this prevenets limited users to connect to the system. I don't know anything about networks. The Geeksquad installed for me and I'm lost.

  Help, please.

  See if this will help you to start the recent Notification System...

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll down to find the event notification system... > until it clicks >
  topic status, it should be... Has begun
  under Startup Type, it should be... Automatic
  If it is not defined, right-click the event notification system > properties >
  in the start of type position, click on the pointer, and then select Auto
  as a Service status, click Start
  Click OK when finished

  Make the same adjustment of...
  Remote procedure... that represents the remote procedure call (RPC)
  DCOM Server Pro... which represents a DCOM Server process Launcher

• Windows could not connect to the system event notification service service.

  Hello

  For the moment, I have a problem as in the title. Whenever I have Windows startup, a message box appears to tell me that it couldn't connect to the system event notification service service. I also lost my Aero theme too, they was disabled and cannot be enabled. I checked all the services, and they work fine. I tried "'winsock reset", "sfc/scannow" but nothing doesn't change.

  BTW, here is my journal CBS . I use Nod32 Antivirus.

  Sincerely,

  Quan Nguyen T.A.

  The WAT update seems to have been falsified.

  The installed product key is a MSDN one which was broadcast all over the internet.

  https://www.Google.com/search?q=2CGXT-3BQDX-DG8BM

  The installation is a counterfeit.

  You must reformat and reinstall using authentic materials and key.

• monitor thread on the system in real time

  I have a SMU-8101 controller in my PXI system. I have it running with a system of operating in real time. I inherited some software WHICH has been used on a program of LabWindows used on a PC with a Windows 7 operating system. The SOFTWARE seems to work OK. My problem is when I leave the program I get an ERROR of EXECUTION NOT DEADLY

  "

  Source position thread ID unknown 0x000000EC

  Your CVI program ended on the target in real time. However, there still on the target in real time, the threads that are running or have already run the CVI code.

  Please check that your application cleans all its threads. Son left running after that your application can crash the target in real time when your application is unloaded.

  "

  As I said I got the code and there is a lot of it. I am looking for a smart way to track down these threads. I was wondering if there are tools available that could help with this? Or any other suggestions on how to run these lines down?

  Hi DPearce,

  This article knowledge base has some information on why CmtDiscardThreadPool causes your program hang and gives some recommendations for fixing it.

• no internet but not connected to the wireless router

  I have 400 SL with windows vista installed.
  Everything worked well for years, until a few days ago.
  It is the symptom, and what I've done:
  1. the laptop CAN connect to the wireless network, no problem, very strong, just signal has no internet.
  cannot ping google.ca.
  In network and sharing Center:
  Computer---> network---> Internet
  ^                   ^
  |                     |
  Red Cross OK
  2. all other devices (iphone, ipad, other laptops) can connect to the network and internet.
  3 did a system restore on the eve of this stoppped working. always the same.
  4A bought a wireless adapter, always the same. but it works fine on the other laptop
  5 tried to set a static IP, subnet mask, gateway, still the same problem.
  6. any other device can ping each other with the exception of this laptop...
  7. the seller cordless tool is uninstalled (Lenovo connection management tool)
  8 rebooted a million times between all the steps
  9 safe mode with network has the same problem.
  10 tried to use other wireless, still the same problem...
  need help...
  Thank you
  -Virginia

  Hi Virginia,

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the problem, I understand that you can not connect to a wireless network on windows vista computer.

  I appreciate your efforts on this issue, however no need for you to worry we are here to help and guide you in the right direction.

  Help me with the information below.

  -Don't you make changes on the computer before this problem?

  I suggest you to disable temporarily security software and then check if you are able to connect.

  Method 1

  You can also temporarily disable the security software and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  Method 2

  Reset the router and see if that helps.

  Note: to help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.

  You can see this help article.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.