Can place my labview application on a public website .exe

Similar Questions

• How a LabVIEW application can be run from the account invited in Windows 7?

  I want to do some of my labVIEW available visitors to temporary applications (no DAQ or involved external devices) in the laboratory. A natural choice would be the guest account in Windows 7, but if I try to run LabVIEW or one of my LabVIEW applications built, I get the following error message.

  

  I don't know that this can probably be fixed with a few permission settings. What is the best way to enable these applications running from the guest account?

  I think that the easiest thing would be to create another user account and set the permissions on that if guests are unable to get into the stuff you don't want them getting into.

  http://digital.NI.com/public.nsf/allkb/88F3CCEBB08AFA6D86257A00006F21D5

• LabVIEW application developed on windows can be installed under linux?

  Hi all

  I use suite developer LabVIEW 2009 on windows 7 PC. I was wondering if the application created with labview on PC can be deployed on the linux platform? If not, is it possible to develop the LabVIEW application on windows to deploy on linux platform?

  I was also wondering if computers single-board as Beagleboard, Raspberry Pi are loaded with linux, labview application can be deployed on these computers?

  (in simpler words, I wonder, with existing suite of Labview 2009 developer on windows, can I develop a data acquisition application and deploy it on single-board computers that have linux installed on them.)

  Thank you!

  Nilesh-

  To create an exe on a Linux platform, you need LabVIEW for Linux with its application builder. You can open the source on the Linux machine.

• Page can not be displayed (11i applications) using the public IP address

  Hello
  
  I can't display the login page in our applications 11i using public IP.
  But on the local network, the connection is fine.
  
  This is the Apache logs and newspapers Jserv to my public IP error.
  
  http://rapidshare.com/files/371133255/Apache_logs.rar.html
  
  I hope you can help me how to trace debug my mistake.
  
  
  Thank you very much

  Hello

  where can I find the access_log?

  Apache logs can be found at:

  $IAS_ORACLE_HOME/Apache/logs/Apache
  $IAS_ORACLE_HOME / / Apache Jserv/logs
  $IAS_ORACLE_HOME/Apache/Jserv/newspapers/jvm

  Kind regards
  Hussein

• Can I convert a Lookout app in a labview application?

  We are thinkig here seriously for migrating to Labview. There is a complex application with Lookout 6.0 we want to convert a labview application. Having good Labview, is there a way to compile, open and save or convert enforcement Lookout in Laview application?

  Excuse my ignorance on the matter.

  Best regrads.

  Rudy

  Hi rudy,.

  The research forums very oftn gives an answer: http://forums.ni.com/ni/board/message?board.id=190&message.id=5193&requireLogin=False

• . Misfortunes of ICO in the Windows registry for my LabVIEW Application

  Wow, adding that last bit of spit-and-shine in a LabVIEW program can turn into any process.

  I defined a type of file with a .tpml (XML file of the temperature profile).  When my user double clicks on a file of this type, it launches my LabVIEW application.  All this is worked and works well.  I even setup for my program add entries to Windows registry key so that the .tpml file type is associated with my program executable.  This is related to my previous post here.

  The problem I have is that I did a fantasy for my LabVIEW program icon and these well DOCUMENTED files.  The problem is that the key of Windows registry entry that associates this file in my program, causing the ATTESTED to the 16 icon file icon x 16 my program executable.  If I remove the association in the register, it goes back to the .ico file I made.

  I don't know if I can add my ATTESTED to my .exe file icon so that an association between the two causes the correct icon to be displayed in Windows, or if there is some other entry registry key that I need to do to replace Windows and requires to use my DOCUMENTED file. ICO for the icon.  Anyone know?

  These are the registry keys that makes my Installer:

  HKEY_CLASSES_ROOT\

  .tpml = "tpmlfile".

  . tpml\DefaultIcon = [INSTALLDIR] data\TPMLFile.ico

  tpmlfile = temperature profile XML file

  tpmlfile\shell\open\command = [INSTALLDIR] Profile Editor.exe '%1 '.

  I have all of the isthmus and the brightness I want in this program with the exception of this problem with the icons (less a few problems the keyboard TAB).  As I said, if I remove the entry "tpml\shell\open\command" in the registry, the DefaultIcon works OK.  With this registry in place entry, it uses by default the icon 16 x 16 for "Profile Editor.exe".

  Any ideas?

  Thank you very much for your time and input!

  -Nic

  The solution was that I needed the DefaultIcon key as a child of tpmlfile entry NOT .tpml.  Here is my final registry keys that work like a champ!

  HKEY_CLASSES_ROOT\

  .tpml = "tpmlfile".

  tpmlfile = temperature profile XML file

  tpmlfile\DefaultIcon = [INSTALLDIR] data\TPMLFile.ico

  tpmlfile\shell\open\command = [INSTALLDIR] Profile Editor.exe '%1 '.

  -Nic

• I just bought this new laptop, why I can't download free applications, I get "your purchase could not be executed. ???

  I just bought this new laptop, why I can't download free applications, I get "your purchase could not be executed.   ???

  Hi Jaynecampbell,

  Thanks for choosing Microsoft Community to post your question.

  According to the description above, it seems that you are unable to download apps, you get an error: "your purchase could not be executed. I understand the inconvenience that is brought to you, rest assured, we're here to help and guide you in the right direction.

  I would be grateful if you could answer the following questions:

  1 are you facing the question to download any specific application?

  2. using a proxy connection?

  We will check your time settings and proxy settings. Follow the steps below and we update on the State of the question.

   

  Method 1: Ensure that the date and time are correct on the computer.

  (a) check the Date/time setting by selecting the tile office and then left click on the time in the corner.

  (b) click on change date and time. And then check that the time zone is correct and the time of the internet tab has the ability to synchronize with the time server Internet.

   

  Method 2: Run the network troubleshooter utility.

  (a) open the network troubleshooter utility by sliding into the right edge of the screen, type search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking on search).

  (b) troubleshooting of network entry in the search box.

  Tapping c) or or by clicking settings and then type identify and repair network problems.

  Method 3: If you use a proxy connection, then try to disable the proxy and then try buying.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on Tools and then click Internet Options

  c. click on the connections tab and then click LAN settings

  d. disable the server to use a Proxy

  e. click on apply then Ok to save the changes.

  Method 4: Turn off the Windows Firewall and defender and then try to download the application.

  To disable Windows defender:

  a. place the upper right of the mouse and click on search and type Windows defender and press enter

  b. in the window, click the settings tab.

  c. disable the real-time protection real option.

  d. click on save changes.

  To disable the firewall:

  a. place the upper right of the mouse and click on search and type Windows Firewall and click on settings

  b. click on windows Firewall

  c. click Firewall round toggle the left pane

  d. check the option to disable the firewall.

  Note: Repeat the steps for the parameters of public and private networks.

  
  

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 5: Try to separate the Microsoft account to a local then check if you are able to make the purchase.

  Note: In the Windows store, you will need to click on connect and use the credentials online.
  a. hold down the Windows key + C to display the bar of charms, click on settings , then PC settings more.
  b. in the settings of your laptop, click users and under where it says connected to , click disconnect your Microsoft account and confirm.
  c. after the test, try to connect again by repeating steps and click on connect your Microsoft account to re-associate.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• How can I delete old applications unwanted as well as share my family can't see them?

  How can I delete old applications unwanted as well as share my family can't see them?

  You can hide (you can't permanently remove any purchase) on the cloud via iTunes on your computer: mask and unmask purchases iTunes or iBooks on your Mac or PC - Apple Support (the 'x' could not show when you place your pointer over an application, there is a bug in iTunes, but clicking on its upper left corner must always hide)

• Access a queue within a labview application .exe built

  Hello

  I have a labview application .exe built in which there is a queue. I would like to put items in this queue to a labview vi that exists outside of the application.

  Is this possible?

  Thank you,

  labJunky

  With the correct changes, sure. For example, you can configure a listening TCP port in the .exe and send orders in this way.

  /Y

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• I'm not able to install both on the same PC LabVIEW applications. I have uninstall the first application in order to install the second. Is there a way to avoid this?

  I wrote two LabVIEW applications. The first acquires data from three different devices, displays the data and writes it to a file. The second application reads the data and displays it on the screen.

  Can I install the first application and run it, but I can only install the second application if I uninstall the first application.

  Any ideas as to why this is happening?

  You install applications by using a Setup program created with the application builder to LV?

  What LV version do you use?

  You have a dedicated for each installer build script, or do you still want to change the settings of a single build script (which would be a reason for this behavior!)?

  hope this helps,

  Norbert

• Controlling the STDIN STDOUT of a legacy in LabVIEW application

  I have a legacy DOS base program that runs in a command line interface in Windows.  Normal use which is a type of operator in a command, look at the result, then type in another command based on the results.  I need launch this application, KEEP IT OPEN and send/receive orders from certain TIME CMD line Interface IT IS ALWAYS OPEN.

  Because I need to open this program, I can't use normal Exec.vi system that allows a single STDIN/STDOUT.

  Has anyone else done this?  I heard that it is possible using PERL, but I'm doing it in native LabVIEW, if possible.

  Under Linux, you can use the LabVIEW VIs hose supplied with. For Windows, you can try the OpenG Pipe library.

  WARNING: Only library Pipe works for me but it is not fully debugged software, so beware when using it in a production environment.

  To install the attached package you prefer using the Manager of Package of VI.

• How do I run Labview applications into a tablet with android os

  How to run the Labview application in the tablet with android operating system?

  Can we use Labview mobile module or use the google game for labVIEW data dashboard? How to install in the PC?

  If you had looked at the dashboard of data and some other links on Android, you will see that you can not run a LabVIEW on Android application. Nor can use you a serial port. With data dashboard, you have a pc that runs LabVIEW and publishes to shared network variables. The Android data dashboard allows you to see these variables.

• Error launching of the ' LabVIEW.Application [error Code:-18001]

  Hello
  I have a TS 3.4 mind sequence LabView 8.21 - Teststeps.
  The sequence is called from a Labview-OperatorInterface.
  In a step that run 100 times before without problem I receive all of a sudden the error message:

  ErrorMessage: Error running substep 'run '. Unable to launch the "LabVIEW.Application" ActiveX automation server [error Code:-18001]

  After a restart of the software al NOR-everything works normally again.
  What is this error, and what should I do with it?
  Should I ignore the error and try to execute the step again or not this average tht the ActiveX server has been lost forever?
  How can this problem occur?

  Thanks for your help

  
  

• How to connect USB-ERB24 devices to labview application

  Hi iam, iam new to labview application development using NIUSB-9421 as module input and USB-ERB24 in the output module. I have sucessfully added NIUSB-9421module to my application using 'Digital IO DAQmx create Virtual Channel.vi'. But cannot add this module USB-ERB24 iam. Can someone please tell me how to detect "USB-ERB24" this module for my labview application please tell me...

  I don't think that you will be able to use DAQmx with MCC USB-ERB24. You must run InstaCal (driver of MCC) to install the USB-ERB24 and get a card number for this unit (and build your application with the MCC screws).

  

  I have LV2009 and I'm not able to open your USB_ERB24_test.vi.  The attachment is for USB-ERB24.

  Jean-Marc