Can rebuild a VD (RAID 5), I start the course?
A simple question:
I am rebuilding a raid 5 on a PERC6/i. everything seems fine, my question is can I reboot and start the server without interrupting the reconstruction? I started the process of rebuilding by the card bios menu (so
Thanks for any response. -Colter * edit * the operating system is loaded on a USB key or by the way, I thought that relevant. The raid array is used as a data store on an ESXI installation, so it will be started once, but not for the start itself. Yes, the reconstruction will come just where she had stopped after the reconstruction, and the table will remain online (but with degraded performance) until full. Tags: Dell Servers Looking at the video I can watch only about five seconds before starting the buffering. Is there a way to fix this? Until video break is fully charged before you play. See the article below for more tips. I ask a question, expanding to another thread '', on the start-up and stop SQLFire. My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed. When you start the batch, without no history running, all right. Adding and removing servers in the cluster, also seems to work very well. However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong. I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved. I start locators first, one at a time. When one starts, data dependence becomes apparent. The Locator seems to start, but the sequence goes in a loop around the data dependence. When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover. Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"]. The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '. Both of these appear to be the crux of the matter. I don't know what data it is dependent, because I haven't added all the data that will be persisted. However, the system starts with default records. I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins. I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start. Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old? If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile. It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources. I'll be dilly, or is it a problem in general, experienced by others? I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire. I appreciate your time and efforts. Hello I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected. Please, use the start command to start in the background of a single command window / batch script: beginning of "locator" cmd /c sqlf locator... beginning of "server1" cmd /c sqlf server... etc. Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning... Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt. Thank you
Felicia Post edited by: SumedhWale Can I quit CTF Loader application to start the process? Norton Security Suite suggested that I have cut some Start Up processes to speed up my departure performance. I need to know if I can close the ctfmon.exe from Start Up? Hi MissTheresa99, You can remove ctfmon startup application. If you do not use any recognisation of speech, you can delete it in the process listed in the http://support.microsoft.com/kb/282599. I hope this helps. Windows XP, disk hard imminent failure, can I select continue or setup to start the backup At the bottom of the page that says "imminent hard drive failure", it asks if you want to continue, or the installer. Which is better to back up the hard drive? If the options "setup" means that you know what you are about to install Windows, stop. I take the hunt, put it in an external enclosure and save it by connecting to another machine. If you have a Western Digital hard drive, you can get a 'special' version of Acronis True Image WD's (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order): Acronis True Image Home 11 Why can't I copy my photos modified in the course of an external hard drive? I got 67 photos that have been published, but when I tried to copy on an external hard drive, he copied more than 500 photos! Also, I see no pictures changed in my new folder on my hard drive. What I am doing wrong? Hi jessicam What version of Lightroom do you use? You are able to export these files from Lightroom on your desktop? Could you double check the location under export > export to Concerning Assani How can I resolve USB arbitration does not start error 31: a device does not work Any ideas how to fix or troubleshoot this error. I read the following thread but has not been able to post to the thread (because it was LOCKED). I bought a new Win7 box and VMWare Workstation 7 is installed. It works great EXCEPT that I can't access USB devices. To start the virtual machine, I get an error saying: Disabled host devices USB connections. The connection to the VMware USB arbitration service has failed. Please check the status of this service in the Microsoft Management Console. I watched the news of C:\Windows\Temp\vmware-SYSTEM\vmware-usbarb-SYSTEM-###.log, and there is not much more than the above error. It is shown below: - 10 Nov 05:10:24.039: usbArb | Journal for VMware USB Arbitration Service pid = 3520 version = 3.0.0 build = build-203739 option = output 10 Nov 05:10:24.039: usbArb | The process is 32-bit. 10 Nov 05:10:24.039: usbArb | Host codepage = encoding windows-1252 = windows-1252 10 Nov 05:10:24.039: usbArb | DICT - USER PREFERENCES C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\preferences.ini 10 Nov 05:10:24.040: usbArb | DICT - C:\Windows\system32\config\systemprofile\AppData\Roaming\VMware\config.ini default USER 10 Nov 05:10:24.040: usbArb | DICT - HOST by DEFAULT C:\ProgramData\VMware\VMware USB arbitration Service\config.ini 10 Nov 05:10:24.040: usbArb | DICT - of the SITE by DEFAULT C:\ProgramData\VMware\VMware USB arbitration Service\config.ini 05:10:24.042 nov 10: usbArb-3536. USBArb: From VMUSBArbService args: "VMUSBArbService." 05:10:24.043 nov 10: usbArb-3536. USBArb: USBArbInit failed with the error: 31 05:10:24.044 nov 10: usbArb-3536. USBArb: Stop service, status: 31 - I looked at some of the newspapers (but there were too many pass by) to current user\AppData\Local\Temp c:\users\. Newspapers have been named: vminst.log, vmsetup.log, vmmsi.log. I can post them if it will help, but there are several of them and different copies under different users (admin1, user1, user2, etc.) I tried to manually start the USB Arbitration Service and it starts not (same simple error, error 31 above). I looked for a "AMD USB filter driver ' to turn it off (it worked for someone else) but not found one installed. My configuration is: Hardware: HP Pavilion Elite - AMD X 4 2.6 GHz 8Gig DDR3 SE host: Windows 7 Home Premium, 64-bit (Build 7600) 6.1.7600 Guest OS: Win XP Pro SP3 (but I think that the problem is not related to the guest) VMWare Worksation: 7.0.0 build-203739 I like the speed of the system, but I also met problems disc cloaning (for some reason, the SATA drives are not detected by some software disk imaging). I was able to get the ghost at work but not Acronis, Paragon or. I think that it is a separate issue but leaving it where it is important. In these cases, the messages indicated that the X 58 chipset (I think this is right, but I'm not positive). He is a level too low to follow me. I have fought this same problem on a Vista machine. Try to right click on one of the USB hubs and looking at the details of the driver. If usbfilter.sys is listed open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {36FC9E60-C465-11CF-8056-444553540000} and remove the UpperFilter, pair of usbfilter. I rebooted and it works fine now. Shad NSS4100 RAID DOES NOT START, please check that all components are present Hi, NSS4100 storage system could start the raid10. The message is: -- The RAID boot failure -- All disks are present, as you can see in the picture as an attachment. The system has been restarted twice. Is there a possibility to start the raid without losing data? Thank you, Dan There number so that you can configure for RAID Array (JBOD, RAID0, RAID1, RAID5, RAID5 + Spare and RAID10). I read your posted, the system configured for RAID10. RAID10 is operated like a pair of mirror of data. Here are a few RAID array information: (1) JBOD (no data protection, when your drive is bad.) You have lost all the data). The notion of read/write date is the same for PC. Fast at the beginning, but the data you have on the disk, it will eventually slow down.) (2) RAID0 (no data protection, however, to write the disk data is better in performance. A drive is dead, then the data is lost) (3) RAID1 (data protection. A drive is dead. Others always in activity and degrades performance.) (4) RAID1 + Spare (Similarly for RAID1, just an automatic rebuild RAID1 for when a drive broke down) (5) RAID5: (Protection of data. Minimum of 3 disks. Authorized a disc goes down) (6) RAID5 + Spare: (data protection. Need 4 drives. Auto regeneration when a faulty drive) (7) RAID10: (Protection of data. Working together with the disc into the slot 1/2 is first pair and disks in the 3/4 Groove is the second pair). This is important because the disks in the Groove 1/2 cannot be placed on the slot 3/4 if she already had the information RAID10. Error I've seen since the GUI is like to drive may have been moved or exchanged around unintended. I can't understand how to start the calendar after the migration. I can't understand how to start the calendar of lighting. Documentation, said he will start automatically, but it doesn't. I reinstalled Thunderbird with the XPI in the folder with the exec install and now it works. Install documentation is poor. I use Windows 7 with firefox as my default browser. When I download a program using firefox, I wonder if I want to save the file, and then must go to the download folder to start the download. When I download using internet explorer, I gives me the ability to run the download at the time where it is downloaded instead of save the download. Is there a setting I can change to allow me to run downloads when using firefox instead of record? Hi shortwedge3, You can use the OpenDownload2 extension for the run option when downloading files with Firefox I opened a Web site of the library without specifying "in a new tab. I expected to crush the existing active tab. Instead, he opened in a demi-fenetre on the left, without tab and without all the icons "Min/Max/Close. I can not close it even by restarting Firefox or stop and start the computer. He now appears on each screen in Firefox with each tab. I note the address of the site to be replaced, but the offending site is https://servicing.capitalone.com/c1/login.aspx. There is an 'X' in the top right of the sidebar. Click on the star to bookmark to bring up the bookmark, in the lower left corner, if you see the following, uncheck the box. You can right click a bookmark to display the bookmark properties, uncheck the "load this bookmark in the sidebar". In the sidebar In the list of Favorites library there is unfortunately no column in the list of library of favorites for this feature, but you can click on the bookmark and properties will be displayed on the box under the same information, if you see a drop-down list "gone" click to view the list of properties. If you want to see the extent that you have these bookmarks you export our bookmarks in bookmarks.html file and then view the source and use of find for WEB_PANEL = "true" - I have the extension 'Search all', so I can see how many times the string occurs and where. It has a turbulent history, it is useful as a reference column, but it was destroyed in Firefox 3, after use in a link, use, restoration of use later but not keyworded bookmarks and not places links both where it makes sense to break. Remained at does not not for keywords because they wanted to destroy the mot-cle--Word key lost for a year in the beta version of Firefox 3. Now, it must be eliminated because few people (can) use it (properly), but they will make this inaccessible box first - someone ' else see the additional error with that. Each url address unique Web site, or the URL to a Web site page is added to my place bar/address bar menu drop-down. I don't want any added or registered in the address bar. Many used to be saved only the URL I used it but now, each unique url (and url in a url) that I visit are added to it. How can I stop this? This just started happening. I'm sure it's a simple parameter browser, but I checked and nothing gives an option to control this. Firefox 3.0.17 Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.0.17) Gecko/2009122116 Firefox/3.0.17 You are welcome Can I copy CD DVD-recovery and start? Hello I need to know: Is it possible to copy DVD-recovery on hard drive and then do a fresh install? My laptop does not start a DVD (so far I can't find a compatible DVD-driver to replace the old and damaged - optical driver Toshiba say: no!). The old optical driver was UJ - 831S I bought: UJ - 850 and the BIOS don't recognize it (I use the latest version of the BIOS) A80 - 131 have boot USB! Thank you Hello Well, it s very interesting question. But theoretically, you can try to place the files ghosts since the recovery CD on the second partition of HARD drive and then you can try to start the restore with Ghost utility procedure. As I said I put t know if it will work, but you can try it. Please send feedback. Now for your problem of disc; Looks like a non compatible drive. It happens because of the master/slave/c-salt settings. If the drive supports bad settings of the BIOS does not recognize the drive. In this case, you need a compatible. Yesterday, I downloaded the upgrade to El Capitan in a Mac Pro (early 2008) running Yosemite 10.10.5, and today I can not start the upgrade. The only option I have found is to click again on the download button, but the circle of download rest bike for a long time and ultimately that nothing happens. See if that helps... Start with CMD + r or the Option/alt key to boot from the recovery partition & use utility disk from there to repair the disk, and then repair permissions. What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic. How can I identify which were deleted songs? I always manually move files to prevent this. I'm on Windows 10. Has no way to know that... If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music. Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music. And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected). If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod. Then, set to automatically synchronize the playlist to iPod. Instead of manually managing iPod, you manually manage playlist in your iTunes library. The iPod has no need to be connected. The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes. The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem. Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod). You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead. Since the update cannot return to my home page Since Firefox updated I can't open it with my original homepage. Tried to change through the tools and it shows my home page, but it always opens to the mozilla page. X 1 carbon 2015: how to swap the function keys to just pressing F1 without Fn + F1? I went into the Bios > Config but don't see "mode hot key". Anyone? Hello I am currently working on phase mapping project. I have successfully created a plan of Phase of four different images, however, I have difficulties opening this map of phase. Plan phase is a 2D double table [real 64-bit (~ 15 bit precision)], w How can I make sure that my kids use no other direct email addresses? Summary of the issueOther issues of Windows Live family safety What version of Windows Live Family Safety do you use? Version 2011 (15.4.3538.513) Choose your operating system version: Windows 7 Additional detailsMy son can connect to her fine Hotmai Server 2008 R2 DataCenter keepts restart - HELP! Server keeps on restarting all the 1-2 hours, the event logs show consistent errors... "The process C:\Windows\system32\winlogon.exe (NAS03)" launched the computer restart NAS03 on behalf of the user RMS\camuser1 for the following reason: no title foSimilar Questions
EASEUS ToDo Backup
Paragon Drive Copy or Partition Manager Personal
Casper
Norton Ghost
Please check that all components are present
You can replace it with a different sidebar; Therefore, you can use "Ctrl + B" to bring up the sidebar bookmarks, use "Ctrl + B" once more to turn it took off.
Windows XPUser Agent
I did it in another computer. Put the hard drive inside the USB box and copy DVDs to recovery from another computer.
I bought: TS-L532A CSEL (after flash it inverted csel master OK, bat after formatted hard drive the bios doesn't recognize the optical driver, once again). Then, without windows, without optical driver, because that is not possible the flash.
As far as I know on the Toshiba Recovery CD you will find a ghost to image files.
Usually it of possible to start up from the CD but I have never tried to use these files with Norton ghost utility.
I m very interesting if it worked.Maybe you are looking for