Can Satellite Pro M70-199 (PSM76E) - I upgrade the hardware

Satellite Pro M70-199: PSM76E

How can I PUT it? (HW)

All you can do is upgrade the RAM and HARD drive.
If you need more space on the HARD disk, you can upgrade the HARD drive. This should t be a problem.
The RAM can be upgraded to max 2 GB using memory DDR2 PC2-4200

The CPU or the graphics card update is not possible.

Concerning

Tags: Toshiba

Similar Questions

  • Is satellite Pro M70-235 - possible to upgrade the processor?

    Hello

    Is it possible to upgrade of processor in this laptop (Pentium M 750-1866 MHz) Pentium M 780 2266 MHz?

    Thank you..

    Hello

    Theoretically, it of possible to exchange the processor on your laptop, but nobody will be able to tell if the laptop works fine with the new processor or not.

    You mustn't forget that the BIOS and motherboard is designed for the preinstalled CPU and it s not tested with another processor. Normally a newer or faster CPU produces more heat and I don t know if the Assembly of cooling on your laptop is sufficient for this.

    If you still have the warranty of your laptop you will lose because Toshiba doesn't support the CPU upgrade:
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  • My Satellite Pro M70 itself turns off in the middle of the secuence of startup

    My Satellite Pro M70 itself turns off in the middle of the secuence of startup

    After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
    without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

    The problem becomes bigger and bigger as punishment I can boot any operating system

    As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

    Someone has an idea of what can happen?

    Thank you

    Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

    Well, in this case I would exclude the RAM to malfunction.

    I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

    What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

    In my opinion, you should check the HDD and maybe try another.

    Welcome them

  • Satellite Pro M70-220 - how to start the Advanced Boot Menu

    Which key have to press on my Satellite Pro M70 - 220 starting Win XP, in order to enter the "Advanced Start Menu" - in other words, the menu that gives various boot options, such as safe, last good start Congiguration, start Windows Normal Mode, etc. ?

    On my old laptop Satellite 5105 - S702, it was the F8 key, but by pressing the F8 key on my M70 Pro does not bring up the 'Start Advanced Menu".

    The Advanced Start Menu came on its own a few days previously after an abnormal stop, so it seems that it does not exist on the M70 Pro.

    Thanks for any advice anyone has to offer.

    AlanCB

    Hello

    The Advanced Boot Menu can be reached by pressing the F8 key.
    It s a Windows menu basic and it s any laptop it is.
    It should work on all computers.

    Maybe you can not activate the Start Menu advanced because the Windows operating system is confused upward.

  • Satellite Pro M70 usually power up when the AC

    Hello

    I bought my dad a Satellite Pro M70 for his birthday and it was used for about 3 months. All of a sudden without any reason that it not power up if it is not connected to the AC. The battery registers itself as 100% charged.

    When on AC, everything is fine no problem.

    But when it is not plugged into the AC, it lights. When put under tension however you can unplug the AC and it will all work very well again.

    Any ideas?

    Should I try a BIOS update? or does anyone have any other suggestions?

    Thank you
    Martine

    Hello

    This problem appears at the beginning?
    Sounds a bit like electroninc power supply malfunction and in this case, you should always ask the service provider to Toshiba for assistance.
    Don t worry, seems, the guarantee is valid and each procedure must be done for free.

    But I m interesting if this will help you:
    Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
    Check this option.

  • Satellite Pro M70: How to connect to the internet using a second computer

    I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

    My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

    He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

    I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

    If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

    The virus could have damaged the Ethernet controller, or she affected somehow?

    Is it possible to test?

    Have you advice?

    Hello

    The virus was detected on the laptop you so maybe your PC has also been affected.
    Did you check if the laptop and the PC using the same workgroup?

    XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

    Maybe it helps

  • Satellite Pro M70: Unable to connect to the WLan with ConfigFree

    Salvation in the Forum.

    I have problems with a satellite Pro M70, about gaining control of wireless connections.

    When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

    When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

    Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

    If you are familiar with this problem or something like that I'd be please to know.

    Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

    > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

    It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

    Please check if one of the two control the WiFi network tools and turn off!

    > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

    You should have three different tabs in the utility Configfree.
    The second device settings provides the list of devices, and you should see the wireless network connection.
    Choose and use the button network connections.
    There you should find some encryption settings!

    Also check the profile settings tab and the option called security settings

  • Satellite Pro C850 - 1 H 8 - upgrade the BIOS CPU support

    Hi there are people.

    I'm wandering if there is a possibility of upgrade of the i5 3230 m which is currently in my Satellite Pro C850 - 1 H 8.

    Looking at the options available in the decision-making FCPGA988 and chipset Intel HM70 there seems to be a variety of the i7 available for use.

    The laptop supports processors with a TDP plu max than 35w?
    The bios supports all the CPU upgrade options?

    Cheers, Nick

    In this forum, you will find various discussions on the theme of CPU upgrade.
    I found this one:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=75073

    Paolo and Macius posted some information about the situation of CPU upgrade.
    As you can read in another thread, the CPU upgrade isn't supported. Updates can be made at your own risk, and no one can say if CPU supported by the chipset would be supported by the BIOS.
    Test it if you want, but it's at your own risk.

  • Satellite Pro A120 - I want to upgrade the RAM

    Hello

    I'm looking to upgrade the RAM in my Satellite Pro A120 Model No.: PSAC1E-05C00VEN

    I'm getting conflicting reports as to how this can actually take, some sites say a 1 GB maximum per slot max so 2 GB while most of the others say max 2 GB per slot

    I was hoping you could advise me.

    Thanks in advance for any help you can offer.

    Hello!

    Your Satellite Pro A120 is equipped with the Intel 945 GM chipset and so you can upgrade it to 4 GB of RAM.
    Only models with ATI chipset can be upgraded to 2 GB and I think this is the reason why some sites say that it can be upgraded to 2 GB and others at 4 GB.

    However, for the upgrade of RAM DDR2-RAM PC2-5300 (DDR2-677). You can buy 2 GB modules for a maximum of 4 GB.
    But don t forget that only a 64 bit OS supports 4 GB of RAM.

    Good bye

  • Re: Satellite Pro A300-1EA - difficulties in upgrading the BIOS

    Hello

    I tried to update BIOS on my new Satellite Pro A300-1EA (PSAG9E-001001EN), requested by Tempro, since version 1.50 to 1.90. The system has completely frozen during the BIOS flash, after waiting for an hour, I decided to turn the power off and pray for the best. Thank God, everything works still, but the BIOS is always v1.50, not been updated. I now read so many posts on the forum about the update of the BIOS of marbled and am now very cautious about subject to any BIOS updates at all.

    My questions are: is there about this particular update and/or with the installation of InsydeFlash problems? The BIOS updates are usually all so difficult that they have better be avoided? What are alternative means for updating BIOS, hopefully less dangerous? Also, could there be potential damage to my laptop that is associated with this is BIOS flash a miscarriage I should know about?

    Thank you very much indeed!

    Monsteress

    You can feel happy, my friend! :)
    I m surprised that your ROM module is damaged or something. In most cases, this occurs if the computer hangs during the update.

    Let me give you some advice. You should only update the BIOS if it of needed or if you have questions-problems with the laptop. You can ignore the messages of TEMPRO if your system is working properly. For example I have never updated the BIOS if my phone goes perfect never touch a running system ;)

    If not, follow the advice posted by Akuma before update you the BIOS to close all running programs, disable the AntiVirus and firewall and connect the AC adapter.
    On my Satellite U400, I've updated the BIOS without problems.

  • Satellite Pro M70-220: how to enable the AGP?

    Hi all!
    I recently bought a toshiba M70-220, I discovered that the GPA or accelerated graphics port is not available, I don't know if it is preinstalled, so I would ask anyone there for please help me with what I have to do to enable the AGP, I appreciate all the efforts of everyone. Help, please. Thank you very much.

    Sam

    Hello

    If you have an Intel graphics card, then I recommend to check OpenGL settings in the properties of the graphics card.
    In addition, you can try to start the dxdiag and you will find detailed information. There you should find the AGP texture acceleration option.

  • Satellite Pro A60 - I want to upgrade the RAM

    I bought a second hand Pro A60 and would like to increase its memory. I never have, so I need a little guidance. First of all, the system tells me that I have 2 x 250 MB of RAM. I understand that these are not removable, but I could add a 1 GB extra to give me the max of 1.5 GB.

    I think that the locations of memory are in B4, but when I open it I do not see an obvious empty slot. I guess what I see are among the 250 MB, but nothing else.

    Offers of additional State of RAM installation is simple, but a free slot is not obvious.

    Any help would be appreciated.

    Thank you

    On this laptop, just a slot is placed at the bottom. Turn off and let us know what capacity has this RAM module. You can buy new with more capacity and put it in this slot.
    A RAM is probably under the keyboard. Remove the RAM from the bottom and start your laptop. check the amount of RAM is recognized.

    If mobile shows 256 MB then you can add a RAM in low 1024 MB PC2700 (PA3313U-1M1G) and you will have approximately 1280MB what is the max RAM this laptop to handle with.

  • I need BIOS update for Satellite Pro M70 (PSM75E), but only for the BACK

    Hello world

    Help me!! I'm looking for driver for BACK Bios M70. Does not exist, only for windows and my cell phone is dead.
    Bad news, because after 3 minutes, stop!

    So I have only one solution (with the diskette bootable cd).
    So I need the dos version of the Bios

    Thank you

    This version is not available on the official support page so only one chance to get it is to contact Toshiba service nearest and ask for help.
    Sorry, but I don't see another option for traditional BIOS.

  • Satellite Pro L550-199: how to configure the touchpad + activate WLan in Win 8.1

    Hello

    I can't find any driver as Windows 8.1.
    Is not so bad, if I have an idea, how I can turn on and turn off the WLAN (FN + F8 key) module and how do I configure the touchpad.

    I would like to disable the click of the surface of the Panel.
    Click on should only be mouse button "" on the touchpad.

    Cheers, Mike

    Hello

    _Touchpad options: _
    Press Windows + X
    Then choose Control Panel. Then click on mouse.
    Here you change to the device settings tab
    Click on the settings button and you will get the settings of the Synaptics touchpad where you can change all the options.

    _WLan on / ignore
    Press Windows + C
    Charm bar click on laptop-> network settings

  • Update of the BIOS works is not on Satellite Pro M70-275

    Hey

    Im having a problem, I can not update my bios, I downloaded the right bios file, but when I try to update I get a bsod just until it begins to Flash the bios.

    The biosfile I downloaded is:

    ARKive
    Satellite pro
    Satellite pro M series
    Satellite pro M70 (PSM76)
    PSM76E

    Its the bios 1.70 for win xp

    IM also of problems with my sound, I downloaded the rather and installed, but there is no sound.

    IM using Windows XP SP3

    Concerning
    Lars

    Hello

    BIOS update is necessary? Or what is the intention to update the BIOS?
    Usually if you have some serious problems, the BIOS isn't essential update

    With regard to the sound:
    You can solve the problem in Windows XP, install the KB888111 and KB835221 hotfix before you install the audio driver.

Maybe you are looking for

  • Can I use the Firefox icon on my Web page?

    I am a web designer and I want to use Firefox icon to a page "your browser is old." What are the permits or rules of its use?

  • Looking for Toshiba Satellite A305-6829 recovery disk creator

    I bought the laptop Toshiba A305-6829 * without a recovery disk * in the United States. Due to the decrease in the speed of the laptop I want to reinstall Vista and factory setttings. But I realized that its impossibe unless I have a recovery disk '

  • In the shared folder IdentityCRL I can delete

    I clicked on MY COMPUTER.  He had a folder called SHARED DOCUMENTS Then click SHARED DOCUMENTS containing 4 folders named MICROSOFT, music sharing, shared photos share video I clicked on the MICROSOFT folder and noticed a folder called IDENTITYCRL I

  • Windows 8 scanning on officejet 8500 has more

    After the upgrade to Windows 7 to 8, I am unable to scan using my OfficeJet 8500 has more.  Downloaded the latest troubleshooting and printer seems to be installed, and is the default.  I am able to print, but when I go to print Center and select the

  • LR display differently on two different ipads

    I'm a complete newbie to Lr!On ipad (1), it seems very well and shows my two collections and Photos from Lr, who are also on my desktop version of LrHowever, on ipad (2) he just "Camera Roll" at the top of the page and just displays the photos ON iPa