Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?
Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?
Hello
Detect and automatically fix problems of CD/DVD
http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC
Please make all below even if you have done some before as it is often the set of operations which solves
the question.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
This is a recent development. Next week there is or not, it wasn't a problem. Now, I can't download regardless of the source of the device: i.e. iphone, camera, etc. Now, I get the message that says Photo Gallery can't open this photo... the file may not be supported, damaged or corrupt. How can I fix it? Thank you in advance for your help!
Hello
Thanks for the reply.
Follow the steps to solve the problem:
Method 1: Scan SFC Run in the computer
Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows system files
http://support.Microsoft.com/kb/929833
Method 2: Create a new user account and verify that the problem occurs in the new user account as well.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the issue is resolved, please follow the instructions in the link below:
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Method 3: Run a place upgrade to repair your operating system
How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.Microsoft.com/kb/2255099
Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.
Please follow these recommended steps and post if you still experience the problem.
-
Can someone help me with an installation on Windows 8 download CS2?
Can someone help me install CS2 download. I'm on Windows 8. The guest of guard asking me to insert disk 2. I opened all the files in the folder by following the instructions, I even tried to copy discs, but nothing seems to work.
CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
-
I need help setting up a network between Windows Vista and Windows 7.
original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER
HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER
Hello
You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows
-
Can someone help me to assign touch controls to lights and media player
Hello
Please can someone assign me the first two keys to turn lights on or off and open windows media player?
Someone said that if I go into Toshiba Assist - optimize - Support Button Toshiba I can do here, but how? Anyone know?
See you soon.
If please don t post twice on the same theme and follow the first thread you created:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=41600&TSTART=0 -
Can you help me on my problem of Windows Vista Sidebar?
Well, last night I installed window Sidebar Styler so I uninstalled with Revo Uninstaller, I accidentally delete some files from window Sidebar I think? so when I saw to remove files that I cancelled that it then after that my sidebar no longer works I get installer that I couldn't find a. I look for the solution that nothing works... Can you help me? Thank you
Hello
Try a restore of the system back to before that you did:
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
If this does not work, contact the manufacturer of this program to get advice.You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I installed Dell Windows Vista on the Vaio, I can't do the drivers and software
I have the Sony Vaio VGN-CR220E Vista Home Premium was pre installed on. I had to reinstall and borrowed A friends Dell CD. Nothing works right. How can I get the right programs for my Vaio
It does not work like that
You cannot use a disk from Dell on a Sony Vaio.
http://eSupport.Sony.com/en/VAIO
Here are the General news for the recovery to factory settings:
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
See you soon.
Mick Murphy - Microsoft partner
-
can someone help me I have a problem with tidynetwork
This virus or anything that turns words ordinary links
Hi Louie,
1. What is the issue you are having with tidy network?
2. the problem occurs with any particular application or all applications?I suggest you try the steps from the following link:
How to remove a computer virus?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
I'm very, very ugly, slow typist. I need to find somewhere I can talk in person on fixing xp sp3 op sys malfunction. Windows updates fail to install, sys. restoration doesn't seem to work, restored backup a few sys.files double on drive c, slowing comp.down. Condition appears to have caused the error in the security program, I had to uninstall and reinstall the program, etc. perhaps? I have to re - install windows xp but I don't know how. Please... There will always be this typing I do . I could buy a new computer, but I got used to my old xp - a bit like an old car. I repaired him before and she has functioned well for a long time, but now I'm stuck. If I could fix it itself toward the top without spending a fortune, I'd rather. I would really like to find some PERSON who speak who is knowledgeable enough to help me find the right help or information to do the job. Or who-knows - what was that last line in Casablanca? Thank you, hope to talk to you soon.
3 initial suggestions. 1, practice with typing you will get better 2, you could get a microphone and a program that automatically what you say tape and 3. You can also get a microphone to talk to someone to voice chat (for example Skype) rather than in person to help you solve the problem.
-
Please enter the details as much as you can so I can learn to do this for a client, I thank you famous Dex - I get paid (shot of @_ColeBennett_)-YouTube
If you want to say things like this:
and this
So, let me start at the top. Most of the stuff you see is drawn on a framework at a time using the painting tools. Some like the second shot can be done using a mask (hand-drawn), then the Scribble added. The lower part would be an expansion or animation of the mask. There is no automatic way to do this with images as images in the source video.
To learn how to use the paint tools in the paint type AE in the search help field in the upper right of the AE and learn about the resources of the community.
One last thing. Each shot with the effect of the painting should be a separate composition. You'll go nuts trying to put together a minute two video with hundreds of shots in a single model. No professional could work like this. If it were my project, I would take just the frames I wanted to paint in a shot and make sure COMP IOW, for the second example, it lasts about 20 executives is how long my comp would be, so I would have cut off the rest of the shooting. There is no need of roto or paint on all frames that you won't use.
-
Basically, I can't find the "system requirements" so if someone could guide me to do this or maybe tell me the solution to this problem, it would be great!
Thanks in advance
<-this guy
Photoshop - http://helpx.adobe.com/photoshop/system-requirements.html
The best way to find the required configuration is to Google search. In this case the search terms are "Photoshop system requirements.
-
I just installed firefox and I didi as always.its the firs time when its like that
Hello
Try this and see if you have more page set as your home page. How to set the home page
Jack
-
Can someone help me with an answer on how to remove the Tdlmbr-A virus from my system.
Any advice would be much appreciated.
I use Webroot Antivirus and will not remove it.Thanks PhilHi Phil,
You can read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.
Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.
Hope this information is useful.
-
Why can't scan with my MF1450 on my Windows Vista? The printer works.
When I run the "test" option that appears when I open Control Panel Scanners & printers, it is said that she read the scanner. But when I try to scan, I get a message telling me that the drivers are not installed. I did a standard installation, when 3 years ago, I bought the mf machine and it still printed, but I could never analyze. I'm afraid to redo the installation disc, afraid he might stop printing. Also, I went to the site of Cannon and downloaded drivers, I thought he said is went with my machine, but it still gives me the same message. I still have my original softward installation disc supplied with the machine.
Get in touch with support of Canon for additional support:
Canon support
http://www.USA.Canon.com/Cusa/support -
I tried to figure out how to download music in my I pod 7th generation nano. Can someone help me? I was getting confused by all the information I read. I have an external hard drive that I'm loading my music, then I get lost. I need help.
yduncan,
https://manuals.info.Apple.com/manuals/1000/MA1624/en_US/iPod_nano_2015_user_gui.PDF
Maybe you are looking for
-
I don't know when this started, but recently whenever I visit Web sites that use some or a lot of Flash, Firefox slows down completely. When I went in my task manager, I saw that FlashPlayerPlugin.exe was using a lot of CPU (109, 396 k to be exact).
-
Can I link an LED on front panel for a specific element in an array of Booleans?
In LabVIEW 2010, I have a string of LED. I and array of boolean values that contain the values that the LEDs have to indicate. What is the best way to connect the LEDs to elements in the array of Booleans? Can I link an LED on front panel for a speci
-
Exact model of my Pavilion G6 series
Hi all I just reinstalled my laptop and now I'm struggling with drivers I can't take the exect model because there are many series of the G6 series, it is about 53 and I downloaded so far from the 10 already and I still cannot find the correct driver
-
How can I change the automatic sync date and time in Windows XP?
present to said 05-24-2012 at 04.01
-
I have a new Dell computer with windows 8, and I had a breakdown of DirectX. It can not be recovered it is said. I reloaded the game and windows 8 and the problem persists. How can I fix a fatal breakdown of directx?