Can someone help me with the problem of Vista Home Wireless (unidentified network)
I recently replaced my wireless router and now I get "Unidentified network - Local access" when you try to connect to my network.
Hello
Position of your router would be suspicious here. How you are positioned in the router? Are there
obstacles in the path?
Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
Download - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).
Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.
I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.
-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194
Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us
----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx
I hope this helps.
Tags: Windows
Similar Questions
-
So I'm having a very strange problem with my wireless adapter. (surprise, right?) Let me explain just what is happening here: I will use my computer, online, do a lot of things like play games or surf the web. Randomly, for no apparent reason, my wireless adapter disconnects the current network disconnect myself from everything I do. When I check my available wireless networks, I can't see a single network. This has happened to me for a while. When he started it first, I tried many things including the uninstallation of a reinstall of my adapter without success. I have to restart my computer to fix. This happens from time to time and has not stopped since the first occurrence. Originally, if I would try to find a network or uninstall/reinstall, my computer would be soft locking and I would be able to use the windows closed functionality, it would just hang out there indefinitely until I hard loaded. Now its being less skittish and let me do a reset software to fix, but it becomes very annoying. I know this isn't my router because all my roommates can still connect to the network very well, and the router will not prevent me to see many (15-20) wireless networks in the region. If someone can help me even by some light on what is happening, I would be very grateful, because I'm getting very frustrated by that. I reinstalled the map, he pulled for dust, etc. etc. It is not usb and its actions with the system. The Device Manager it says as a 802.11n wireless adapter PCI Express LAN Card, manufactured by LITE-ON TECHNOLOGY CORPORATION. Connected to the 4 PCI bus, device 0, function 0.
Thanks in advance:
Justeroo
Try without commitment TCP/IPv6 (which is done by going to network connection > click > properties > it uncheck > OK.)
http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/
See you soon.
Mick Murphy - Microsoft partner
-
I got nothing else problems with windows update (I use Vista home edition), and now I have the following:
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Device Type Microsoft ISATAP Adapter #3 device peripheral status does not work correctly. Windows cannot load the required device drivers. (Code 31) Plug - and - Play ID ROOT\ * ISATAP\0002
I would really appreciate the help.
Thank you
KarenHello
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
http://support.Microsoft.com/kb/932520/en-us
See you soon.
-
Can someone help me with the problems of re-installing CS4?
I had to reinstall CS4 and despite download of every single update etc I can lay my hands on it is not yet read RAW images in Bridge he read fortunately before I uninstalled and I cannot get my Epson printer to work with her - all looks great until the icon of the printer just blinks upwards and disappears after 2 seconds and zero impression occurs. Adobe are not interested, told me to go buy CS6, but I did not have £650 and don't see why they should stop giving aid just because they got a newer version... Any ideas?
5.3 or better should read nikon D3X files.
to determine your version and troubleshoot camera raw: http://helpx.adobe.com/x-productkb/multi/troubleshoot-camera-raw-photoshop-photoshop.html
-
original title: windows dates
on my computer windows vista home basic, is Drive - D were all my windows updates are stored. I do not stor photos or other long-term files on my computer.
I ' am up to 22 gigabytes of 69.5 gigabits on drive D. Can someone help me with this problem so I don't run out of space.
Also all update my windows go back as far as the year 2008. Note-windows update are the only element which appear on the D drive and also when I backup windows is were I notice less space on this drive. Is there something I can do so I don't run out of space on this drive?
could someone help me with this problem.I have found, do not delete the old windows updates.
they could corrupt your entire system. -
I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works. The Nook also works in a Barnes & Noble store it seems so that the works of Nook. I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.
Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...
http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport
.. .also than that...
http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/
Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.
See also this about WPA2 on the MN-700...
-
Hello! Can someone help me with the address of repair service for Palm TX?
Hello! Can someone help me with the address of repair service for Palm TX?
Good luck and please, let us know here how it works for you. We like to know current resources, which can help to solve the problems of people with these older devices.
-
can someone help me with the link to download hp2050 print drivers that are compatible with windows 8, my software CD is not compatible with windows 8, and I can't use the printer now.
Hello
The installation program "Full Feature" can be found on the following link.
Kind regards
DP - K
-
I am trying to download adobe 10 but my computer says that it is blocked and dangerous to download. Can someone help me with this problem
Temporarily disable your Antivirus utility and try again.
-
Clouds (can someone help me with the error code 214?)
can someone help me with the error code 214?
Hello
Reference:--
Error in downloading, installing or updating Adobe Creative Cloud applications
-
HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?
The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path. These pixels are rasterized and based and cannot be resized without loss of quality. You have options. If you want to enlarge the raster layer, transform the work path and stroking again. Or work at a resolution higher, in the first place.
Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.
-
Can someone help me with the set up for skydrive file sharing?
In my photo app I am developing the home section. He told me to right click on SkyDrive in the bar tasks, select settings and check "Allow me to share all files with this pc" is turned on. It is, but when I try and access the photos app hosting I still get the same message. Can someone help me set this or tell me if I do something wrong?
Sharing of the checkbox in the settings of SkyDrive is not related to the photos somehow app.
Sharing checkbox in the settings of SkyDrive, it's what allows you to go to another computer (such as your office or library) and then go to skydrive.com to access the files on your computer.
-
I'm trying to uninstall a printer, but only part of it was uninstalled, there are 2 parts more than the necessary printer uninstalled and I get the message setup.exe has stopped working
Hello
· Faced with this problem specific to uninstalling the application with the printer, or with another application?
· What is the brand and model of the printer?
You can follow the method below and check if it helps.
Method 1:
I would say as you put your computer in a clean boot state and check if it works.
How to troubleshoot a problem by performing a clean boot in Windows
http://support.Microsoft.com/kb/929135
Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 on top of the kb article.
Method 2:
I suggest to install the application printer again and then try to uninstall it, if only the problem is specific to the printer.
http://Windows.Microsoft.com/en-in/Windows-Vista/uninstall-or-change-a-program
Hope this helps,
-
Can someone help me with my problem on the Internet connection sharing?
I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.
I am currently using windows 7. I hope some of you can help me thanks.
It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.
Hello Fritz,.
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the issue.
This problem may occur because of corrupted network drivers or incorrect network settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooting and check.
Reference:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7If this does not help, use method 2.
Method 2:
Use the steps described in this article and check the issue.
Reference:
Wireless and wired network problems
http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1Additional information:
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Hi all
the OS is Windows 7 SP1 32-bit Enterprise Edition.
I use an important banking software package called ORF more than Misys, the application is critical for the company, the problem occurs after the installation of Microsoft Office 2010 Professional Plus with Service Pack 2; the ORF more crashes when you try to print to a PictBridge compatible printer.
I get the following message from crash:
Signature of the problem:
Problem event name: APPCRASH
Application name: orfplus.exe
Application version: 5.0.1.0
Application timestamp: 3f6f479b
Fault Module name: StackHash_802d
Fault Module Version: 6.1.7601.22436
Timestamp of Module error: 521eaab0
Exception code: c0000374
Exception offset: 000c38b7
OS version: 6.1.7601.2.1.0.256.4
Locale ID: 2057
Additional information 1: 802d
More information 2: 802d0d721d077b7993d17470b8164201
3 more information: d6a2
Additional information 4: d6a2e9e6b15ae70428294b9407d7e88dRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt----
I tried to exclude the orfplus.exe of the DEP, but that does not solve the problem, the application always crashes when I try to print a report.
----
As a result, we are unable to upgrade our office staff of Office 2010 Professional Plus application.
I appreciate if someone can help me solve this problem.
Thanks in advance.
Hello Matt,
According to the issue description, it seems that you are connected to a network domain, so I suggest you to republish your query on the TechNet forum and I hope that you will receive a response it a better way that they are trained on the computers in the domain and their settings.
http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro
Thank you.
Maybe you are looking for
-
Need pinout - T4600c LCD screen
Could someone send me the pinout of this LCD Panel. Computer laptop itself is buggy, but I want to use the screen on another PC (of office).It can be done, but I need the pins available to turn on... Manufacturer of the screen is ok too, because mayb
-
Satellite A200: No audio after update SP1 and NET Framework
Hello After my laptop Satellite A200 update Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 andInternet Explorer 8 for Windows Vista, the speakers and the headphones stopped working. When you go to
-
External 1 TB HARD drive not recognized PS3
Hello I brought a 1 to external yesterday, had home loaded up, went to the to connect to the PS3 via USB and my PS3 does not recognize. I called the computer store, that they said that I had to format, so I followed the instructions to change the set
-
Hi all I'm doing the analysis of the spectrum of a 2D array. In this case is Amplitude (Y) depth (X) vs. The problem is that the depth (X) is not a constant dt so I can't create a normal waveform as an input for the power spectrum analyzer or spectra
-
Attachments of any file type flashes and disappear when you try to open.
Attachments of any file type flashes and disappear when you try to open. Downloads act like they work, but do not. No file is on the hard drive with run or save. Used email is yahoo and hotmail. This is my mother's computer and I have no idea whe