Can someone suggest how to store the date/time format just for restoration

Similar Questions

• Can anyone suggest how to reduce the size of the text

  Can anyone suggest how to reduce the size of the text here, and most of the other programs

  used? I'd be happy if someone could tell me how. I looked everywhere, but

  no luck!

  Best regards, Reltsen

  Hello

  Where exactly you want to reduce the text (browser, Explorer or on any application)?

  If you try to do it on a web browser like Internet Explorer see the link for the procedure.

  You can also check this link

  Thank you.

• Can someone explain how to operate the .prel files?

  Can someone explain how PREL files work?  My C drive is o/s and programs, my D drive is the storage and project files (the file .prel) are on my E drive.

  How is this supposed to be more effective/more fast?  P.E. (drive C) must constantly communicate back and forth on disks with the .prel file and all files in subfolders?  It seems it would be slower.

  As I said in a previous post; My zooms in/out of the timeline are VERY slow.  It's almost 1 second before the scenario becomes greater/smaller.  Any info would be great, thanks!

  Elwood
  

  Windows 7 64 bit, i7 980 x @333 6 hearts, 12 GB of ram DDR 1600, Radeon 5850 GPU EP 9

  Using several HARD drives, is spreading the load of IO (input/output) on different HARD drives. The controller is faster than a single HARD disk, being responsible for read/write from/to multiple locations. One of the first laws of physics is that an object can be in several places at the same time. The heads on a HARD drive are no different. If for several readings are requested, the heads will be positioned on place on trays, read and then move to the following requested location and so on. However, with multiple HARD drives and a controller of good, fast, heads of each HARD disk will be placed, if necessary, so the readings are are at the same time on several sites.

  For optimal performance, a good Setup would be as follows:

  C:\ system operating system and programs (more reading here that writing)

  D:\ Project (in this case PREL) files

  E:\ RAID 0 Scratch disk for media Cache, but does not make the files (read and write)

  F:\ RAID 0 media files (more reading, but also write)

  G:\ RAID 0/share in export and rendering files

  Some even separate the video Audio assets assets and use another RAID 0 foreach

  The disadvantage of this configuration 'ultimate performance', is that when a project is completed, to clean, move of many HARD drives and locations. There may also be issues at the check in a project, because things are scattered.

  I get "good performance" by having my project, Copies of my assets and all disks from Scratch on a HARD drive. What I give up in performance, I compensate with the household chores, when the project is completed. Still, I expanded my OS/programs of my projects, with physical HDD separate.

  Good luck and we hope this helps,

  Hunt

  PS - Above, I mentioned RAID 0, but still more speed can be obtained through many HARD drives in the table and perhaps a RAID 50. RAID 0 is only two physical HARD disks. Also, for the RAID, I recommend a card dedicated RAID controller and NO software or capacity RAID of the MoBo.

• Can someone explain how to use the addProcessFormChildData API?

  Hi gurus:
  I have a scenario where; I need groups implemented in AD using AD connector as part of provisioning of the IOM to AD users. These Don t groups are already available in IOM, but these are received as parameters of authoritative source.
  I read the different thread, but can not find how to use the addProcessFormChildData API to perform these forms of child.
  Any help would be greatly appreciated!
  PD: My English is very bad!

  Use this post

  How to remove data from the user for the child form?

  How to find the key to AD provisioning process instance

  These will be useful.

• Can someone explain how to clean the screen of the iPad?

  Ok. MY iPad screen continues to become dirty when I use a cheap touch screen stylus. Can someone explain how to clean iPad screen?

  See here: cleaning of your Apple - Apple Support products

  -AJ

• I had no success to determine how to change the date, time, attributes etc (although the name can be changed) files in Vista Home Basic that I was able to do in Windows 98 Second edition. __Is their a reasonable solution to this? __Thanks

  It is my first visit to this feature of Microsoft Internet.  It defines a model for constructive citizen of the world form a more perfect union.
  Thank you.

  A "more perfect union"? Really? I'm not terribly interested in forming a union with a person, perfect or not, but I'll gladly try to help you with your it questions. To do this, you will need to provide more information about your computer and your questions clearly and concisely in the body of the message, not in the subject line. These links will help you with your next post:

  http://www.elephantboycomputers.com/page2.html#Usenet (you can ignore the references to Usenet discussion groups / as you post on a web forum, but any suggestions on how to write the post are applies here too)

  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Change the date and time of Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-the-clock

  Don't know what you mean by "attributes".

  You change a file name in Vista right click on the file and then left-click 'Rename' or by clicking the file to select it by pressing F2. MS - MVP - Elephant Boy computers - don't panic!

• can I redirect where firefox stores the data (bookmarks, cookies, etc...)

  I am currently using a product called Deep Freeze on my desk that resets the computer on the setting "frozen" to reboot. The issue I'm having is that I can't remember bookmarks, history, cookies and other data when browsing with Firefox. I was able to redirect IE but can't seem to find a way to do that easily with Firefox.

  You can do this by creating a new profile and choose a custom for the profile folder location.

  To create a new profile to follow the instructions in the article create a new profile for Firefox on Windows , but in last step, you click on the button Choose a folder to specify where the profile is kept.

  A warning regarding where you create this profile folder.

  (Copied from the mozillazine knowledge base) A profile folder is not automatically created when you choose the location of the folder to your new Firefox profile. Any file you select becomes the profile folder. If you want to choose a location for your new profile, do not select a folder that contains existing data. You must create an empty folder (preferably with the same name as the new profile) and then select that folder in the Profile Wizard. Note: If your operating system does not provide a "New folder" button in the Profile Wizard, you must manually create the new folder.

  If the folder that you select for the new profile contains files non-Mozilla (for example "my documents" on Windows), your profile data will be be mixed with non-Mozilla data. This can result in the loss of all the data in this file, including the non-Mozilla files, if you subsequently delete the profile.

  For more information about the Profile Manager and using profiles see Profile Manager - MozillaZine Knowledge Base and use the Profile Manager to create and delete profiles Firefox.

• How to write the Date/time of the PDM file property

  On the page root of the PDM file, there is a predefined, property called ' Date/Time' in the first row.

  I would use it to save the timestamp when the tdms file is created. But in the help file.

  I find that the following property constant. So, how can I write to the field of property ' Date/time '?

  Property	Constant	Data type
  Name	TDMS_FILE_NAME	String (char *)
  Description	TDMS_FILE_DESCRIPTION	String (char *)
  Title	TDMS_FILE_TITLE	String (char *)
  Author	TDMS_FILE_AUTHOR	String (char *)

  Thanks for any idea or suggestion.

  You are not sure if it's exactly what you want, but have you tried that?

  CVIAbsoluteTime            CVItime, *t = NULL;
  TDMSFileHandle          deH = 0;
  
  // Create TDMS file and set some properties
  errChk (TDMS_CreateFileEx (file, TDMS_Streaming2_0, TDMS_ByteOrderNative, 0,"example.tdm", "someText", "title", "author", &deH));
  
  // ...
  
  GetCurrentCVIAbsoluteTime (&CVItime);
  errChk (TDMS_SetFileProperty (deH, "Date/Time", TDMS_Timestamp, CVItime));
  
  // ...
  
  // Save and close fileerrChk (TDMS_SaveFile (deH));TDMS_CloseFile (deH);
  

• How to disable the Date/time and the side Pop out window of Windows 8.1

  When I move my cursor/arrow on my touchpad on my laptop 11 flow through the office, or sometimes on a web page, for example, the date and time pop - up down to left and the research / action / start / devices / Setup window appears on the right side of the screen. It makes me crazy. How can I disable this feature of the software?  If I need them, I can simple enter the windows on the bottom of the screen icon. In its current form, it is playing all the time and I want to turn it off. Thank you.

  HP PC laptop flow 11 model: 11-d010nr, product number: K2L95UA #ABA, file system NTFS, Intel Celeron CPU N2840 2.16 GHz, RAM 2.00 GB, 64-bit x 64 based processor, 8.1 with Bing Windows operating system, HP USB 3.0 flash drive 128 GB, Sandisk Ultra SDHC 32 GB FAT 32 memory card

  Hello @BubuBaby,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Notebook PC 11 workflow and settings of Touchpad not working not properly. You can disable the popup of charms by right-clicking on the desktop go to properties. In the properties of Navigation window and the taskbar, click the Navigation tab and uncheck the box - when I point to the upper right corner, show the charms.

  Here is a document on how to troubleshoot the Touchpad, if you need it.
  
  If you proceed to the section setting of TouchPad pointing the sensitivities it should help solve the problem. Enable or disable individual gestures by clicking the check box next to each item. A check mark in the check box indicates that the gesture is turned on.
  
  Hope this fixes the Touchpad settings.
  
  Thank you.

• Camcorder car bought in Asia, how to change the date/time United States?

  Hi, I bought the unit in Hong Kong and brought it to the United States.  After I've set the date and time, each time it starts, it is synhronize to the time and date in Asia, which is 15 hours ahead of time.  I tried to find it in the manual on how to change the region, but could not.  Is there a way I can do?  Pleaes help.  Very much appreciated.

  I found it under Satilliate synchronization, I had to press OK again to UTC is displayed.  Thank you very much for the help.

• How to consume the data model library adf for the project?

  Hello
  
  I use Jdev 11.1.1.6.
  
  I have a workspace Jdev containing the business component (entity objects, view and application module objects exposing the your). This workspace is deployed to a library of the ADF. This library is packed with DB connection details.
  
  I have a different workspace Jdev which needs to consume this library of ADF data model. This workspace is actually just the layer view (no business at all components).
  I added the data library ADF model to his draft opinion and it is showing application module and your sub of the data controls.
  
  My question is: how will this project view to connect to DB when running?
  It allows the connection of packaged data model ADF Libabry? If so, how?
  or should I create a business under this workspace view, just the purpose of connection project? If Yes, then what is the use of connections, including creating the library of the ADF?
  
  Thank you
  JAI

  Hello

  It uses the connection in the library of the ADF. However, I recommend that not save you the database connect information in the library of the ADF. Instead:

  -set the ADF BC model to use JDBC data sources
  -In the library of the ADF, configure it to contain only the name of data source
  -In the view project (the workspace) set up the database connection that is exposed by the library

  When the library is imported, verify the Application resources--> connections and right click on the name of the connection that is imported to configure

  Frank

• How to set the "data repetition" as default for all columns property

  Hello
  I have a report of existing response that has 260 columns. I want to put all the columns on the report for data "repeat" I can dump the data in excel. Y at - it a shortcut to do this, or do I have to manually update each column?
  
  Thank you
  Ankur

  No, if you don't have that, you should ask your administrator. Other that, you must do it manually. I'm sorry.

  Don't forget to close this thread. You can grant some points as well. Thank you.

• Can someone help me pls with the compaq presario s3030il drivers for Windows XP

  the HP site doesn't it have not please help me

  Hello:

  Here is the link to the product for your PC:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00005277&lang=en&cc=us&TaskID=101&prodSeriesId=307003&prodTypeId=12454

  I can give you links to all the drivers, but the card network and modem based on what I see on the link.

  For the network card and modem, if you do not have the drivers for them already, please click in the Device Manager. Then click on the Details tab after the first string you see.

  Those who will identify the make and model of the network adapter, and I can send you the link for the drivers.

  Drivers: Install in this order and restart:

  Chipset: Download and run the first file listed.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=8178&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

  Graphics card:

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=9033&lang=eng&OSVersion=Windows%20XP%20Professional * & DownloadType=.

  Audio (I think): If this driver does not work, please post the device details like I asked you to do for the network card and modem.

  Accept the agreement. Download and install the 6th on the list (Windows 98Gold/98se/Me/2000/XP/2003(32/64 bits) for driver only. For Windows 98 SE, DirectX (R) 8 is required to enable advanced features. (Executable file))

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=23&PFID=23&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• How long is the production time and delivery for you guys? Thank you! :)

  Hey,.

  Just ordered an Alienware 13 on i7 as a basic model specifications (no extra stuff)

  I ordered it on Sunday, so of course it won't be treated summer Monday, what is your guys to experience with the time it takes to produce and deliver? many people say 14 to 21 days prior to delivery which is very good because it must be built.

  Would be pretty cool to hear from you guys and also see how the mines at the moment :D

  Thank you!

  Yes the process takes around14 to twenty-one days, but you can keep checking the status of the order on the Dell website or you can send me a PM with the order number and a brief description so I can provide you with an update.

• Can someone suggest an order of the shutter for an A77II good wireless

  Hello

  I'm looking for a decent wireless control to take pictures and I see a couple like the type of watch and fob type bit but I would like to hear something about them before I want and dump a lot of money into one, such as sony watch is $ 150 of the suggestions?

  Bowmaster

  RMT-DSLR2 remote control wireless ($29.99)